Embark on a journey of precision as we delve into the intricate world of PlayStation 5 controller disassembly. With meticulous care, we’ll uncover the hidden mechanisms and parts that orchestrate the charming gaming expertise delivered by this pinnacle of gaming expertise. Put together your instruments and regular your arms, for we’re about to unlock the secrets and techniques that lie throughout the coronary heart of the PS5 controller.
Earlier than commencing this delicate process, it’s crucial to assemble the mandatory tools. Assemble a precision screwdriver set, a pair of tweezers, and a small, soft-bristled brush. Moreover, a clear and well-lit workspace is crucial to make sure readability and forestall any mishaps. As soon as your instruments are on the prepared, it’s time to embark on this charming journey.
With the controller firmly in hand, start by eradicating the 4 seen screws situated on the again. These screws safe the faceplate, which homes the buttons, joysticks, and triggers. Utilizing the precision screwdriver, rigorously unscrew every screw and set them apart in a secure place. With the screws eliminated, the faceplate might be gently lifted away, revealing the intricate interior workings of the controller.
Disassembling the Outer Shell
Earlier than disassembling the PS5 controller, it is essential to energy it down and disconnect it from any exterior gadgets. This is a step-by-step information to rigorously take away the outer shell:
-
Find the Launch Catches: On the again of the controller, close to the shoulder buttons, you will discover two small launch catches. Use your thumbs or a plastic prying device to softly press and maintain each catches concurrently.
-
Slide the Again Panel Off: Whereas holding the discharge catches, rigorously slide the again panel of the controller in direction of the underside. It’s best to really feel a slight resistance because the panel separates from the chassis. Proceed sliding it down till the panel is totally eliminated.
-
Disconnect the Battery: As soon as the again panel is off, you will see the controller’s battery. It is related to the motherboard by a small connector. Use a spudger or a plastic prying device to rigorously disconnect the battery. Ensure that to not pull on the battery wires, as this might harm them.
-
Take away the Facet Handles: On all sides of the controller, you will discover two small screws situated on the backside of the aspect handles. Use a precision screwdriver to take away these screws, after which gently pull the aspect handles away from the chassis.
-
Raise the Entrance Panel: The entrance panel of the controller is now held in place by clips on the high and backside. Rigorously raise the entrance panel up from the underside, utilizing your fingernails or a plastic prying device. As you raise the panel, be aware of the ribbon cable that connects the entrance panel to the motherboard.
-
Disconnect the Ribbon Cable: As soon as the entrance panel is lifted, you will see a small ribbon cable that connects it to the motherboard. Use a spudger or a plastic prying device to softly raise the ribbon cable out of its connector.
Eradicating the Battery
To take away the battery, you will must:
1. Energy down your PS5 controller.
2. Find the small screw on the again of the controller, close to the underside. Use a Phillips #00 screwdriver to take away the screw.
3. Rigorously pry open the again cowl of the controller, utilizing a plastic opening device or a skinny, flat object like a bank card.
4. Find the battery connector, which is a small, white plug. Use your fingernail or a plastic spudger to softly disconnect the battery connector from the motherboard.
5. Rigorously raise the battery out of the controller.
Battery Specs
The PS5 controller makes use of a chargeable lithium-ion battery with the next specs:
| Specification | Worth |
|---|---|
| Voltage | 3.65V |
| Capability | 1560mAh |
| Sort | Lithium-ion |
Detaching the Set off Buttons
Detaching the set off buttons is a comparatively easy course of, nevertheless it requires a little bit of precision to keep away from damaging the fragile parts. Listed below are the steps to observe:
1. Use a small Phillips screwdriver to take away the 2 screws situated on the underside of the controller, slightly below the triggers.
2. Grip the controller firmly and use your thumbs to softly pull the again shell away from the entrance shell. Begin on the backside of the controller and work your approach up, being cautious to not snap any of the plastic clips that maintain the 2 halves collectively.
3. As soon as the again shell is eliminated, you will have to disconnect the ribbon cables that join the set off buttons to the principle circuit board. To do that, use a pair of tweezers to softly raise the small black tabs that safe the connectors after which slide the cables out. Take care to not bend or tear the cables.
