Should you’ve misplaced your keys or had them stolen, you might be questioning learn how to rekey a Kwikset lock with no key. Happily, it is a comparatively easy course of that may be executed with just a few fundamental instruments. On this article, we’ll stroll you thru the steps on learn how to rekey a Kwikset lock with no key.
Earlier than you start, you will want to assemble just a few instruments. You may want a small screwdriver, a pair of pliers, and a brand new Kwikset key. You should purchase a brand new key from a ironmongery shop or on-line. After you have your instruments, you possibly can start the method of rekeying your lock.
Gathering Important Instruments
Rekeying a Kwikset lock with no key requires just a few important instruments. Earlier than embarking on this activity, guarantee you’ve gotten the next objects at your disposal:
Lock Rekey Package
A Kwikset lock rekey package is specifically designed for rekeying Kwikset locks. It usually features a sequence of substitute pins, springs, and a rekeying device. These kits can be found at most {hardware} shops and on-line retailers.
Screwdriver
You may want a small, flathead screwdriver to take away the lock cylinder from the door. Select a screwdriver that matches snugly into the screw heads to attenuate the chance of stripping.
Punch Device
A punch device is used to drive the pins out of the lock cylinder. It must be sufficiently small to suit contained in the cylinder and lengthy sufficient to succeed in the pins.
Key Clean
A key clean is important for creating a brand new key that can function the rekeyed lock. Select a key clean that’s suitable along with your Kwikset lock.
Along with these important instruments, you may additionally discover the next objects useful:
| Merchandise | Objective |
|---|---|
| Lubricating oil | Lubricating the brand new pins and comes |
| Small brush or compressed air | Cleansing the lock cylinder |
Eradicating the Knob
Earlier than you possibly can rekey a Kwikset lock with no key, you could take away the knob. This can be a comparatively easy course of that may be accomplished in a couple of minutes.
To take away the knob, you will want a screwdriver. First, insert the screwdriver into the small gap on the facet of the knob. Then, flip the screwdriver counterclockwise till the knob loosens. As soon as the knob is unfastened, you possibly can pull it off the door.
After you have eliminated the knob, you will want to take away the lock cylinder. To do that, insert the screwdriver into the small gap on the again of the lock cylinder. Then, flip the screwdriver counterclockwise till the lock cylinder loosens. As soon as the lock cylinder is unfastened, you possibly can pull it out of the door.
Now that you’ve got eliminated the lock cylinder, you possibly can rekey it. To do that, you will want a rekeying package. A rekeying package usually features a new key, a set of pins, and a wrench.
To rekey the lock cylinder, comply with these steps:
- Insert the brand new key into the lock cylinder.
- Flip the important thing to the locked place.
- Insert the wrench into the small gap on the again of the lock cylinder.
- Flip the wrench counterclockwise till the lock cylinder loosens.
- Pull the lock cylinder out of the door.
- Take away the outdated pins from the lock cylinder.
- Insert the brand new pins into the lock cylinder.
- Reinsert the lock cylinder into the door.
- Flip the wrench clockwise to tighten the lock cylinder.
- Insert the brand new key into the lock cylinder.
- Flip the important thing to the unlocked place.
Suggestions
- In case you are having bother eradicating the knob or the lock cylinder, you possibly can strive utilizing a lubricant.
- In case you are not snug rekeying the lock cylinder your self, you possibly can take it to a locksmith.
- Rekeying a lock cylinder is a comparatively easy course of, however it is very important comply with the directions fastidiously.
Instruments Wanted
| Device | Use |
|---|---|
| Screwdriver | Take away the knob and lock cylinder |
| Rekeying package | Rekey the lock cylinder |
| Lubricant | Assist take away the knob or lock cylinder (non-obligatory) |
Disassembling the Knob Deal with
Step 3: Eradicating the Inside Deal with
Start by finding the small hex screw located on the facet of the inside deal with. Utilizing the suitable hex key or Allen wrench, fastidiously loosen the screw.
As soon as the screw is eliminated, grip the deal with firmly and pull it straight in the direction of you. It ought to slide off the spindle with ease. Nonetheless, if it resists, gently wiggle it forwards and backwards whereas pulling to launch it.
Upon eradicating the inside deal with, you’ll discover the keyhole cylinder uncovered. Be aware of the steel C-clip securing the cylinder to the lock physique. This clip will should be eliminated within the subsequent step.
To help you with the next steps, we’ve summarized the disassembly course of in a desk beneath:
| Step | Motion |
|---|---|
| 1 | Find the hex screw on the facet of the inside deal with. |
| 2 | Loosen the hex screw utilizing the suitable hex key or Allen wrench. |
| 3 | Grip the inside deal with and pull it straight in the direction of you to slip it off the spindle. |
| 4 | Be aware the keyhole cylinder uncovered after eradicating the deal with. |
| 5 | Establish the steel C-clip securing the cylinder to the lock physique. |
Figuring out the Shear Line
Step 4: Find the Shear Line
a) Look at the keyway of the lock. You’ll discover a skinny, raised line operating horizontally throughout the center of the keyway. That is the shear line.
b) Insert a small, flat-head screwdriver or decide into the keyway and align it with the shear line. Gently push down on the screwdriver or decide till you’re feeling resistance.
c) After you have situated the shear line, mark its place on the keyway with a pencil or marker. This may function a reference level for rekeying the lock.
| Instruments required |
|---|
| Small, flat-head screwdriver or decide |
| Pencil or marker |
Rekeying the Lock Cylinder
Rekeying the lock cylinder is a extra complicated course of however it may be executed with no key. You will have to buy a brand new lock cylinder on your Kwikset lock and a rekeying package. The rekeying package will include directions on learn how to disassemble the lock cylinder and reassemble it with the brand new key.
Listed here are the steps on learn how to rekey a Kwikset lock cylinder with no key:
- Take away the lock cylinder. To do that, first take away the screws which can be holding the lock cylinder in place. Then, use a screwdriver or a pair of pliers to tug the lock cylinder out of the lock.
- Disassemble the lock cylinder. As soon as the lock cylinder is eliminated, you will want to disassemble it. To do that, first take away the C-clip that’s holding the cylinder collectively. Then, pull the plug and key pins out of the cylinder.
- Reassemble the lock cylinder with the brand new key. To do that, first insert the brand new key into the cylinder. Then, insert the plug and key pins into the cylinder within the right order. Lastly, change the C-clip.
- Reinstall the lock cylinder. As soon as the lock cylinder is reassembled, you possibly can reinstall it within the lock. To do that, first insert the lock cylinder into the lock. Then, change the screws which can be holding the lock cylinder in place.
- Check the brand new key. As soon as the lock cylinder is reinstalled, you possibly can check the brand new key. To do that, insert the brand new key into the lock and switch it. The lock ought to now open and shut easily.
Suggestions for Rekeying a Kwikset Lock Cylinder With no Key
Listed here are some suggestions for rekeying a Kwikset lock cylinder with no key:
| Tip | Description |
|---|---|
| Use a rekeying package. | A rekeying package will include the entire instruments and directions that you could rekey a Kwikset lock cylinder. |
| Watch out when disassembling and reassembling the lock cylinder. | The lock cylinder is a fragile piece of equipment. In case you are not cautious, you would injury it. |
| Check the brand new key earlier than you reinstall the lock cylinder. | This may be sure that the brand new key works correctly. |
Reassembling the Knob Deal with
To reassemble the knob deal with, comply with these steps:
1.
Rotate the knob deal with clockwise to the vertical place.
2.
Insert the bottom of the lock cylinder into the opening within the knob deal with.
3.
Align the holes within the knob deal with and lock cylinder.
4.
Safe the lock cylinder by urgent on the bottom.
5.
Insert the screw into the knob deal with and tighten it till the knob deal with is safe.
6.
Utilizing a pair of needle-nose pliers, gently insert one tip into the opening on the backside of the knob deal with. Grip the C-clip with the pliers and pull it outward. The C-clip will snap off, releasing the knob deal with from the lock meeting.
| Aspect | Steps |
|---|---|
| Left | Pull the clip in the direction of the left facet of the doorknob to take away it |
| Proper | Pull the clip in the direction of the correct facet to take away it |
With the C-clip eliminated, you possibly can simply pull the knob deal with off the lock meeting.
Reinstalling the Knob
As soon as the lock cylinder has been changed, it is time to reinstall the knob. This is learn how to do it:
- Slide the knob onto the spindle.
- Align the set screw holes on the knob with the holes on the spindle.
