Changing the battery in a 2014 Chevy Malibu is a comparatively easy activity that may be accomplished in about half-hour. Nonetheless, you will need to comply with the correct steps to keep away from any harm to the automobile or its electrical system. This information will give you step-by-step directions on how one can exchange the battery in your 2014 Chevy Malibu, guaranteeing that the job is completed safely and effectively.
Earlier than you start, you’ll need to collect a couple of instruments. These embody a 10mm socket and wrench, a flathead screwdriver, and a brand new battery. After you have all your instruments, you’ll be able to start the alternative course of. First, open the hood of the automobile and find the battery. It will likely be positioned on the passenger facet of the engine compartment. Disconnect the unfavorable terminal of the battery utilizing the 10mm socket and wrench. Then, disconnect the optimistic terminal. As soon as each terminals are disconnected, you’ll be able to take away the battery from the automobile. Fastidiously raise the battery out of the compartment, being cautious to not drop it.
Subsequent, you’ll need to put in the brand new battery. Place the brand new battery within the compartment and join the optimistic terminal first. Then, join the unfavorable terminal. Tighten each terminals utilizing the 10mm socket and wrench. Lastly, shut the hood of the automobile and begin the engine. Examine the battery gauge to make it possible for the brand new battery is charging correctly. If every thing is working appropriately, you could have efficiently changed the battery in your 2014 Chevy Malibu.
Supplies and Instruments Required
Earlier than embarking on the battery alternative journey, it is essential to collect the required instruments and supplies. A well-prepared device equipment will guarantee a clean and environment friendly course of.
Supplies:
- Alternative battery: Guarantee you choose a suitable battery that meets the specs of your 2014 Chevy Malibu.
- Anti-corrosion spray: This spray helps defend the battery terminals from oxidation and corrosion, enhancing their longevity.
- New battery terminal bolts: Change worn or rusted bolts to supply a safe connection.
Instruments:
| Instrument | Use | |
|---|---|---|
| 10mm socket wrench | Eradicating and putting in battery terminal bolts | |
| 10mm box-end wrench | Holding battery terminal nuts in place | |
| Battery terminal cleaner | Cleansing corrosion from battery terminals | |
| Gloves | Defending fingers from battery acid |
| Security Precautions |
|---|
| – Disconnect the battery – Put on gloves and eye safety – Don’t smoke or create sparks – Place the battery upright |
Open the Hood and Find the Battery
To entry the battery in your 2014 Chevrolet Malibu, begin by opening the hood. Pull the hood launch lever positioned on the motive force’s facet footwell and raise the hood. Safe the hood within the open place utilizing the assist rod.
Security Precautions
Earlier than dealing with the battery, there are a couple of security precautions to contemplate:
- Put on security glasses and gloves.
- Don’t contact the battery terminals together with your naked fingers.
- Preserve any flames or sparks away from the battery.
Finding the Battery
The battery is positioned within the trunk of the Malibu. To entry it, comply with these steps:
1. Press the trunk launch button on the important thing fob or dashboard.
2. Raise the trunk lid and find the battery on the left rear nook of the trunk.
The battery is secured in place with a battery hold-down bracket. To take away it, you’ll need to loosen the nut holding the bracket in place. Use a wrench or socket to barely loosen the nut, however don’t take away it fully.
Disconnect the Unfavourable Cable
The unfavorable cable is the black cable related to the unfavorable terminal of the battery. You will want a wrench or socket to loosen the nut that holds the cable in place. As soon as the nut is free, you’ll be able to pull the cable off of the terminal.
Watch out to not contact the optimistic terminal of the battery whilst you’re disconnecting the unfavorable cable. If you happen to do, you would create a brief circuit that would harm your automotive or injure your self.
As soon as the unfavorable cable is disconnected, you’ll be able to proceed to take away the outdated battery and set up the brand new battery. You’ll want to join the brand new battery within the appropriate order: optimistic terminal first, then unfavorable terminal.
Extra Info
Listed here are some further ideas for disconnecting the unfavorable cable:
- Put on gloves and security glasses to guard your self from battery acid.
- Use a wrench or socket that’s the appropriate measurement for the nut that holds the cable in place.
- Watch out to not overtighten the nut once you reconnect the cable.
| Step | Description |
|---|---|
| 1 | Collect your instruments and security gear. |
| 2 | Find the unfavorable terminal of the battery. |
| 3 | Loosen the nut that holds the unfavorable cable in place. |
| 4 | Pull the unfavorable cable off of the terminal. |
| 5 | Watch out to not contact the optimistic terminal of the battery. |
Disconnect the Optimistic Cable
To start, you may have to disconnect the optimistic cable from the battery. That is the purple cable that runs from the optimistic terminal of the battery to the starter. Utilizing a wrench, fastidiously loosen the nut that holds the cable in place. As soon as the nut is free, you’ll be able to pull the cable off of the terminal. Watch out to not contact some other metallic objects with the cable, as this might trigger a spark.
Word: It is vital to disconnect the optimistic cable first, as this may forestall any electrical shorts from occurring. If you happen to disconnect the unfavorable cable first, you would quick the battery if the wrench touches any metallic objects.
3. Take away the Battery Maintain-Down
As soon as the optimistic cable is disconnected, you’ll be able to take away the battery hold-down. That is normally a metallic bracket that’s bolted to the battery tray. Utilizing a wrench, loosen the bolts that maintain the bracket in place. As soon as the bolts are free, you’ll be able to take away the bracket from the battery tray.
4. Raise the Battery Out of the Tray
With the battery hold-down eliminated, now you can raise the battery out of the tray. Watch out to not drop the battery, as it’s heavy. If the battery is caught, you should use a pry bar to softly pry it free.
5. Clear the Battery Terminals
As soon as the battery is out of the tray, it’s best to clear the battery terminals. Over time, the terminals can turn into corroded, which might forestall the battery from making a superb connection. To wash the terminals, use a wire brush to clean away any corrosion. You may as well use a battery terminal cleaner to assist take away any cussed corrosion.
As soon as the terminals are clear, you’ll be able to reconnect the battery. Begin by connecting the optimistic cable to the optimistic terminal. Tighten the nut that holds the cable in place. Then, join the unfavorable cable to the unfavorable terminal. Tighten the nut that holds the cable in place.
Lastly, re-install the battery hold-down. Tighten the bolts that maintain the bracket in place. Your battery is now changed.
Take away the Previous Battery
1. Find the battery: It is normally located beneath the hood, on the passenger facet. Search for the big, rectangular case with two terminals (plus and minus).
2. Disconnect the unfavorable terminal: Utilizing a wrench, loosen the nut on the unfavorable terminal (marked with a minus signal). Fastidiously raise the terminal away from the battery submit. Word: At all times disconnect the unfavorable terminal first to stop quick circuits.
3. Disconnect the optimistic terminal: Repeat the method for the optimistic terminal (marked with a plus signal).
4. Take away the battery hold-down bracket: Find the bracket holding the battery in place. It usually has a bolt or latch that must be loosened or unhooked.
5. Raise out the outdated battery: Fastidiously grasp the battery handles or sides and gently raise it straight up and out of the compartment. Be aware of the load and don’t tilt the battery sideways.
6. Examine the battery compartment: As soon as the outdated battery is eliminated, take a second to examine the battery compartment for any corrosion or harm. Clear any terminals or surfaces that seem corroded utilizing a wire brush or battery terminal cleaner. If there’s vital harm, it is beneficial to have it professionally inspected earlier than putting in the brand new battery.
| Battery Terminal | Image | Coloration |
|---|---|---|
| Unfavourable | – | Black |
| Optimistic | + | Pink |
Clear the Battery Terminals
Step 7: Use a Battery Terminal Cleaner and Brush
To make sure that the battery terminals are completely cleaned, apply a battery terminal cleaner to them. The cleaner will dissolve any corrosion or buildup on the terminals. Use a soft-bristled brush to softly scrub the terminals, eradicating any remaining grime or particles.
Alternatively, you’ll be able to create your individual battery terminal cleaner by mixing baking soda with water. Baking soda is a gentle abrasive that can assist to take away corrosion with out damaging the terminals. Apply the baking soda combination to the terminals and use a brush to clean them clear.
After cleansing the terminals, rinse them completely with water to take away any residual cleaner or baking soda combination. As soon as the terminals are clear and dry, you’ll be able to reconnect the battery cables.
| Supplies Wanted: |
|---|
| Battery terminal cleaner |
| Comfortable-bristled brush |
| (Elective) Baking soda |
| Water |
Set up the New Battery
Now that you’ve got the outdated battery eliminated, it is time to set up the brand new one. Listed here are the detailed steps:
1. Examine the New Battery
Earlier than putting in the brand new battery, examine it for any harm or defects. Be certain that the terminals are clear and freed from corrosion.
2. Place the Battery
Fastidiously raise the brand new battery into place. Align it with the terminals within the battery tray.
3. Join the Optimistic Terminal
Utilizing the wrench or socket, tighten the nut on the optimistic terminal (normally purple). Be certain that it is safe however do not overtighten it.
4. Join the Unfavourable Terminal
Repeat the identical course of for the unfavorable terminal (normally black).
5. Examine the Connections
After connecting each terminals, examine them to make sure they’re tight and safe.
6. Clear the Terminals
If crucial, use a battery terminal cleaner to wash the terminals and take away any corrosion.
7. Set up the Battery Cowl
Change the battery cowl if there’s one.
8. Reset the Radio and Clock
Relying in your automobile’s settings, you might have to reset the radio and clock after changing the battery. Check with your Malibu’s proprietor’s guide for particular directions.
| Step | Motion |
|---|---|
| 1 | Examine the brand new battery for harm or defects. |
| 2 | Place the brand new battery within the battery tray. |
| 3 | Join the optimistic terminal first, tightening the nut securely. |
| 4 | Join the unfavorable terminal, additionally tightening the nut securely. |
| 5 | Examine the connections to make sure they’re tight and safe. |
| 6 | Clear the terminals if crucial. |
| 7 | Set up the battery cowl, if relevant. |
| 8 | Reset the radio and clock settings if required. |
Reconnect the Cables
9. **Reconnecting the Optimistic Cable**: As soon as the unfavorable cable is related, it is time to reconnect the optimistic cable. Find the purple or optimistic terminal in your battery and clear it as effectively. Align the optimistic terminal with the red-colored cable and place the bolt over it. Tighten the bolt securely utilizing your wrench or socket wrench.
After tightening the optimistic cable, double-check each connections to make sure they’re cosy and safe. Unfastened connections can result in beginning issues or electrical points down the street.
To summarize, the steps for reconnecting the cables are as follows:
| Step | Motion |
|---|---|
| 1 | Join the unfavorable cable to the unfavorable terminal. |
| 2 | Clear the optimistic terminal and optimistic cable. |
| 3 | Join the optimistic cable to the optimistic terminal. |
| 4 | Tighten the bolt on the optimistic cable. |
| 5 | Double-check each connections to make sure they’re safe. |
Take a look at the Battery and Engine
Earlier than you resolve to switch the battery, it is a good suggestion to check it to make it possible for it is truly the issue. Here is how one can do it:
- Park the automotive and switch off the engine.
- Open the hood.
- Find the battery. It is normally positioned within the entrance of the engine compartment.
- Clear the battery terminals with a wire brush or a bit of sandpaper.
- Join a multimeter to the battery terminals. The purple lead needs to be related to the optimistic terminal, and the black lead needs to be related to the unfavorable terminal.
- Begin the engine.
- The multimeter ought to learn between 13.5 and 14.5 volts.
- If the multimeter reads beneath 12 volts, the battery might must be changed.
Examine the Battery Cables and Terminals
If the battery take a look at comes again good, the following factor to do is to examine the battery cables and terminals. Search for any indicators of corrosion, free connections, or harm. If you happen to discover any issues, clear the terminals and tighten the connections. If the cables are broken, they are going to must be changed.
Change the Battery
If you happen to’ve examined the battery and the cables and terminals are good, then it is time to exchange the battery. Here is how one can do it:
- Disconnect the unfavorable battery terminal.
- Disconnect the optimistic battery terminal.
- Take away the outdated battery.
- Place the brand new battery within the battery tray.
- Join the optimistic battery terminal.
- Join the unfavorable battery terminal.
- Tighten the battery terminals.
- Begin the engine and examine the battery voltage. It needs to be between 13.5 and 14.5 volts.
How you can Change a Battery in a 2014 Chevy Malibu
Changing a battery in a 2014 Chevy Malibu is a comparatively easy course of that may be accomplished in a matter of minutes. By following these steps, it can save you your self the time and expense of hiring a mechanic.
- Flip off the engine and park the automotive in a protected location.
- Open the hood and find the battery. It will likely be positioned on the passenger facet of the engine compartment.
- Disconnect the unfavorable battery terminal by loosening the nut with a wrench. Watch out to not contact the optimistic terminal with the wrench.
- Disconnect the optimistic battery terminal by loosening the nut with a wrench.
- Raise the battery out of the battery tray.
- Place the brand new battery within the battery tray and safe it with the hold-down bracket.
- Join the optimistic battery terminal by tightening the nut with a wrench.
- Join the unfavorable battery terminal by tightening the nut with a wrench.
- Shut the hood and begin the engine.
Folks Additionally Ask
The place is the battery positioned in a 2014 Chevy Malibu?
The battery is positioned on the passenger facet of the engine compartment.
Can I exchange the battery in my 2014 Chevy Malibu myself?
Sure, you’ll be able to exchange the battery in your 2014 Chevy Malibu your self by following the steps outlined above.
How a lot does it price to switch a battery in a 2014 Chevy Malibu?
The price of changing a battery in a 2014 Chevy Malibu will differ relying on the kind of battery you select and the situation the place you could have it changed. Nonetheless, you’ll be able to count on to pay between $100 and $200 for the battery and labor.
How lengthy does it take to switch a battery in a 2014 Chevy Malibu?
Changing a battery in a 2014 Chevy Malibu ought to take not more than half-hour.
What instruments do I want to switch a battery in a 2014 Chevy Malibu?
You will have the next instruments to switch a battery in a 2014 Chevy Malibu:
- Wrench
- Socket wrench
- New battery
