Featured picture:
The Toyota Supra Mk5 is a high-performance sports activities automobile that’s identified for its glossy design and highly effective engine. Nonetheless, like all autos, the Supra Mk5’s seat belts can turn into worn or broken over time. If that you must change the seat belt in your Supra Mk5, it is very important comply with the right steps to make sure that the brand new seat belt is put in correctly and safely.
Changing the seat belt in a Toyota Supra Mk5 shouldn’t be a tough process, however it is very important take your time and comply with the steps rigorously. Earlier than you start, you will want to collect the next instruments: a 10mm socket wrench, a 12mm socket wrench, a flathead screwdriver, and a brand new seat belt. Upon getting gathered your instruments, you possibly can start the substitute course of.
First, you will want to take away the previous seat belt. To do that, find the 2 10mm bolts which are holding the seat belt in place. Upon getting discovered the bolts, take away them utilizing the 10mm socket wrench. As soon as the bolts have been eliminated, you possibly can pull the seat belt out of the car. Subsequent, you will want to put in the brand new seat belt. To do that, insert the brand new seat belt into the car and line up the holes within the seat belt with the holes within the car. As soon as the holes are lined up, insert the 2 10mm bolts and tighten them utilizing the 10mm socket wrench. Lastly, you will want to check the brand new seat belt to ensure that it’s working correctly.
Figuring out and Accessing Seat Belt Mounting Factors
Figuring out Seat Belt Mounting Factors
The seat belt mounting factors in a Toyota Supra Mk5 are positioned in varied positions inside the car’s inside. Figuring out these factors is crucial earlier than trying to switch the seat belt:
-
Entrance Seat Belts: The entrance seat belts are mounted at three factors. The higher mounting level is located on the B-pillar, whereas the 2 decrease mounting factors are positioned on the ground beneath the entrance seats.
-
Rear Seat Belts: The rear seat belts are mounted at 4 factors. The 2 higher mounting factors are positioned on the C-pillars, whereas the 2 decrease mounting factors are positioned on the sidewalls behind the rear seats.
-
Shoulder Belts: The shoulder belts are mounted at two factors. The higher mounting level is located on the B-pillar or C-pillar, relying on the seat location, whereas the decrease mounting level is positioned on the rear parcel shelf.
Accessing Seat Belt Mounting Factors
As soon as the seat belt mounting factors have been recognized, it’s essential to entry them with a purpose to change the seat belt. This may increasingly contain eradicating trim panels, seat cushions, or different elements that impede entry to the mounting factors.
-
Entrance Seat Belts: Accessing the entrance seat belt mounting factors requires eradicating the decrease seat cushion and the facet trim panels.
-
Rear Seat Belts: Accessing the rear seat belt mounting factors requires eradicating the facet trim panels and the rear parcel shelf.
-
Shoulder Belts: Accessing the shoulder belt mounting factors requires eradicating the trim panel positioned close to the higher mounting level on the B-pillar or C-pillar.
| Seat Belt | Higher Mounting Level | Decrease Mounting Level |
|---|---|---|
| Entrance Seat Belts | B-pillar | Flooring beneath entrance seats |
| Rear Seat Belts | C-pillars | Sidewalls behind rear seats |
| Shoulder Belts | B-pillar or C-pillar | Rear parcel shelf |
Inspecting and Getting ready New Seat Belt
1. Study the Seat Belt
Totally examine the brand new seat belt for any seen injury or defects. Search for tears, frays, or cuts within the webbing. Verify the buckle and retractor mechanism for correct operation. In case you discover any points, don’t set up the seat belt and phone the producer for a substitute.
2. Collect Obligatory Instruments
Collect the next instruments earlier than starting the substitute course of: a socket wrench or spanner, pliers, and a flathead screwdriver. You may additionally want a flashlight for higher visibility whereas working in tight areas.
3. Disconnect the Battery
Security first! Disconnect the adverse terminal of the battery to stop any potential electrical hazards in the course of the set up.
4. Take away the Previous Seat Belt Elements
Find the bolts that safe the seat belt to the car body. Utilizing the socket wrench, take away the bolts and detach the seat belt meeting from the body. Disconnect the buckle and retractor mechanism from the seat. Fastidiously take away the seat belt from the car.
Detailed Directions for Eradicating Seat Belt Elements:
a. Entrance Seat Belt
| Step | Description |
|---|---|
| Find | Determine the 2 bolts that join the seat belt to the B-pillar and the ground |
| Take away | Use the socket wrench to unscrew the bolts and detach the seat belt |
| Disconnect | Unclip the buckle and retractor mechanism from the seat |
b. Rear Seat Belt
| Step | Description |
|---|---|
| Find | Discover the bolt that secures the seat belt to the rear physique panel |
| Take away | Use the socket wrench to take away the bolt and detach the seat belt |
| Disconnect | Unclip the buckle from the seat |
How To Change Seat Belt In Toyota Supra Mk5
Changing a seat belt in a Toyota Supra Mk5 is a comparatively easy course of that may be accomplished in about an hour. Listed here are the steps on the best way to do it:
1.
Disconnect the adverse battery terminal.
2.
Find the seat belt bolt on the underside of the seat. Take away the bolt after which pull the seat belt out of the seat.
3.
Unbolt the seat belt retractor from the automobile body. Disconnect {the electrical} connector from the retractor.
4.
Set up the brand new seat belt retractor and join {the electrical} connector.
5.
Insert the seat belt into the seat and bolt it down.
6.
Reconnect the adverse battery terminal.
How a lot does it price to switch a seat belt in a Toyota Supra Mk5?
Changing a seat belt in a Toyota Supra Mk5 will usually price between $100 and $200 for components and labor.
What are the signs of a nasty seat belt in a Toyota Supra Mk5?
There are a number of signs that will point out a nasty seat belt in a Toyota Supra Mk5, together with:
1.
The seat belt doesn’t retract correctly.
2.
The seat belt is frayed or broken.
3.
The seat belt buckle doesn’t latch correctly.
4.
The seat belt warning gentle is illuminated.