- Insert the set screws into the holes and tighten them utilizing an Allen key.
- Slide the escutcheon (the ornamental plate across the knob) over the knob.
- Align the screw holes on the escutcheon with the screw holes on the door.
- Insert the screws into the holes and tighten them utilizing a screwdriver.
- Check the knob to ensure it is working correctly. It ought to flip easily and open the door simply.
Further Suggestions for Reinstalling the Knob:
– If the knob does not flip easily, it could be essential to lubricate it. Use a graphite-based lubricant or a sprig lubricant particularly designed for door locks.
– If the knob is unfastened, it could be essential to tighten the set screws. Use a magnet to retrieve the set screws in the event that they fall into the door.
– If the escutcheon is unfastened, it could be essential to tighten the screws.
– If the knob nonetheless does not work correctly, it could be needed to exchange it.
Testing the Rekeyed Lock
After rekeying the lock, it is essential to check it completely to make sure it capabilities accurately. This is learn how to do it:
- Insert the newly minimize key into the rekeyed lock and switch it to the locked place. The important thing ought to match easily and switch effortlessly.
- Try to unlock the lock with outdated keys or keys from different locks. If the lock stays safe and solely opens with the brand new key, the rekeying course of was profitable.
- Insert the important thing at barely completely different angles to simulate real-world utilization. The lock ought to function easily whatever the angle the hot button is inserted.
- Hear for any binding or grinding sounds when turning the important thing. If the important thing feels sticky or makes noises, it could point out that the rekeying was not executed accurately.
- Repeatedly lock and unlock the door a number of occasions to make sure that the brand new key constantly operates the lock easily.
- Apply a small quantity of graphite powder or lock lubricant to the keyhole to make sure easy operation and forestall put on.
- If the lock doesn’t perform correctly after rekeying, do not hesitate to contact an expert locksmith for additional help.
Insert the New Key
Attempt Totally different Keys
Check with Totally different Angles
Verify for Binding
Cycle the Lock
Lubricate the Lock
Name for Help
By following these steps, you possibly can completely check the rekeyed lock and be sure that it operates as anticipated, offering you with peace of thoughts and enhanced safety.
Troubleshooting Widespread Points
1. The lock nonetheless does not work after rekeying.
Verify that the hot button is absolutely inserted into the lock and turned all the way in which. If the hot button is not inserted all the way in which, it could not be capable of have interaction the pins within the lock cylinder. Additionally, ensure that the hot button is minimize accurately. If the hot button is not minimize accurately, it could not be capable of flip the lock cylinder.
2. The secret is caught within the lock.
If the hot button is caught within the lock, don’t drive it. You might injury the important thing or the lock. As an alternative, attempt to wiggle the important thing gently whereas pulling it out. If the important thing nonetheless doesn’t come out, you might have to name a locksmith.
3. The lock is jammed.
If the lock is jammed, don’t drive it. You might injury the lock. As an alternative, attempt to lubricate the lock with a graphite-based lubricant. If the lock nonetheless doesn’t work, you might have to name a locksmith.
4. The lock is making a wierd noise.
If the lock is making a wierd noise, it could be an indication that the lock is broken. It’s best to have the lock inspected by a locksmith as quickly as doable.
5. The lock just isn’t working correctly.
If the lock just isn’t working correctly, it could be an indication that the lock is worn out. It’s best to have the lock changed by a locksmith.
6. The lock just isn’t safe.
If the lock just isn’t safe, it could be an indication that the lock just isn’t put in accurately. It’s best to have the lock inspected by a locksmith as quickly as doable.
7. The lock just isn’t weatherproof.
If the lock just isn’t weatherproof, it could be an indication that the lock just isn’t put in accurately. It’s best to have the lock inspected by a locksmith as quickly as doable.
8. The lock just isn’t fireproof.
If the lock just isn’t fireproof, it could be an indication that the lock just isn’t put in accurately. It’s best to have the lock inspected by a locksmith as quickly as doable.
9. Different issues
Should you encounter every other issues along with your Kwikset lock, you possibly can seek the advice of the Kwikset web site or name Kwikset customer support.
| Downside | Resolution |
|—|—|
| The lock is caught | Lubricate the lock with a graphite-based lubricant. |
| The secret is caught within the lock | Don’t drive it. Attempt to wiggle the important thing gently whereas pulling it out. |
| The lock is jammed | Don’t drive it. Attempt to lubricate the lock with a graphite-based lubricant. |
| The lock is making a wierd noise | Have the lock inspected by a locksmith. |
| The lock just isn’t working correctly | Have the lock changed by a locksmith. |
| The lock just isn’t safe | Have the lock inspected by a locksmith. |
| The lock just isn’t weatherproof | Have the lock inspected by a locksmith. |
| The lock just isn’t fireproof | Have the lock inspected by a locksmith. |
Security Issues
Earlier than you start rekeying your Kwikset lock, it is essential to take the next security precautions:
1. Guarantee Your Security
Put on gloves to guard your arms from sharp edges. Use a flashlight to light up the lock if it is in a dimly lit space. Should you’re not snug rekeying the lock your self, contact a professional locksmith.
2. Take away Energy from Linked Units
If the lock is related to an electrical strike or different digital machine, guarantee the ability is turned off to stop electrical shock.
3. Clear the Space
Take away any obstacles or muddle from the realm across the lock to offer a transparent and secure workspace.
4. Preserve Kids and Pets Away
Kids and pets can simply get injured by lock parts, so maintain them out of attain whereas rekeying the lock.
5. Use Correct Instruments
Solely use the instruments designed for rekeying Kwikset locks. Keep away from utilizing screwdrivers or different improvised instruments that might injury the lock.
6. Observe Directions Fastidiously
Learn the directions for rekeying the lock completely earlier than beginning. Should you’re not sure about any step, cease and search skilled assist.
7. Keep away from Over-Tightening Screws
Tighten the screws simply sufficient to safe the parts with out stripping them or damaging the lock.
8. Check the Lock Earlier than Closing
After rekeying, check the lock with a brand new key to make sure it operates easily. If there are any points, repeat the rekeying course of.
9. Lubricate the Lock
Apply a small quantity of lock lubricant to the keyway and shifting components to stop rust and guarantee easy operation.
10. Retailer Pinning Package Securely
Should you’re utilizing a pinning package, maintain it away from kids and pets. Guarantee they’re saved in a secure location after finishing the rekeying course of.
How To Rekey A Kwikset Lock With out A Key
Rekeying a Kwikset lock with no key is usually a daunting activity, however it’s doable with the correct instruments and a bit little bit of endurance. Here’s a step-by-step information on learn how to do it:
- Collect your instruments. You will have a small screwdriver, a pair of needle-nose pliers, and a brand new Kwikset key.
- Take away the screws. There are two screws situated on the within of the door deal with. Take away these screws with the screwdriver.
- Take away the deal with. As soon as the screws are eliminated, you possibly can pull the deal with straight off of the door.
- Take away the faceplate. There’s a small faceplate situated on the within of the door. Take away this faceplate with the screwdriver.
- Take away the cylinder. The cylinder is the a part of the lock that accommodates the pins. Use the needle-nose pliers to grip the cylinder and pull it straight out of the door.
- Take away the outdated pins. The outdated pins are situated contained in the cylinder. Use the screwdriver to push them out of the cylinder.
- Insert the brand new pins. The brand new pins are included with the brand new Kwikset key. Insert the brand new pins into the cylinder in the identical order because the outdated pins.
- Reassemble the lock. Reassemble the lock in reverse order. Begin by inserting the cylinder into the door. Then, change the faceplate. Subsequent, change the deal with. Lastly, change the screws.
- Check the lock. As soon as the lock is reassembled, check it with the brand new key. The lock ought to now work correctly.
Folks Additionally Ask About How To Rekey A Kwikset Lock With out A Key
Does rekeying a lock weaken it?
Rekeying a lock doesn’t weaken it. The truth is, it could truly make it stronger. Whenever you rekey a lock, you might be changing the outdated pins with new pins. This makes it harder for somebody to select the lock.
Is it troublesome to rekey a Kwikset lock?
Rekeying a Kwikset lock just isn’t troublesome, but it surely does require some endurance and a focus to element. Should you comply with the steps outlined on this information, it’s best to be capable of rekey your lock with none issues.
How a lot does it price to rekey a Kwikset lock?
The fee to rekey a Kwikset lock will fluctuate relying on the locksmith you select. Nonetheless, most locksmiths will cost between $20 and $50 to rekey a lock.
