Featured Picture: [Image of a Ring Video Doorbell being installed on a wall]
Putting in a Ring Video Doorbell is a comparatively easy course of that may be accomplished in only a few minutes. Nonetheless, there are some things you may must do earlier than you get began, equivalent to selecting a location for the doorbell and ensuring you could have the mandatory instruments. Upon getting all the things you want, you’ll be able to observe these easy steps to put in your Ring Video Doorbell:
First, you may want to decide on a location to your doorbell. One of the best place to put in a doorbell is close to your entrance door, the place will probably be simple for guests to see and use. As soon as you’ve got chosen a location, you may must drill a gap within the wall for the doorbell wires. As soon as the outlet is drilled, you’ll be able to insert the wires and safe the doorbell to the wall.
Subsequent, you may want to attach the doorbell to your private home’s Wi-Fi community. To do that, open the Ring app in your smartphone and observe the directions on the display. As soon as the doorbell is related to Wi-Fi, you can use the app to view stay video from the doorbell, obtain notifications when somebody rings the bell, and speak to guests by the doorbell’s built-in speaker.
Making ready Your Instruments and Supplies
Securing a Screwdriver
When choosing a screwdriver for Ring Video Doorbell set up, go for a Phillips head screwdriver with a magnetic tip. The magnetic tip will securely maintain the screws, stopping them from falling and getting misplaced. If you do not have a screwdriver with a magnetic tip, use a neodymium magnet to magnetize an strange screwdriver. Merely rub the magnet alongside the screwdriver tip a number of occasions to imbue it with magnetic properties.
Gathering Important Instruments and Supplies
Along with a magnetic-tip Phillips head screwdriver, you may want the next instruments and supplies for a easy set up:
| Merchandise | Goal |
|---|---|
| Drill | Creating holes for wire routing (if essential) |
| Drill bits | Matching the diameter of the wires |
| Degree | Guaranteeing the doorbell is put in straight |
| Wire strippers | Exposing wire ends for connections |
| Wire nuts | Connecting electrical wires |
| Electrical tape | Insulating wire connections |
| Ladder | Reaching excessive set up factors |
| Security glasses | Defending your eyes from particles throughout drilling |
| Ring Video DoorbellThe doorbell unit itself | |
| Mounting {hardware} | Screws and anchors for securing the doorbell |
| Set up handbook | Referencing step-by-step directions |
Selecting the Finest Set up Location
Deciding on the optimum set up spot to your Ring Video Doorbell is essential for its efficient functioning and your total dwelling safety. Listed here are key components to think about when selecting a location:
Visibility and Area of View
The placement ought to present a transparent and unobstructed view of your entryway and the encircling space. Make sure that there aren’t any obstacles equivalent to bushes, bushes, or fences blocking the digital camera’s line of sight. A wider subject of view means that you can monitor a bigger space and detect potential intruders or guests.
Energy Supply Availability
The Ring Video Doorbell requires a continuing energy supply to function. Decide a location that has entry to both an current doorbell wiring system or a close-by electrical outlet. If wiring the doorbell to your current doorbell system, be sure that it supplies ample voltage and amperage to energy the machine. Alternatively, you’ll be able to go for a battery-powered mannequin that doesn’t require wiring however might require common recharging.
Climate Circumstances
Contemplate the climate situations in your location. The Ring Video Doorbell is designed to face up to varied climate components, however extended publicity to excessive warmth, chilly, or moisture can have an effect on its efficiency. Select a protected space that minimizes direct daylight and isn’t vulnerable to heavy rain or snow.
Top and Angle
The peak and angle of the doorbell’s set up will decide the optimum subject of view. Ideally, the digital camera needs to be positioned at a top of 4-5 toes above the bottom, with a slight downward angle. This enables it to seize clear footage of tourists and any potential exercise at your step.
| Top | Angle | Goal |
| ———– | ———– | ———– |
| 4-5 toes | Slight downward angle | Clear footage of tourists |
| Increased | Straight angle | Broader subject of view |
| Decrease | Upward angle | Floor-level visibility |
Putting in the Mounting Bracket
Step 1: Select a Mounting Location
Choose a location for the mounting bracket that gives a transparent view of your entrance door and surrounding space. Contemplate the peak and angle at which you need the doorbell to be positioned for optimum visibility.
Step 2: Mark and Drill Holes
As soon as the situation is set, use a stage to make sure the mounting bracket will likely be put in straight. Mark the screw holes with a pencil or marker. Use a drill with the suitable sized drill bit to create pilot holes for the screws.
Step 3: Safe Mounting Bracket
Insert the screws into the pilot holes and tighten them securely utilizing a screwdriver. Make sure the mounting bracket is firmly connected to the wall or floor.
