The 2015 Ford F-150 is a robust and succesful pickup truck. In case you’re planning on towing a trailer, you will want to put in a brake controller to make sure that your trailer’s brakes are working correctly. Putting in a brake controller will not be a tough activity, nevertheless it does require some fundamental electrical information. On this article, we’ll stroll you thru the steps on how you can add a brake controller to your 2015 F-150.
Earlier than you start, you will want to assemble a couple of instruments and supplies. You may want a brake controller, a wiring harness, a drill, and a screwdriver. You may additionally must seek the advice of your truck’s proprietor’s handbook to find the right wiring diagram. Upon getting every part you want, you are prepared to start the set up course of.
Step one is to find the brake controller mounting bracket. The bracket is normally situated underneath the dashboard, on the motive force’s aspect. As soon as you have discovered the bracket, you will must drill a couple of holes to mount the brake controller. As soon as the brake controller is mounted, you will want to attach the wiring harness. The wiring harness will join the brake controller to the truck’s electrical system. As soon as the wiring harness is linked, you will want to check the brake controller to ensure that it is working correctly. To do that, merely apply the brakes in your truck and ensure that the trailer’s brakes are additionally engaged.
Mounting the Brake Controller
To mount the brake controller, you have to the next instruments:
Phillips head screwdriver
Flat-blade screwdriver
Drill
1/4-inch drill bit
1/2-inch drill bit
7/16-inch wrench
Wire strippers
Electrical tape
Drilling the Gap for the Brake Controller
1. Use the 1/4-inch drill bit to drill a pilot gap within the desired location for the brake controller.
2. Use the 1/2-inch drill bit to widen the opening to 1/2 inch.
3. Insert the brake controller into the opening and tighten the mounting screws.
Wiring the Brake Controller
1. Join the purple wire from the brake controller to the constructive terminal on the battery.
2. Join the black wire from the brake controller to the adverse terminal on the battery.
3. Join the blue wire from the brake controller to the brake change on the brake pedal.
4. Join the white wire from the brake controller to the bottom terminal on the chassis.
Testing the Brake Controller
1. Begin the engine and apply the brakes.
2. The brake controller ought to activate and the brake lights ought to come on.
3. If the brake controller doesn’t activate, test the wiring connections and ensure that the brake change is correctly adjusted.
Connecting the Trailer Brake Wires
Now that you’ve a appropriate brake controller and the mandatory instruments, listed here are the detailed steps to attach the trailer brake wires:
Step 1: Collect Your Supplies
Earlier than beginning, guarantee you’ve gotten all the mandatory supplies, together with the brake controller, wiring harness, electrical tape, wire strippers, and crimp connectors.
Step 2: Find the Wiring Harness
Establish the brake controller wiring harness in your truck. It’s sometimes situated behind the dashboard or underneath the steering column.
Step 3: Join the Energy Wires
Join the black wire from the controller to a floor level on the truck’s body utilizing a crimp connector. Join the yellow wire to a continuing 12-volt energy supply, such because the battery or ignition change.
Step 4: Join the Brake Output Wires
Establish the blue and purple wires from the controller. Crimp the blue wire to the brake gentle change wire, sometimes a inexperienced wire, utilizing a butt connector. Crimp the purple wire to the stoplight wire.
Step 5: Join the Trailer Wires
Find the trailer’s wiring harness and join the controller’s black wire to the white wire on the trailer. Join the controller’s yellow wire to the brown wire on the trailer.
Step 6: Join the Brake Sign Wire
Join the blue wire from the controller to the blue wire on the trailer’s brake circuit. This wire sends the brake sign to the trailer’s brakes.
Step 7: Double-Test and Insulate
Completely test all connections to make sure they’re safe and insulated. Wrap electrical tape round all uncovered wire ends and any connections made with crimp connectors. This prevents quick circuits and ensures a dependable connection.
Step 8: Check the System
Join the trailer to the truck and take a look at the brake controller. Press the brake pedal and observe if the trailer’s brakes are activated. Regulate the controller’s settings as wanted for optimum braking efficiency.
| Wire Shade (Truck) | Operate | Connection |
|---|---|---|
| Black | Floor | Truck body |
| Yellow | Energy | Battery or ignition change |
| Blue | Brake Sign | Brake gentle change |
| Crimson | Stoplight | Stoplight wire |
| Wire Shade (Trailer) | Operate | Connection |
|---|---|---|
| White | Floor | Controller black wire |
| Brown | Energy | Controller yellow wire |
| Blue | Brake Sign | Controller blue wire |
Putting in the Brake Mild Change
The brake gentle change is accountable for activating the brake lights when the brake pedal is depressed. To put in the brake gentle change, observe these steps:
1. Find the brake gentle change on the brake pedal meeting. It’s normally situated close to the highest of the pedal.
2. Disconnect {the electrical} connector from the brake gentle change.
3. Use a wrench to take away the brake gentle change from the brake pedal meeting.
4. Apply a small quantity of grease to the threads of the brand new brake gentle change.
5. Set up the brand new brake gentle change into the brake pedal meeting.
6. Tighten the brake gentle change utilizing a wrench.
7. Join {the electrical} connector to the brake gentle change.
8. Depress the brake pedal to check the brake gentle change. The brake lights ought to illuminate when the brake pedal is depressed.
Checking the Brake Mild Change
In case you are having issues along with your brake lights, you’ll be able to test the brake gentle change to see whether it is defective. To test the brake gentle change, observe these steps:
1. Disconnect {the electrical} connector from the brake gentle change.
2. Use a multimeter to test for continuity between the 2 terminals of the brake gentle change.
3. If there isn’t a continuity, the brake gentle change is defective and must be changed.
Sustaining the Brake Controller
To make sure your brake controller capabilities correctly and safely, common upkeep is crucial. Listed below are some key steps to observe:
- Examine the Brake Controller: Often examine the brake controller for any indicators of harm, equivalent to unfastened connections or frayed wires.
- Clear the Brake Controller: Use a mushy material and delicate detergent to softly clear the brake controller to take away filth and mud.
- Test the Brake Pedal Sensitivity: The brake pedal sensitivity ought to be adjusted to fit your driving type and cargo weight. Confer with the brake controller handbook for steering.
- Check the Brake Controller: Conduct a take a look at drive with the trailer hooked up to confirm that the brake controller is working accurately.
- Confirm Trailer Brake Operation: Examine the trailer brakes to make sure they’re correctly activated when making use of the brake pedal.
- Lubricate the Brake Controller: If specified by the producer, lubricate the brake controller as per the supplied directions.
- Replace the Brake Controller Firmware: If firmware updates can be found, set up them to reinforce the brake controller’s performance and tackle any potential points.
- Examine Wiring and Connections: Completely look at the wiring and connections for any harm, corrosion, or unfastened terminals, particularly these uncovered to the weather.
- Use High quality Parts: Make sure that all elements used with the brake controller, equivalent to trailer wiring and connectors, are high-quality and appropriate along with your car and trailer.
- Confer with the Consumer Handbook: All the time seek the advice of the brake controller consumer handbook for particular upkeep directions and troubleshooting ideas.
| Extra Upkeep Suggestions |
|---|
| – Test the brake fluid stage recurrently and high it off if needed. |
| – Have your complete brake system inspected and serviced by a professional mechanic as really useful by the car producer. |
| – Retailer the brake controller in a dry and guarded location when not in use. |
2015 F150 How To Add Brake Controller
In case you’re towing a trailer along with your 2015 F150, you will want to put in a brake controller. It will assist you to manually management the trailer’s brakes, which is vital for security and stopping accidents.
This is a step-by-step information on how you can set up a brake controller in your 2015 F150:
- Collect your supplies. You may want a brake controller, wiring harness, and mounting bracket.
- Disconnect the adverse battery terminal.
- Find the brake pedal meeting. The brake controller will probably be mounted underneath the sprint, to the left of the brake pedal.
- Set up the mounting bracket. The bracket will probably be hooked up to the brake pedal meeting utilizing the supplied bolts.
- Join the wiring harness to the brake controller. The wiring harness will probably be plugged into the brake controller and the brake pedal meeting.
- Join the adverse battery terminal.
- Check the brake controller. Apply the brakes and ensure that the trailer’s brakes are additionally partaking.
Folks Additionally Ask About 2015 F150 How To Add Brake Controller
Can I set up a brake controller myself?
Sure, you’ll be able to set up a brake controller your self when you’ve got some fundamental automotive information and instruments.
The place is the most effective place to mount a brake controller?
The most effective place to mount a brake controller is underneath the sprint, to the left of the brake pedal. This gives you easy accessibility to the controller whereas driving.
What kind of brake controller do I would like for my 2015 F150?
You’ll need a brake controller that’s appropriate along with your 2015 F150’s towing capability. Seek the advice of your proprietor’s handbook or a professional technician to find out the proper brake controller in your car.
