The Stihl PolyCut 6.2 is a flexible reducing head designed to be used with Stihl trimmers. It includes a sturdy plastic building and a novel blade design that gives clear, exact cuts by means of grass and weeds. Eradicating the top is a straightforward course of that may be accomplished in just some steps. First, be sure that the trimmer is turned off and disconnected from the facility supply. Subsequent, find the 2 screws that safe the top to the trimmer shaft. Utilizing a screwdriver, loosen the screws and take away the top from the shaft. Lastly, take away the road from the top and discard the previous line.
To put in the brand new line, feed the tip of the road by means of the opening within the aspect of the top. Pull the road by means of till it reaches the specified size, then minimize the surplus line. Insert the road into the slot on the top and safe it with the screws. Lastly, reattach the top to the trimmer shaft and tighten the screws. Your Stihl PolyCut 6.2 is now prepared to make use of.
The Stihl PolyCut 6.2 is a sturdy and easy-to-use reducing head that gives glorious efficiency. By following these easy steps, you’ll be able to simply take away and change the top, making certain that your trimmer is all the time able to sort out any reducing activity.
Security Precautions Earlier than Eradicating the Head
Earlier than you start eradicating the top in your Stihl Polycut 6.2, it’s essential to take the required security precautions. These measures guarantee your security and forestall any potential accidents or injury to the gear.
Carrying Acceptable Security Gear
All the time put on acceptable security gear when working with energy instruments. This contains security glasses to guard your eyes from flying particles and a mud masks to forestall the inhalation of dangerous particles. Moreover, put on gloves to guard your arms from cuts and abrasions
Guaranteeing the Software is Unplugged
Earlier than trying to take away the top, be sure that the Stihl Polycut 6.2 is unplugged from any energy supply. This prevents the unintentional activation of the machine, which may result in accidents.
Safe Work Space
Select a secure and well-lit work space to carry out the top removing course of. Make sure that the world is free from tripping hazards and different potential obstacles.
Different Precautions
- Permit the Stihl Polycut 6.2 to chill down fully earlier than eradicating the top.
- Use correct instruments for the duty. Keep away from utilizing extreme power or the flawed instruments, as this might injury the gear.
- Should you encounter any difficulties or uncertainties, don’t hesitate to seek the advice of the consumer guide or search skilled help.
Finding the Launch Button for the Head
Step 1: Familiarize Your self with the Trimmer’s Head
The Stihl Polycut 6.2 trimmer head is a removable part that homes the reducing line. It’s sometimes situated on the finish of the trimmer’s shaft.
Step 2: Determine the Launch Button
The discharge button for the top is often situated on the aspect or high of the trimmer head. It’s usually a small, round button or lever with a notch or indentation. In some fashions, the discharge button could also be partially hidden beneath a protecting cowl. Seek the advice of your trimmer’s consumer guide or check with the diagram under for the particular location of the discharge button in your Stihl Polycut 6.2 trimmer.
Step 3: Press and Maintain the Launch Button
After you have situated the discharge button, press and maintain it firmly. Hold your thumb or finger on the button till the top loosens and comes free from the trimmer shaft. Chances are you’ll want to use some downward strain on the top whereas urgent the button to disengage it fully.
Step 4: Take away the Head
As soon as the discharge button is engaged, gently pull the top straight up and away from the trimmer shaft. Keep away from twisting or extreme power, as this will injury the trimmer or the top.
Urgent the Launch Button
Find the discharge button on the Stihl Polycut 6.2 trimmer head. It’s sometimes a small, spherical or oval button situated close to the middle of the top.
Pulling the Head Off
As soon as the discharge button is pressed, grasp the trimmer head firmly and pull it straight off the driveshaft. Don’t twist or flip the top, as this might injury the connection.
Eradicating the Line
With the top eliminated, now you can entry the trimmer line. To take away the previous line, merely pull it out of the road holes within the head. Remember to take away the entire previous line earlier than putting in new line.
| Step | Motion | Particulars |
|---|---|---|
| 1 | Find the discharge button | It’s often a small, spherical or oval button close to the middle of the top. |
| 2 | Press the discharge button | Maintain it down whereas concurrently pulling the top off the driveshaft. |
| 3 | Take away the road | Pull the previous line out of the road holes within the head. Take away the entire previous line earlier than putting in new line. |
As soon as the previous line is eliminated, you’ll be able to set up new line by following the directions in your Stihl Polycut 6.2 trimmer guide.
Inspecting the Head for Put on or Injury
Common inspection of the reducing head is essential to make sure optimum efficiency and prolong its lifespan. Here is an in depth information on the best way to examine the Polycut 6.2 reducing head for put on or injury:
- Visible Inspection: Rigorously look at the top for any seen indicators of wear and tear, akin to cracks, chips, or lacking enamel. If any injury is current, it is beneficial to interchange the top instantly.
- Verify for Unfastened Tooth: Maintain the reducing head firmly and gently shake it to verify for any unfastened or rattling enamel. Unfastened enamel can result in uneven reducing and must be changed or tightened.
- Examine the Washers: Take away the reducing head and verify the washers for any indicators of wear and tear or deformation. Substitute any broken washers to make sure correct alignment and forestall extreme vibration.
- Measure the Head Diameter: Utilizing a caliper or measuring tape, measure the diameter of the reducing head. The perfect diameter must be throughout the producer’s specs. A lowered diameter signifies put on that may have an effect on reducing effectivity and must be changed.
- Check the Reducing Efficiency: Set up the reducing head on the trimmer and carry out a check minimize in a delegated space. If the reducing is uneven or requires extreme power, it is possible that the top is worn or broken and must be changed.
Desk of Acceptable and Unacceptable Reducing Head Dimensions
| Dimension | Acceptable Vary | Unacceptable Vary |
|—|—|—|
| Diameter | 6.2 inches | Lower than 6.1 inches |
| Thickness | 0.1 inches | Lower than 0.09 inches |
Checking the Drive Shaft for Obstructions
If the Stihl Polycut 6.2 trimmer head will not be rotating appropriately, there could also be an obstruction within the drive shaft. To verify for obstructions:
-
Take away the trimmer head from the shaft.
-
Insert a small wire or rod into the drive shaft.
-
If the wire or rod encounters any resistance, there may be an obstruction.
-
Take away the obstruction utilizing a pair of pliers or a wire brush.
-
Clearing a Clogged Drive Shaft with Compressed Air:
- Use a compressor to direct a stream of compressed air into the drive shaft.
- Maintain the trimmer shaft upright to permit the air to blow out any particles or blockages.
- Repeat the method till the air flows freely by means of the shaft.
| Instruments Wanted: | Steps: |
|---|---|
| Wire or rod | Insert into drive shaft to verify for obstructions |
| Pliers or wire brush | Take away obstructions |
| Compressor with compressed air | Blow out particles and clear clogs |
Reinstalling the Head on the Drive Shaft
After cleansing or servicing, it is time to put the top again on the drive shaft:
-
Align the pin on the top with the notch on the drive shaft.
-
Push the top onto the shaft till it clicks into place.
6. Securing the Head with a Torx Screw
-
Find the Torx screw on the aspect of the top, subsequent to the drive shaft.
-
Tighten the screw snugly utilizing a Torx screwdriver. This helps stop the top from by accident detaching throughout use.
Observe: Don’t overtighten the screw, as this will injury the top.
5.
Verify the top for any wobble or looseness. It must be securely mounted on the drive shaft.
As soon as the top is securely reinstalled, your Stihl Polycut 6.2 is able to use once more.
Step 1: Verify for Attachment
Make sure that the top is securely hooked up to the trimmer shaft by holding the top in a single hand and the shaft within the different. Search for any gaps or indicators of motion between the top and the shaft.
Step 2: Loosen the Locking Nut
Utilizing the equipped Allen key, find the locking nut on the top. Grip the locking nut firmly and switch it counterclockwise to loosen it. Don’t take away the nut fully.
Step 3: Take away the Washer
As soon as the locking nut is unfastened, gently pull the washer behind it off the shaft. Be cautious to not lose the washer.
Step 4: Pull off the Head
Maintain the top firmly and pull it straight off the shaft. The pinnacle ought to slide off simply if it’s not seized or broken.
Step 5: Clear and Examine
Take this chance to wash any grime or particles from the top and the shaft. Examine each parts for any injury or put on.
Step 6: Reassemble Head
To reassemble the top, merely comply with the steps in reverse order. Slide the top again onto the shaft, making certain it’s absolutely seated. Substitute the washer and tighten the locking nut utilizing the Allen key.
Tightening the Head Utilizing the Allen Key
To make sure a safe match, use the equipped Allen key to tighten the locking nut. Grip the locking nut firmly and switch it clockwise, making use of average torque. Keep away from overtightening, as this will injury the top or the shaft.
Here is a desk summarizing the steps for tightening the top utilizing the Allen key:
| Step | Description |
|---|---|
| 1. | Find the locking nut on the top. |
| 2. | Grip the locking nut and switch it clockwise utilizing the Allen key. |
| 3. | Apply average torque to tighten the nut, however keep away from overtightening. |
Verifying Correct Head Alignment
Step 1: Verify the Head Bolt
Find the top bolt that secures the reducing head to the trimmer shaft. Guarantee it is tight and correctly aligned.
Step 2: Examine the Reducing Head
Study the reducing head for any injury, cracks, or unfastened parts. If any irregularities are current, change the top.
Step 3: Align the Head with the Shaft
With the top bolt unfastened, manually rotate the reducing head till it aligns completely with the trimmer shaft. Guarantee the top is perpendicular to the shaft and the drive system.
Step 4: Tighten the Head Bolt
Tighten the top bolt securely utilizing a wrench or socket. Keep away from overtightening, as this will injury the bolt or the trimmer.
Step 5: Check the Alignment
Begin the trimmer and interact the reducing head. Pay attention for any uncommon noises or vibrations. If current, it signifies improper head alignment. Repeat steps 3-4 till correct alignment is achieved.
Step 6: Extra Alignment Verify
To make sure optimum alignment, maintain the trimmer vertically and let the reducing head hold freely. If the top does not hold completely plumb, alter the top bolt till it does.
Step 7: Reassembly
Reassemble the trimmer housing and another eliminated parts. Tighten all screws and bolts securely.
Step 8: Closing Inspection
Conduct a closing inspection of the reducing head and trimmer earlier than utilizing it. Guarantee all elements are correctly aligned and securely mounted.
Troubleshooting Head Elimination Points
1. Examine the Retainer Nut
Verify if the retainer nut is correctly tightened. If unfastened, use a wrench to tighten it securely.
2. Clear the Threads
Take away any grime or particles that will have amassed on the threads of the top or retainer nut utilizing a brush or compressed air.
3. Apply Lubricant
Apply a small quantity of lubricant to the threads to scale back friction and support in removing.
4. Use a Correct Wrench
Guarantee you might be utilizing a wrench that matches the retainer nut correctly to keep away from stripping the top or nut.
5. Leverage and Drive
Apply even leverage and power to the wrench whereas turning it counterclockwise to loosen the retainer nut.
6. Examine the Head
As soon as the retainer nut is eliminated, examine the top for any injury or deformation that could be stopping its removing.
7. Alter the Throttle Place
Make sure the throttle is within the “STOP” place earlier than trying to take away the top.
8. Verify for Extra Fasteners
Some STIHL Polycut fashions might have extra fasteners securing the top. Find and take away these earlier than eradicating the top.
9. Use a Vise or Mallet
If the top remains to be caught, safe it in a vise and gently faucet it with a mallet to interrupt the bond that will have shaped between the top and shaft. Keep away from extreme power to forestall injury.
| Challenge | Resolution |
|---|---|
| Head will not budge | Apply warmth to the top with a warmth gun or blow dryer, then try to take away |
| Retainer nut is stripped | Substitute the retainer nut |
| Head is broken | Substitute the top |
Suggestions for Extending Head Lifespan
Observe these tricks to maximize the lifespan of your Stihl Polycut 6.2 trimmer head:
1. Use the proper trimmer line
The kind of trimmer line you utilize can have a big affect on the lifetime of your head. Use a line that’s suitable with the Stihl Polycut 6.2 and that’s designed for the kind of reducing you may be doing.
2. Wind the road correctly
When winding the road, ensure that to comply with the instructions within the Stihl Polycut 6.2 consumer guide. Improper winding could cause the road to interrupt prematurely.
3. Use the top on the right velocity
The Stihl Polycut 6.2 is designed for use at a particular velocity. Utilizing the top at too excessive or too low a velocity could cause the road to interrupt.
4. Keep away from hitting laborious objects
Hanging laborious objects with the Stihl Polycut 6.2 can injury the top and trigger the road to interrupt.
5. Clear the top usually
Particles can accumulate on the Stihl Polycut 6.2, which might trigger the road to turn into tangled and break. Clear the top usually to forestall this from taking place.
6. Retailer the top correctly
When storing the Stihl Polycut 6.2, ensure that to maintain it in a dry place. Moisture could cause the top to rust and deteriorate.
7. Substitute the top when obligatory
Even with correct care, the Stihl Polycut 6.2 will ultimately have to be changed. Substitute the top when the road can now not be wound correctly or when the top is broken.
| Beneficial Trimmer Line | Description |
|---|---|
| Stihl PolyCut 6.2 Trimmer Line | 0.080″ diameter, 150′ size |
| Stihl AutoCut 26-2 Trimmer Line | 0.095″ diameter, 165′ size |
Stihl Polycut 6.2 How To Take away The Head
The Stihl Polycut 6.2 is a robust and versatile trimmer that’s good for each residential and industrial use. It includes a 27.2 cc engine, a 17-inch reducing swath, and a wide range of reducing attachments. Probably the most essential issues to know concerning the Polycut 6.2 is the best way to take away the top. This can be a easy course of that may be accomplished in just some minutes.
To take away the top, first take away the spark plug wire and the gas line. Subsequent, unscrew the 2 bolts that maintain the top in place. As soon as the bolts are eliminated, you’ll be able to pull the top straight off of the shaft. Watch out to not lose the washer that’s situated between the top and the shaft.
If you find yourself reattaching the top, you’ll want to tighten the bolts securely. Over-tightening the bolts can injury the top or the shaft. As soon as the top is reattached, reconnect the spark plug wire and the gas line.
Folks Additionally Ask About Stihl Polycut 6.2 How To Take away The Head
What instruments do I must take away the top from a Stihl Polycut 6.2?
You have to a wrench or socket to take away the 2 bolts that maintain the top in place.
Is it tough to take away the top from a Stihl Polycut 6.2?
No, it’s a easy course of that may be accomplished in just some minutes.
Can I take away the top from a Stihl Polycut 6.2 with none instruments?
No, you have to a wrench or socket to take away the 2 bolts that maintain the top in place.