Here’s a desk summarizing the steps concerned in detaching the set off buttons:
| Step | Description |
|---|---|
| 1 | Take away the 2 screws situated on the underside of the controller. |
| 2 | Pull the again shell away from the entrance shell. |
| 3 | Disconnect the ribbon cables that join the set off buttons to the principle circuit board. |
Eradicating the Motherboard
To take away the motherboard, observe these steps:
1. Flip off the PlayStation 5 and unplug the facility cable.
2. Take away the 2 screws on the again of the controller that maintain the again panel in place.
3. Raise up the again panel to detach it from the entrance panel.
4. The motherboard is connected to the entrance panel by two ribbon cables and 4 screws.
- Find the ribbon cables that join the motherboard to the entrance panel. Gently raise the brown tab on the connector to launch the cable
- Find the 4 screws that safe the motherboard to the entrance panel. Take away these screws utilizing a Phillips #00 screwdriver
5. Rigorously raise the motherboard from the entrance panel, being aware of the fragile ribbon cables.
6. Set the motherboard apart in a secure place.
Disconnecting the Joysticks
Disconnecting the joysticks requires a cautious and systematic strategy to stop any harm to the parts. This is a step-by-step information with extra particulars:
- Find the Joystick Screws: Flip the controller over and determine the 4 screws situated across the joystick base. These screws are often hidden beneath small rubber caps that have to be pried off gently.
- Take away the Screws: Utilizing an appropriate screwdriver (often a Phillips #00), rigorously unscrew the 4 screws. Be cautious to not overtighten or strip the screws.
- Raise Off the Plastic Cowl: As soon as the screws are eliminated, gently raise off the plastic cowl that surrounds the joystick module. It could require a little bit of prying to launch it from the clips that maintain it in place.
- Disconnect the Ribbon Cable: The joystick module is related to the principle circuit board by a ribbon cable. Find the socket on the circuit board the place the cable is inserted and thoroughly slide it out utilizing your fingernail or a plastic spudger.
-
Detaching the Joystick Mount
As soon as the ribbon cable is disconnected, it’s good to detach the joystick module from its mount. This requires just a few extra steps:
- Examine the Joystick Mount: Look at the joystick mount for any small tabs or clips that could be holding the joystick in place.
- Apply Strain: Whereas holding the joystick module firmly, gently apply stress to the mount to launch the tabs or clips. Use a plastic spudger or your fingernails for leverage if obligatory.
- Take away the Joystick Module: As soon as the tabs or clips are launched, the joystick module ought to raise off the mount. Watch out to not pull too arduous on the ribbon cable, as it could harm the connection.
Detaching the Haptic Suggestions Motors
To detach the haptic suggestions motors, you will must take away the aspect panels first. That is carried out by merely prising them off together with your fingers or a plastic opening device. After you have carried out this, you will notice the motors connected to the motherboard. They’re held in place by two screws. Unscrew these and the motors will come free.
Watch out to not harm the cables connected to the motors. In case you do, it’s possible you’ll want to interchange them. After you have indifferent the motors, you possibly can proceed with the remainder of the disassembly course of.
Listed below are some extra suggestions for detaching the haptic suggestions motors:
- Use a plastic opening device to keep away from damaging the aspect panels.
- Watch out to not overtighten the screws when reattaching the motors.
- In case you harm the cables connected to the motors, it’s possible you’ll want to interchange them.
| Step | Description |
|---|---|
| 1 | Take away the aspect panels. |
| 2 | Find the haptic suggestions motors. |
| 3 | Unscrew the 2 screws holding the motors in place. |
| 4 | Detach the motors from the motherboard. |
Eradicating the Audio system
1. Take away the Faceplate
Begin by unclipping the faceplate from the controller. Use a plastic pry device or your fingernails to softly raise the sides of the faceplate and pull it away from the controller.
2. Disconnect the Battery
As soon as the faceplate is eliminated, find the battery connector. It needs to be a small, white connector situated close to the highest of the controller. Use a plastic pry device or your fingernails to disconnect the battery.
3. Take away the Again Cowl
Subsequent, take away the 4 screws securing the again cowl to the controller. These screws are situated across the perimeter of the again cowl. As soon as the screws are eliminated, gently raise the again cowl off the controller.
4. Take away the Vibration Motors
As soon as the again cowl is eliminated, you will notice two vibration motors connected to the controller. Use a plastic pry device or your fingernails to softly raise the vibration motors and disconnect them from the controller.
5. Take away the Set off Buttons
Find the set off buttons on both aspect of the controller. Use a plastic pry device or your fingernails to softly raise the set off buttons and disconnect them from the controller.
6. Take away the D-Pad and Analog Sticks
Gently pull the D-pad and analog sticks off the controller. They need to come off simply with out the necessity for any instruments.
7. Take away the Audio system
The audio system are situated contained in the controller, close to the highest. They’re connected to the controller with two screws. Use a Phillips #0 screwdriver to take away the screws and gently raise the audio system out of the controller.
| Speaker | Location |
|---|---|
| Left Speaker | Prime left of the controller |
| Proper Speaker | Prime proper of the controller |
Disassembling the Mild Bar
To disassemble the sunshine bar, you will have a Phillips #000 screwdriver.
1. Take away the 2 screws which might be situated on the again of the controller, close to the highest.
2. Rigorously raise the sunshine bar up and away from the controller.
3. Disconnect the sunshine bar cable from the controller.
4. The sunshine bar can now be faraway from the controller.
5. To reassemble the sunshine bar, merely observe these steps in reverse order.
Suggestions
Listed below are just a few suggestions for disassembling the sunshine bar:
- Watch out to not harm the sunshine bar cable when disconnecting it from the controller.
- In case you are having bother eradicating the sunshine bar, you need to use a plastic pry device that can assist you.
- Don’t use an excessive amount of pressure when eradicating the sunshine bar, as you might harm the controller.
Troubleshooting
In case you are having bother disassembling the sunshine bar, right here are some things you possibly can attempt:
- Just be sure you are utilizing the right screwdriver.
- Strive utilizing a plastic pry device that can assist you take away the sunshine bar.
- In case you are nonetheless having bother, you possibly can contact PlayStation help for help.
| Step | Motion |
| 1 | Take away the screws |
| 2 | Disconnect the sunshine bar cable |
| 3 | Take away the sunshine bar |
Separating the Touchpad
9. Gently raise the touchpad away from the remainder of the controller. It could be useful to make use of a plastic opening device or a skinny piece of plastic to pry the touchpad free. Watch out to not harm the touchpad or the encircling parts.
As soon as the touchpad is eliminated, you’ll have entry to the remainder of the controller’s inside parts. Now you can proceed with the remaining steps beneath to disassemble the PS5 controller.
| Half | Description |
|---|---|
| Touchpad | A capacitive touchpad used for navigation and management. |
| Touchpad Cable | A versatile cable that connects the touchpad to the controller’s mainboard. |
| Touchpad Buttons | Two small buttons situated on both aspect of the touchpad. |
Reassembling the Controller
After cleansing the controller parts, it is time to put all the things again collectively. Observe these detailed steps to make sure correct reassembly of your PS5 controller.
- Align the L2/R2 Triggers: Be certain that the tabs on the triggers are appropriately aligned with the slots on the body.
- Place the Buttons: Place the buttons (face buttons and D-pad) again into their respective slots. They need to snap into place.
- Insert the Thumbsticks: Align and insert the thumbsticks into their openings on the highest of the controller.
- Connect the Battery: Slide the battery again into its compartment and join the ribbon cable.
- Substitute the Outer Shell: Align the outer shell with the body and gently snap it into place across the edges.
- Screw within the Again Panel: Use 6 screws to safe the again panel to the body.
- Reattach the Touchpad Defend: Slide the touchpad defend again onto the controller and safe it with 2 screws.
- Align and Set up the Joysticks: Insert the joysticks into their slots on the entrance panel and safe them with 2 screws every.
- Slide within the Operate Buttons: Slide the Share, Choices, and Create buttons into their respective openings.
- Shut the Controller: Gently snap the back and front panels collectively, making certain a cosy match.
How To Take Ps5 Controller Aside
The PS5 controller is a well-made piece of kit, however like all electronics, it could typically malfunction. In case you’re experiencing issues together with your PS5 controller, taking it aside to scrub or restore it could be obligatory. This is a step-by-step information on how one can do it:
1. Take away the screws on the again of the controller. There are 4 screws in complete, two on all sides.
2. As soon as the screws are eliminated, rigorously pry open the again of the controller. It’s possible you’ll want to make use of a plastic pry device or a small screwdriver to do that.
3. Disconnect the battery from the motherboard. The battery is related by a small cable. Use tweezers or your fingernails to disconnect it.
4. Take away the motherboard from the controller. The motherboard is held in place by a number of screws. Take away these screws and thoroughly raise the motherboard out of the controller.
5. Clear or restore the motherboard as wanted. In case you’re experiencing issues together with your PS5 controller, the motherboard is the probably wrongdoer. Clear the motherboard with a comfortable fabric and rubbing alcohol and examine for any free or broken parts. In case you discover any broken parts, it’s possible you’ll want to interchange them.
6. Reassemble the controller in reverse order. As soon as you have cleaned or repaired the motherboard, reassemble the controller in reverse order. Ensure that to attach the battery earlier than tightening the screws on the again of the controller.
Folks Additionally Ask
How do I do know if my PS5 controller is damaged?
There are just a few indicators that your PS5 controller could also be damaged:
– It will not activate.
– The buttons or triggers do not work appropriately.
– The controller retains disconnecting from the console.
– The controller is making unusual noises.