Further Ideas for Step 3:
- Use anchors when mounting on drywall or different mushy surfaces to offer extra help.
- For angled surfaces, use shims or wedges to stage the mounting bracket and stop the doorbell from tilting.
- Think about using a cordless drill or influence driver for simpler and extra environment friendly set up.
| Materials | Drill Bit Measurement |
|---|---|
| Wooden | 1/16″ |
| Brick | 3/16″ |
| Concrete | 1/4″ |
Connecting the Wires (Elective)
Connecting to current doorbell wires supplies steady energy to your Ring Video Doorbell, eliminating the necessity for battery modifications. Earlier than beginning, guarantee you could have the suitable instruments and supplies, together with a screwdriver, wire strippers, and electrical tape.
Establish the 2 doorbell wires extending out of your wall. Strip roughly 1/2 inch of insulation from the ends of each wires. Insert the stripped wires into the corresponding terminals on the again of the Ring Doorbell, making certain the proper polarity (crimson to R and black to C). Tighten the screws to safe the connections.
Further Issues:
In case your current doorbell system makes use of a transformer with a voltage output of 8-24 volts AC, you’ll be able to join on to the wires. Nonetheless, if the transformer voltage exceeds 24 volts AC or the system makes use of a chime not designed to be used with video doorbells, you will have to put in a suitable resistor or transformer to forestall injury to the Ring Doorbell.
When connecting to wires, guarantee a safe and secure connection to forestall points equivalent to intermittent energy or video loss. Use applicable electrical tape or different wire connectors to safe the connections and stop potential hazards.
| Device | Goal |
|---|---|
| Screwdriver | Tighten screw terminals |
| Wire Strippers | Take away insulation from wires |
| Electrical Tape | Safe and insulate connections |
Putting in the Doorbell Unit
1. Select a Mounting Location
Choose a spot close to your entrance door the place the doorbell could have a transparent view and may simply be reached for charging. Guarantee it is inside vary of your Wi-Fi sign.
2. Mark and Drill Pilot Holes
Mark the mounting gap places utilizing the offered template. Drill pilot holes at every mark, barely smaller than the screw diameter.
3. Set up the Mounting Bracket
Align the mounting bracket with the pilot holes and safe it with the included screws. Use a screwdriver or drill for a good match.
4. Join the Ring Doorbell
Run the wires from the doorbell to the mounting bracket, following the color-coded directions. Insert the doorbell into the bracket, making certain the wires are tucked inside.
5. Degree and Safe the Doorbell
| Description | Steps |
|---|---|
| Leveling: | Use a bubble stage to make sure the doorbell is straight each vertically and horizontally. If not, loosen the adjustment screw and modify till stage. |
| Securing: | Tighten the adjustment screw to safe the doorbell firmly. Confirm that it’s safe by gently pulling on it. |
| Hiding Wires: | Tuck the surplus wires into the devoted wire channel on the mounting bracket. If essential, use electrical tape to safe them. |
Configuring the Doorbell with the App
Now that the Ring Video Doorbell is bodily put in, the following step is to configure it utilizing the Ring app.
- Obtain the Ring App: Seek for “Ring” within the App Retailer (iOS) or Google Play (Android) and obtain the free app.
- Create an Account: Open the app and observe the prompts to create a brand new account along with your electronic mail handle and password.
- Add the Doorbell: Faucet the “Set Up a Machine” choice within the app and scan the QR code positioned on the again of the Doorbell. Alternatively, you’ll be able to manually enter the MAC ID.
- Configure WiFi: Join the Doorbell to your private home WiFi community by coming into the SSID and password. Make sure that the Doorbell is inside vary of your wi-fi router.
- Regulate Settings: Customise the Doorbell’s settings based on your preferences. You may modify movement sensitivity, evening imaginative and prescient, and different choices.
- Check the Doorbell: Press the Doorbell button and confirm that it rings in your cellular machine. Check the movement detection by waving your hand in entrance of the Doorbell. It is best to obtain a notification in your cellphone.
Setting Description Movement Sensitivity Adjusts the sensitivity of the movement sensor to scale back false alerts. Night time Imaginative and prescient Enhances visibility in low-light situations. Two-Means Speak Means that you can talk with guests by the Doorbell’s built-in microphone and speaker. Pre-Roll Buffer Exhibits a short video clip of what occurred earlier than the movement was detected.
Mounting the Doorbell on the Bracket
After securing the bracket to the wall, it is time to mount the doorbell. Comply with these steps rigorously to make sure a correct and safe set up.
Positioning the Doorbell
Maintain the doorbell in opposition to the bracket and place it the place you need it to be. Make sure the digital camera is dealing with the specified route and that the doorbell is stage.
Sliding the Doorbell into Place
As soon as the doorbell is positioned appropriately, gently slide it upwards into the bracket. There needs to be audible clicks because the doorbell snaps into place.
