The right way to Change the PUR Water Filter
Altering the water filter in your PUR water filtration system is a vital a part of making certain that you simply and your loved ones have entry to scrub, wholesome ingesting water. A clear water filter will take away impurities out of your water, resembling chlorine, lead, and cysts. It would additionally enhance the style and scent of your water.
Supplies You will Want
- New PUR water filter
- Adjustable wrench
- Clear material
Step-by-Step Directions
- Find the water filter. The water filter is usually positioned underneath the sink, subsequent to the water provide line. Will probably be a cylindrical-shaped canister with a blue cap.
- Flip off the water provide. Earlier than you start engaged on the water filter, you will need to flip off the water provide to your sink. It will stop water from leaking out if you take away the filter.
- Unscrew the outdated filter. Use an adjustable wrench to loosen the outdated filter. Watch out to not overtighten the wrench, as this might injury the filter or the housing.
- Take away the outdated filter. As soon as the filter is loosened, you possibly can pull it straight all the way down to take away it from the housing.
- Insert the brand new filter. Take the brand new filter and insert it into the housing. Hand-tighten the filter till it’s cosy. Don’t overtighten the filter, as this might injury the filter or the housing.
- Activate the water provide. As soon as the brand new filter is in place, you possibly can activate the water provide to your sink. Enable the water to run for a couple of minutes to flush out any air bubbles from the system.
- Examine for leaks. As soon as the water has been operating for a couple of minutes, examine for any leaks across the filter. If you happen to see any leaks, tighten the filter till the leak stops.
Suggestions
- Change your PUR water filter each 6 months, or extra usually you probably have onerous water.
- If you happen to discover a lower in water stress or a change within the style or scent of your water, it might be time to alter your filter.
- In case you have any problem altering your PUR water filter, please seek the advice of the producer’s directions or contact a professional plumber.
Finding the Water Filter
Discovering the water filter in your PUR water filtration system is an important step earlier than changing it. Here is a step-by-step information that can assist you find the filter effortlessly:
Establish the Filter Housing
Begin by figuring out the placement of the filter housing. It is usually a cylindrical or rectangular element related to the underside of the sink or countertop. The housing could also be hid underneath an ornamental cowl or accessible via a small entry panel.
Find the Filter Kind
As soon as you have positioned the filter housing, decide the kind of filter you’ve got. PUR affords varied filter fashions, every with a singular design. Confer with your consumer handbook or examine the filter housing itself for any markings that point out the filter sort.
Examine the Filter Housing
Rigorously study the filter housing for any seen indicators that can aid you find the filter. Some fashions could have a small entry door or a launch button that lets you detach the filter simply. If you happen to do not see any apparent indicators, seek the advice of your consumer handbook for particular directions.
Here is a desk that summarizes the important thing factors for finding the water filter:
| Step | Key Factors |
|---|---|
| 1 | Establish the placement of the filter housing. |
| 2 | Decide the kind of filter you’ve got. |
| 3 | Examine the filter housing for seen indicators or seek the advice of the consumer handbook for particular directions. |
Inspecting the O-Rings
Inspecting the O-rings is an important step to make sure a leak-free connection when altering your PUR water filter. Observe these detailed directions to correctly examine the O-rings:
1. Find the O-rings:
- Take away the outdated filter cartridge.
- Examine the within of the filter head for 2 O-rings.
2. Take away the O-rings:
- Use a small screwdriver or tweezers to softly take away the O-rings from their grooves.
- Watch out to not injury the O-rings throughout removing.
3. Examine the O-rings for injury:
- Look at the O-rings for any cuts, cracks, or tears.
- If any injury is discovered, the O-rings have to be changed earlier than putting in the brand new filter cartridge.
4. Clear and lubricate the O-rings:
- Wash the O-rings completely with heat soapy water and rinse effectively.
- Apply a small quantity of food-grade silicone grease to the O-rings, making certain even distribution across the total floor.
- Lubricating the O-rings will assist create a watertight seal and prolong their lifespan.
5. Reinstall the O-rings:
- Place the lubricated O-rings again into their grooves within the filter head.
- Be sure the O-rings are totally seated and never twisted.
Inspecting the O-rings correctly ensures a safe and leak-free connection, guaranteeing optimum efficiency of your PUR water filter.
Putting in the New Filter
After you have eliminated the outdated filter, it is time to set up the brand new one. Listed here are the steps it’s essential to comply with:
1. Unpack the New Filter
Take away the brand new filter from its packaging and examine to make it possible for it seems to be undamaged.
2. Lubricate the O-Rings
Apply a small quantity of food-grade lubricant to the O-rings on the brand new filter. It will assist to create a watertight seal.
3. Align the Filter with the Housing
Align the brand new filter with the housing and insert it into the outlet. Guarantee that the O-rings are seated correctly within the grooves.
4. Rotate the Filter Clockwise
Flip the filter clockwise till it’s hand-tight. Don’t overtighten the filter, as this might injury the housing.
5. Flush the Filter (Really useful)
After putting in the brand new filter, it is suggested to flush it for a couple of minutes to take away any free carbon particles. To do that, merely activate the chilly water faucet and let the water run via the filter for 3-5 minutes.
After you have flushed the filter, you possibly can take pleasure in clear, filtered water out of your PUR faucet.
Flushing the Filter
After putting in the brand new filter, it’s essential to flush it correctly to take away any carbon fines or activated carbon mud that will have gathered throughout transportation or storage. Flushing the filter ensures that the water allotted out of your PUR system is clear and freed from contaminants.
- Activate the chilly water faucet and let it run via the filter for five minutes.
- Fill a clear container with the flushed water and discard it.
- Repeat steps 1 and a couple of two extra occasions for a complete of three flushes.
- New PUR water filter
- Wiping material
- Take away the outdated filter by twisting it counterclockwise.
- Insert the brand new filter into the housing and twist it clockwise till it’s tight.
- Run water via the filter for five minutes to flush out any impurities.
After finishing the flushing course of, your PUR water filter shall be prepared to make use of. Bear in mind to flush the filter each 6 months or as beneficial by the producer’s directions to keep up its effectiveness and make sure the supply of fresh, wholesome ingesting water.
Desk: Flushing Time Suggestions
| Filter Kind | Flushing Time |
|---|---|
| Faucet Mount Filters | 5 minutes |
| Countertop Filters | 10 minutes |
| Beneath Sink Filters | 1 gallon |
Testing for Leaks
As soon as the brand new filter is put in, it is important to check for leaks. Observe these steps to make sure a leak-free system:
1. Activate the water provide
Slowly activate the water provide valve to permit water to circulation via the filter.
2. Examine the connections
Examine the connections between the filter housing and the water strains for any leaks. Use a flashlight to examine for moisture or drips.
3. Examine the filter head
Look at the filter head the place the filter cartridge screws into the housing. Search for any leaks or seeping water across the seal.
4. Examine the dispenser
Dispense some water from the tap or dispenser and examine for leaks on the spout or some other a part of the dispenser.
5. Wait 10 minutes
After operating the water, wait about 10 minutes to permit the system to settle. This offers time for any potential leaks to grow to be obvious.
6. Examine the ground and counter tops
Examine across the filter, water strains, and dispenser for any puddles of water or moisture on the ground or counter tops. These might point out a leak.
7. Repeat the take a look at
If you happen to discover any leaks, flip off the water provide and tighten the connections or exchange the defective half. Repeat the take a look at once more till no leaks are detected.
8. Troubleshooting frequent leaks
If you happen to encounter any persistent leaks, this is a troubleshooting desk that can assist you determine and resolve the difficulty:
| Leak Location | Potential Causes and Options |
|---|---|
| Filter housing connections | – Unfastened connections: Tighten the connections utilizing a wrench or pliers. – Broken O-rings: Change the O-rings with new ones. |
| Filter head | – Unfastened filter cartridge: Take away and reinstall the filter cartridge, making certain it is correctly seated and tightened. |
| Dispenser spout | – Worn-out or broken washers: Change the washers within the dispenser spout. |
Sustaining the Filter
To make sure clear and wholesome water, it is essential to often keep your PUR water filter. Here is a step-by-step information on the right way to do it:
1. Collect Supplies
Earlier than you start, collect the next supplies:
2. Flip Off the Water Provide
Find the water provide valve and switch it off. It will stop water from flowing whilst you change the filter.
3. Take away the Outdated Filter
Seize the outdated filter and twist it counterclockwise to take away it from the mounting bracket.
4. Clear the Housing
Use a moist material to wipe down the within of the filter housing. Take away any particles or mineral buildup.
5. Insert the New Filter
Take away the brand new filter from its packaging and insert it into the clear housing. Twist the filter clockwise till it stops to safe it.
6. Flip On the Water Provide
Steadily activate the water provide valve.
7. Flush the Filter
Let the water run via the filter for about 5 minutes to flush out any remaining air or particles.
8. Examine for Leaks
Examine the filter and connections for any leaks. Tighten the filter if mandatory.
9. Reset the Filter Indicator
In case your PUR system has a filter indicator, press and maintain the reset button for a couple of seconds to reset it.
10. Monitor the Filter Recurrently
PUR filters usually final for six months or 100 gallons of filtered water. Monitor your filter’s utilization and exchange it when mandatory to make sure optimum efficiency and water high quality.
How To Change The Pur Water Filter
Altering the PUR water filter is a straightforward course of that may be accomplished in a couple of minutes. Listed here are the steps on the right way to change the PUR water filter:
