Within the realm of vaping, the NOVVO 2X Pod system stands as a testomony to innovation and comfort. Its revolutionary design and user-friendly interface have made it a favourite amongst vapers of all expertise ranges. Nevertheless, one key facet of utilizing the NOVVO 2X Pod is mastering the artwork of filling it appropriately. Whether or not you are a seasoned vaper or simply beginning your vaping journey, this complete information will offer you the important steps and suggestions to make sure a seamless and satisfying vaping expertise together with your NOVVO 2X Pod.
Earlier than embarking on the filling course of, it’s essential to collect the mandatory supplies. You have to a NOVVO 2X Pod, your most popular e-liquid, and a clear material or paper towel. With these things at your disposal, you possibly can proceed with filling your NOVVO 2X Pod. To start, gently take away the mouthpiece from the pod by pulling it upwards. As soon as the mouthpiece is indifferent, you will notice a small gap on the backside of the pod. That is the place you’ll insert the e-liquid. Utilizing the dropper supplied together with your e-liquid bottle, fastidiously fill the pod till it reaches the indicated fill line. Keep away from overfilling the pod, as this could result in leaking and different points.
After filling the pod, fastidiously reattach the mouthpiece by urgent it firmly into place. Make sure that it’s securely linked to forestall any e-liquid leakage. As soon as the mouthpiece is connected, wipe away any extra e-liquid which will have spilled onto the pod or your fingers. Lastly, insert the crammed pod into your NOVVO 2X gadget and revel in your vaping expertise. Bear in mind to prime the coil by taking a couple of quick puffs with out inhaling earlier than vaping recurrently. This step helps to saturate the coil adequately and prevents dry hits.
Inserting the Pod into the Gadget
Putting in the pod into your Novvo 2x gadget is a fast and straightforward course of. Observe these detailed steps to make sure a correct match:
-
Find the Pod Bay: Flip your Novvo 2x the wrong way up and open the magnetically secured pod bay located on the underside of the gadget.
-
Orient the Pod Appropriately: Take a contemporary pod and guarantee its notch is aligned with the corresponding notch contained in the pod bay. The pod ought to match snugly into place.
- Desk of Pod Orientations:
Pod Sort Notch Alignment Single-use Pod Notch dealing with the entrance of the gadget Refillable Pod Notch dealing with the again of the gadget -
Safe the Pod Bay: As soon as the pod is inserted, shut the pod bay magnetically. Confirm that the pod is firmly secured by gently urgent on it. A refined "click on" ought to point out a correct match.
-
Prime the Gadget: Take a couple of light puffs on the mouthpiece to activate the pod. This can permit the e-liquid to saturate the coil, making certain optimum vapor manufacturing and taste supply.
Filling the Chamber
The Novvo 2x Pod is a revolutionary new pod system that makes filling your favourite e-liquid a breeze. With its progressive design, the Novvo 2x Pod encompasses a top-fill system that eliminates the necessity for messy and time-consuming bottom-filling.
To fill the Novvo 2x Pod, merely comply with these straightforward steps:
1. Take away the Pod
To take away the pod, gently pull it straight up from the gadget.
2. Find the Fill Port
The fill port is situated on the highest of the pod. It’s coated by a small rubber stopper.
3. Fill the Chamber
Use the included e-liquid bottle to fill the chamber. The chamber holds as much as 2ml of e-liquid.
**Ideas for Filling the Chamber:**
- Use a needle-tip bottle or syringe to fill the chamber. This can assist to forestall spilling.
- Fill the chamber slowly to keep away from overflowing.
- Go away a small air bubble on the prime of the chamber.
| Step No. | Description |
|---|---|
| 1 | Find the Fill Port |
| 2 | Take away the rubber stopper |
| 3 | Fill the chamber to the highest |
| 4 | Change the rubber stopper |
Measuring the Right Dosage
To fill your Novvo 2x pod with the right dosage of treatment, comply with these steps:
1. Collect Your Supplies:
You have to your Novvo 2x pod, treatment vial, and diluent (if required).
2. Put together the Treatment:
In case your treatment requires dilution, combine it in line with the producer’s directions. Draw the diluted treatment right into a 1mL syringe.
3. Take away the Pod Cap:
Take away the cap from the Novvo 2x pod by gently pulling it straight up.
4. Fill the Pod:
Maintain the pod upright and insert the syringe needle into the fill port on prime. Slowly depress the syringe plunger to fill the pod. Make sure that there are not any air bubbles current throughout the pod. If an air bubble seems, gently faucet the pod to dislodge the bubble and proceed filling. As soon as the specified dosage is reached, slowly withdraw the syringe needle.
5. Change the Pod Cap:
Place the cap securely again on prime of the pod by urgent it down till it clicks into place.
Avoiding Overfilling
Overfilling your NOVVO 2X pod can result in leaking and different points. To keep away from overfilling, comply with the following tips:
1. Fill the Pod Slowly
Take your time when filling the pod. This can make it easier to keep away from spilling e-liquid over the edges.
2. Use the Fill Line
The NOVVO 2X pod has a fill line marked on the aspect. Use this line to information you when filling the pod. Cease filling as soon as the e-liquid reaches the fill line.
3. Examine for Air Bubbles
As soon as you’ve got crammed the pod, faucet it gently to launch any air bubbles. Air bubbles may cause the pod to leak.
4. Wipe Away Extra E-Liquid
In the event you spill any e-liquid on the pod or gadget, wipe it away with a clear material. This can assist stop leaking.
5. Filling Chart
Under is a chart that gives extra particulars on the filling course of for the NOVVO 2X pod:
Closing the Lid
As soon as the pod is crammed, shut the lid by lining up the arrows on the pod and the gadget and urgent the lid down till it clicks into place. Make certain the lid is securely fixed to forestall any leaking or harm to the gadget.
Listed below are some extra suggestions for closing the lid:
1. Examine the alignment: Earlier than closing the lid, be sure that the fill port is dealing with the right means. If it isn’t aligned correctly, it could possibly trigger leaks or harm to the gadget.
2. Press firmly: When closing the lid, apply agency and even strain to make sure a safe match. A free lid may cause the pod to leak or malfunction.
3. Keep away from overtightening: Whereas it is necessary to shut the lid securely, keep away from overtightening. Doing so can harm the pod or the gadget.
4. Examine for leaks: After closing the lid, examine the pod and gadget for any indicators of leaking. If there are any leaks, clear the world totally and take a look at closing the lid once more.
5. Seal the pod correctly: If the lid is just not closed correctly, it could possibly permit air to enter the pod and oxidize the e-liquid. This will have an effect on the flavour and high quality of the vape.
6. Clear the lid: If the lid turns into soiled or sticky, clear it with a cotton swab dipped in rubbing alcohol. This can assist stop any contamination.
7. Troubleshooting: In the event you’re having bother closing the lid, examine the next:
| Challenge | Answer |
|---|---|
| Lid not aligning | Examine the alignment of the pod and gadget. |
| Lid not closing securely | Press the lid extra firmly. |
| Lid overtightened | Loosen the lid and take a look at closing it once more. |
| Pod leaking | Examine for alignment, clear the world, and take a look at closing the lid once more. |
| Pod not vaping correctly | Make sure the lid is closed correctly and examine for leaks. |
Tips on how to Fill Novvo 2x Pod
Filling the Novvo 2x pod is a straightforward course of that may be accomplished in a couple of straightforward steps:
- Take away the pod from the gadget.
- Find the fill port on the aspect of the pod.
- Insert the tip of your e-liquid bottle into the fill port.
- Squeeze a small quantity of e-liquid into the pod.
- Repeat steps 3 and 4 till the pod is full.
- Reinsert the pod into the gadget.
Ideas:
- Don’t overfill the pod, as this could trigger e-liquid to leak.
- Watch out to not get any e-liquid within the air gap.
- If you’re new to vaping, it is strongly recommended to start out with a low nicotine power e-liquid.
Individuals Additionally Ask
How usually ought to I refill my Novvo 2x pod?
The frequency with which you might want to refill your Novvo 2x pod will rely upon how usually you vape. Nevertheless, as a common rule of thumb, it is best to refill your pod when the e-liquid degree is low.
What sort of e-liquid can I take advantage of with my Novvo 2x pod?
You should utilize any sort of e-liquid together with your Novvo 2x pod. Nevertheless, you will need to notice that some e-liquids could also be too thick for the pod to vaporize correctly. If you’re uncertain whether or not or not an e-liquid is suitable together with your Novvo 2x pod, it’s at all times greatest to seek the advice of with the producer.
How do I clear my Novvo 2x pod?
To wash your Novvo 2x pod, merely take away it from the gadget and wipe it down with a clear, dry material. You may as well use a cotton swab to wash the within of the pod.