Tightening the Screw
Use a screwdriver to tighten the screw on the prime of the bracket. This screw will safe the doorbell firmly to the bracket and stop it from falling off.
Testing the Set up
As soon as the doorbell is put in, press the button to check if it is working correctly. The doorbell ought to chime and the digital camera ought to begin stay streaming.
Further Notes:
| Tip | Description |
|---|---|
| For those who encounter any issue positioning or sliding the doorbell into place, don’t power it. Verify for any obstructions or misalignments. | |
| The screw needs to be tightened securely however not excessively. Keep away from overtightening to forestall injury to the doorbell or bracket. | |
| After tightening the screw, tug gently on the doorbell to make sure it is securely connected to the bracket. |
Testing the Doorbell’s Performance
As soon as the doorbell is put in, it is essential to confirm its performance to make sure it operates as supposed. This is an in depth information for testing the doorbell:
1. Energy Up the Doorbell
Join the doorbell to an influence supply, both by connecting it to an current doorbell wiring or utilizing the offered battery. The standing mild on the doorbell ought to illuminate, indicating energy.
2. Obtain the Ring App
Set up the Ring app in your smartphone or pill. This app will can help you management and monitor the doorbell remotely.
3. Set Up the Machine
Open the Ring app and observe the on-screen directions to arrange the doorbell. This course of often entails connecting the machine to your Wi-Fi community.
4. Ring the Doorbell
As soon as the setup is full, press the button on the doorbell. It is best to hear a chime and obtain a notification in your cellphone.
5. Check Movement Detection
Stroll in entrance of the doorbell’s movement sensor to set off the movement detection characteristic. The doorbell ought to file a video clip and ship you a notification.
6. Regulate Movement Settings
If the movement detection is simply too delicate or not delicate sufficient, you’ll be able to modify the settings within the Ring app to optimize its efficiency.
7. Check Night time Imaginative and prescient
At evening or in low-light situations, the doorbell’s evening imaginative and prescient characteristic ought to activate. Stroll in entrance of the doorbell at nighttime to look at the picture high quality.
8. Check Stay View and Two-Means Audio
The Ring doorbell means that you can view stay footage from the digital camera remotely. Faucet the Stay View button within the Ring app to entry this characteristic. You may as well use the built-in microphone and speaker to speak with guests.
| Check | Motion |
|---|---|
| Energy Up | Hook up with energy and test standing mild |
| App Setup | Set up Ring app and observe setup directions |
| Ring Bell | Press doorbell button to test chime and notification |
| Movement Detection | Set off movement sensor and confirm recording |
| Movement Settings | Regulate sensitivity and detection zones within the app |
| Night time Imaginative and prescient | Check picture high quality in low-light situations |
| Stay View and Two-Means Audio | Entry stay footage and talk with guests |
Troubleshooting Frequent Set up Points
Encountering difficulties along with your Ring Video Doorbell set up? Listed here are some widespread points and options that can assist you troubleshoot:
1. No Energy to the Machine
Make sure the machine is securely related to an influence supply. Attempt utilizing a special outlet or energy adapter if essential.
2. Weak or No Wi-Fi Sign
Verify the Wi-Fi sign power within the space the place the doorbell is put in. Transfer the machine nearer to the router or think about using a Wi-Fi extender.
3. Incorrect Wiring
Confirm that the doorbell wires are correctly related to the proper terminals on each the machine and the chime equipment.
4. Defective Mount
Examine the doorbell mount for any injury or unfastened connections. Reinstall the machine securely utilizing the offered screws.
5. Incorrect Battery Set up
Make sure the battery is inserted appropriately and absolutely charged. Check with the person handbook for particular directions.
6. Damaged or Broken Wires
Examine the wires for any cuts or breaks. If essential, change the broken wires or contact Ring help.
7. Intermittent Connection
Restart the machine by urgent and holding the setup button for 15 seconds. This can reset the Wi-Fi connection.
8. Audio Points
Confirm that the speaker quantity is ready correctly within the Ring app. Verify for any obstructions close to the microphone or speaker.
9. Troubleshooting Frequent Set up Points
| Situation | Answer |
|---|---|
| Chime doesn’t ring | Confirm appropriate chime wiring or contact Ring help |
| Video footage is blurry or distorted | Regulate digital camera settings within the Ring app or take away any obstructions from the digital camera’s view |
| Movement detection doesn’t work | Verify movement sensitivity settings within the app or modify the machine’s place |
| Stay view is delayed or freezing | Enhance Wi-Fi sign power or modify video high quality settings |
| Notifications are usually not being obtained | Guarantee push notifications are enabled within the app and test your cellphone’s notification settings |
| Doorbell is offline | Verify energy provide, Wi-Fi connection, or contact Ring help |
Having fun with the Advantages of Your New Doorbell
Your new Ring Video Doorbell is put in and able to use. Now it is time to benefit from the many advantages it has to supply. Listed here are only a few of the issues you are able to do along with your new doorbell:
By no means miss a customer once more.
Along with your Ring Doorbell, you’ll be able to see and converse to guests from anyplace with an web connection. Whether or not you are at dwelling, at work, or on trip, you may all the time know who’s at your door.
Deter crime.
The Ring Doorbell’s movement detection and two-way speak options may help deter crime. Potential burglars will likely be much less more likely to goal a house with a visual doorbell digital camera, they usually’ll be even much less more likely to stick round for those who begin speaking to them by the doorbell.
Regulate your private home.
The Ring Doorbell’s stay view characteristic means that you can test in on your private home from anyplace, anytime. You need to use the stay view to see what’s taking place in your yard, in your porch, and even inside your private home.
Obtain alerts when movement is detected.
The Ring Doorbell will ship you an alert at any time when it detects movement. This fashion, you’ll be able to all the time concentrate on what is going on on round your private home, even for those who’re not there.
Document and save movies of tourists.
The Ring Doorbell can file and save movies of tourists. This fashion, you’ll be able to all the time have a file of who was at your door, even for those who missed the alert.
Share movies with others.
You may share movies of tourists with others by the Ring app. It is a nice option to hold your loved ones and buddies up to date on what is going on on at your private home.
Entry your doorbell from a number of gadgets.
You may entry your Ring Doorbell from a number of gadgets, together with your smartphone, pill, and laptop. This fashion, you’ll be able to all the time keep related to your private home, regardless of the place you might be.
Customise your doorbell settings.
You may customise your Ring Doorbell settings to suit your wants. You may select the movement detection sensitivity, the alert settings, and the recording settings.
Get help from Ring.
Ring affords a wide range of help choices, together with on-line assist, cellphone help, and stay chat. When you’ve got any questions or issues along with your Ring Doorbell, you’ll be able to contact Ring for assist.
Learn how to Set up a Ring Video Doorbell
Putting in a Ring Video Doorbell is a comparatively easy course of that may be accomplished in about quarter-hour. The next directions will information you thru the method step-by-step.
-
Select a mounting location
Step one is to decide on a mounting location to your Ring Video Doorbell. The perfect location is close to your entrance door, the place it should have a transparent view of anybody approaching. Be certain the situation is out of direct daylight and away from any sources of warmth or chilly.
-
Mark the mounting holes
Upon getting chosen a mounting location, use the offered template to mark the mounting holes. Maintain the template in opposition to the wall and use a pencil to mark the 2 holes.
-
Drill the mounting holes
Utilizing a drill, drill two holes on the marked places. The holes needs to be about 3/16 inches deep.
-
Insert the anchors
Insert the offered anchors into the drilled holes.
-
Screw within the mounting bracket
Screw the offered mounting bracket into the anchors.
-
Connect the Ring Video Doorbell
Slide the Ring Video Doorbell onto the mounting bracket and safe it with the offered screws.
-
Degree the Ring Video Doorbell
Use a stage to ensure the Ring Video Doorbell is stage. Loosen the mounting screws if essential to stage the Ring Video Doorbell.
-
Tighten the mounting screws
Tighten the mounting screws to safe the Ring Video Doorbell.
-
Join the wires
In case you are connecting your Ring Video Doorbell to an current doorbell system, observe the directions within the Ring app to attach the wires.
-
Check the Ring Video Doorbell
As soon as the Ring Video Doorbell is put in, take a look at it to ensure it’s working correctly.
Individuals Additionally Ask
How do I join my Ring Video Doorbell to Wi-Fi?
To attach your Ring Video Doorbell to Wi-Fi, observe these steps:
- Open the Ring app in your cellular machine.
- Faucet the “Menu” icon within the top-left nook of the display.
- Faucet “Units.”
- Faucet the Ring Video Doorbell that you simply wish to connect with Wi-Fi.
- Faucet “Wi-Fi Settings.”
- Enter the password to your Wi-Fi community.
- Faucet “Join.”
How do I alter the batteries in my Ring Video Doorbell?
To vary the batteries in your Ring Video Doorbell, observe these steps:
- Take away the faceplate of the Ring Video Doorbell.
- Find the battery compartment.
- Take away previous batteries.
- Set up new batteries.
- Reattach the faceplate.
- Press and maintain the orange button on the again of the Ring Video Doorbell for five seconds.
- Launch the button.
- Look forward to the Ring Video Doorbell to reboot.
How do I reset my Ring Video Doorbell?
To reset your Ring Video Doorbell, observe these steps:
