Bathe wall panels have turn into more and more standard amongst owners and contractors alike. They’re an effective way to present your toilet a brand new, up to date look with out the trouble and expense of conventional tile. Bathe wall panels are made up of sturdy acrylic materials that’s proof against water injury, mildew and mildew. They’re light-weight, straightforward to chop and set up, making them a DIY-friendly undertaking that may be accomplished in a weekend.
Earlier than you start, it is important to collect the required instruments and supplies. This features a tape measure, pencil, degree, utility knife, caulk gun, and a wide range of screws. Moreover, be sure that your bathe space is clear, dry, and degree. This can assist to make sure a correct set up and a great-looking toilet.
Step one in putting in bathe wall panels is to measure and mark the wall the place you’ll be putting in the panels. Use a degree to make sure that the marks are degree and straight. After getting marked the wall, use a utility knife to chop the panels to dimension. Remember to reduce the panels barely bigger than the marked space, as you’ll be able to trim them down to suit as soon as they’re put in. Apply a bead of caulk to the again of the panels and press them into place on the wall. Use a degree to make sure that the panels are straight and safe them with screws. Proceed putting in the panels till the wall is full.
Ending Touches and Sealing
Step 6: Grouting
Apply grout to the joints between the panels, utilizing a grout float. Press the grout firmly into the joints and take away any extra.
Step 7: Sealing the Joints and Corners (Detailed Directions)
a) Joint Sealing: Use a silicone caulk gun to use a bead of silicone caulk alongside the size of every joint, together with the place the panels meet the bathe base and partitions.
b) Nook Sealing: Apply a beneficiant quantity of silicone caulk to the within corners of the bathe, the place the panels meet. Use a caulk ending device to easy out and form the caulk joint.
c) Extra Removing: Instantly wipe away any extra caulk from the floor of the panels utilizing a moist material.
d) Curing Time: Permit the caulk to remedy utterly in accordance with the producer’s directions, usually for twenty-four hours.
e) Closing Inspection: As soon as the caulk has cured, fastidiously examine the joints and corners for any gaps or imperfections. Apply extra caulk if crucial.
Step 8: Putting in Trim
Set up trim across the edges of the bathe partitions and doorways to cowl the uncovered edges of the panels and create a completed look.
How one can Set up Bathe Wall Panels
Putting in bathe wall panels is an effective way to replace the look of your toilet with out having to do an entire rework. It’s a comparatively straightforward undertaking that may be accomplished in a weekend. Listed here are the steps on how one can do it:
- Put together the partitions. Step one is to organize the partitions by eradicating any previous fixtures or tile. Additionally, you will have to make it possible for the partitions are clear and dry.
- Set up a backer board. A backer board is a skinny sheet of fabric that helps to help the bathe wall panels. It’s usually fabricated from cement or plastic. Set up the backer board by screwing it into the studs within the wall.
- Apply adhesive to the backer board. You have to to use a building adhesive to the backer board earlier than putting in the bathe wall panels. Use a trowel to unfold the adhesive evenly over the floor of the backer board.
- Set up the bathe wall panels. Beginning within the nook of the room, set up the bathe wall panels separately. Press the panels into the adhesive and make it possible for they’re degree. Use a utility knife to trim any extra panels.
- Caulk the joints. As soon as the bathe wall panels are put in, you’ll need to caulk the joints between the panels. Use a silicone caulk and apply it evenly alongside the joints.
- Set up the trim. The ultimate step is to put in the trim across the bathe wall panels. The trim will assist to cowl the perimeters of the panels and provides the bathe a completed look.
Folks Additionally Ask
What’s one of the best ways to chop bathe wall panels?
One of the simplest ways to chop bathe wall panels is to make use of a utility knife. Rating the panel alongside the specified reduce line after which snap it off. It’s also possible to use a round noticed to chop the panels, however make sure you use a fine-tooth blade to keep away from chipping the panels.
How do I clear bathe wall panels?
Bathe wall panels are straightforward to wash. Merely wipe them down with a moist material and delicate cleaning soap. It’s also possible to use a vinegar and water answer to take away any exhausting water stains.
How lengthy do bathe wall panels final?
Bathe wall panels can final for a few years. They’re fabricated from sturdy supplies which can be proof against moisture and mildew. Nevertheless, the lifespan of the panels will rely upon the standard of the panels and the set up course of.
