Binding is the ultimate step in finishing a quilt, and it could make or break the general look of the quilt. Along with offering sensible sturdiness, using materials that go effectively with the quilt high can improve the aesthetic enchantment and make them an ideal of completion. Binding will also be a good way so as to add a private contact to your quilt. In case you’re searching for a manner so as to add a professional-looking end to your quilt, binding is the proper answer. Binding might be executed utilizing number of completely different materials, so you may customise the look of your quilt to match your private fashion. Binding will also be executed utilizing quite a lot of completely different strategies, so you could find a way that works greatest for you.
French binding is a variation on conventional binding that ends in a fragile, refined end. The material is folded over the uncooked fringe of the quilt after which stitched in place, making a slender, even border. This system is commonly used on child quilts and different small initiatives. Double binding is another choice that gives a sturdy, sturdy end. With double binding, two strips of cloth are used to bind the quilt, making a thicker, extra substantial border. This system is commonly used on bigger quilts or quilts that might be subjected to heavy use.
Regardless of which binding method you select, the method is comparatively easy. First, you may want to chop strips of cloth for the binding. The width of the strips will range relying on the method you are utilizing, however they need to be about 2 1/2 inches extensive. After getting the strips lower, you may want to stitch them collectively to kind a steady strip. Then, you may want to connect the binding to the quilt. The strategy for attaching the binding will range relying on the method you are utilizing, however the common steps are the identical. As soon as the binding is hooked up, you may have to trim the surplus material and end the perimeters. Binding a quilt is an easy course of that may add a good looking of completion to your quilt. With a bit of follow, you can bind your quilts like a professional.
Deciding on the Proper Binding Cloth
When selecting a binding material in your quilt, there are a number of elements to contemplate to make sure a harmonious and sturdy end.
Coordinating with the Quilt
The binding ought to complement the general design and coloration scheme of your quilt. Think about using a material from the identical assortment or a coordinating print that enhances the quilt’s aesthetic enchantment. Alternatively, you may go for a contrasting material to create a bolder assertion.
Cloth Kind and Weight
The sort and weight of the binding material will affect its sturdiness and look. Cotton is a well-liked selection for its breathability, softness, and colorfastness. It is available in varied weights, with lighter-weight cottons, comparable to quilting cotton, being appropriate for smaller quilts, whereas heavier-weight cottons, comparable to canvas, present extra stability for bigger quilts.
Bias vs. Straight-Grain
Bias binding creates a extra versatile and curved edge than straight-grain binding. This makes it very best for quilts with curved edges or intricate appliqué work. Nonetheless, it requires extra material and might be more difficult to deal with. Straight-grain binding is extra easy to work with and gives a sturdier end, but it surely may end up in a barely much less versatile edge.
Desk: Binding Cloth Concerns
| Issue | Concerns |
|---|---|
| Coordinating with the Quilt | |
| Cloth Kind and Weight | |
| Bias vs. Straight-Grain |
Getting ready the Quilt for Binding
Deciding on the Binding Cloth
Select a material that enhances the quilt’s design and colours. Take into account the load and drape of the binding material, making certain it’s appropriate with the quilt’s weight.
Measuring and Slicing the Binding Strips
Step 1: Calculate the Whole Binding Size
Measure the perimeter of the quilt. Multiply this measurement by 1.25 to account for overlapping and shrinkage.
Step 2: Decide the Width of the Binding Strips
The usual binding strip width is 2.5 inches. In case you choose a wider or narrower binding, modify the measurements accordingly.
Step 3: Reduce the Binding Strips
Reduce the binding material into strips alongside the selvedge. The size of every strip needs to be equal to the entire binding size divided by the variety of strips required.
| Binding Strip Width | Variety of Strips Wanted |
|---|---|
| 2.5 inches | Whole binding size / 40 inches |
| 3 inches | Whole binding size / 36 inches |
| 3.5 inches | Whole binding size / 32 inches |
Slicing and Becoming a member of the Binding Strips
To create your binding strips, you may want to chop material strips which can be 2.5 inches extensive and the size of the perimeter of your quilt plus 10-12 inches additional for becoming a member of and ending.
As soon as your strips are lower, it is time to be part of them collectively right into a steady bias strip. To do that, align the uncooked edges of two strips at a 45-degree angle, proper sides collectively.
Sew a diagonal seam throughout the angled edges, beginning 1/4 inch from the purpose the place the materials meet and ending 1/4 inch earlier than the opposite fringe of the material. Trim the surplus material on the seam allowance, leaving a 1/4-inch seam allowance.
Press the seam allowance open and trim any extra threads. Now, fold the bias strip in half lengthwise, with the appropriate sides dealing with collectively. Press the folded edge effectively to create a pointy crease.
To affix the ends of the bias strip, overlap the uncooked ends by about 1 inch, with the folded edge extending past the uncooked edges. Align the folded edges and stitch a straight line throughout the overlapping edges, 1/4 inch from the uncooked edges.
Trim the surplus material on the seam allowance, leaving a 1/4-inch seam allowance. Press the seam allowance open and trim any extra threads. Your binding strip is now steady.
| Step | Description |
|---|---|
| 1 | Reduce material strips 2.5 inches extensive and the size of the quilt perimeter plus 10-12 inches. |
| 2 | Be part of strips collectively at a 45-degree angle with a diagonal seam. |
| 3 | Fold bias strip in half lengthwise, press, and be part of ends with a straight seam, overlapping 1 inch. |
Attaching the Binding to the Quilt
1. Put together the Binding Strips
Reduce the binding strips to the specified width. Typically, 2.5 to three inches extensive is appropriate. Be part of the binding strips along with a diagonal seam, being cautious to trim any extra material.
2. Sew the Binding to the Quilt Prime
Align the uncooked fringe of the binding with the sting of the quilt high, proper sides collectively. Use a scant 1/4-inch seam allowance and stitch throughout the quilt, leaving a 6-inch tail firstly and finish.
3. Miter the Corners
When you attain a nook, fold the binding strips at a 45-degree angle, making a mitered nook. Trim the surplus material, leaving a 1/4-inch seam allowance. Fold the binding over the mitered nook and proceed stitching.
4. Ending the Binding
a) Fold and Press the Binding: Fold the binding over the sting of the quilt, enclosing the quilt high and the earlier sew line. Press the binding flat with an iron.
b) Topstitch the Binding: Sew within the ditch alongside the inside fringe of the binding, securing it to the quilt high. Make sure that your stitches are small and even, roughly 1/8-inch aside.
c) Hand Sew the Binding: For a safer and invisible end, hand sew the binding in place. Use a blind sew or a ladder sew to stitch by the binding and the quilt high, hiding the stitches throughout the material.
d) Take away the Tail: As soon as the binding is sewn, trim the surplus tail and tuck it beneath the binding at the start line. Sew the tail down by hand to safe it.
Mitering the Corners
Exactly mitered corners create a clear {and professional} end in your quilt binding. Comply with these steps to attain good miters:
1. Mark the Quilt Edge
Use a ruler or measuring tape to mark the middle level on every fringe of the quilt, 45 levels from the nook.
2. Fold the Binding
Fold the binding strip in half lengthwise, fallacious sides collectively. Align the middle of the binding with the marked level on the quilt.
3. Pin the Binding
Pin the binding to the quilt edge, ranging from the middle and dealing in direction of the nook. Fold the corners of the binding at a 45-degree angle to kind a triangle.
4. Sew the Binding
Sew the binding near the sting of the quilt, utilizing a small sew size. If you attain the nook, depart a 1/4-inch hole earlier than stitching throughout it.
5. Fold and Safe the Miter
| Directions | Illustration |
|---|---|
| Fold the triangle of binding over the nook in order that the uncooked edges are aligned. | [Image of folding the corner] |
| Press the folded binding flat. | [Image of pressing the corner] |
| Fold the uncooked edges of the binding beneath on either side of the nook. | [Image of folding the edges under] |
| Sew the folded edges collectively, securing the miter. | [Image of stitching the miter] |
Hand-Stitching the Binding
Hand-stitching the binding is a standard and time-honored methodology for securing it to the quilt. This is a complete information that can assist you obtain an ideal hand-stitched binding:
Supplies:
- Quilt with unattached binding
- Needle and thimble
- Matching thread
Steps:
- Fold the binding over the quilt edge: Crease the binding strip in half lengthwise and unfold it. Place it across the quilt edge, aligning the uncooked edges. Fold the binding over the sting and tuck it beneath alongside the quilt again.
- Safe the binding: Utilizing a needle and thread, start hand-stitching the binding to the quilt again. Begin at one nook and use small, even stitches.
- Sew from the quilt again to entrance: Insert the needle from the quilt again, bringing it up by the folded binding. Take one other sew from the entrance, inserting the needle by the quilt and bringing it up by the binding.
- Safe the stitches: To safe every sew, deliver the needle again down by the binding and quilt again, near the primary sew. Repeat this course of alongside the whole quilt edge.
- Sew depth: The stitches needs to be deep sufficient to safe the binding firmly to the quilt again however not so deep that they present by to the quilt high.
- Binding width: The width of the binding will decide the scale of the stitches and what number of stitches per inch are required. A wider binding would require longer stitches and fewer per inch, whereas a narrower binding would require shorter stitches and extra per inch.
- Mitered corners: When binding the quilt corners, fold the binding at a 45-degree angle and miter its edges collectively. Safe the mitered nook with a number of stitches.
- End the binding: As soon as the binding is hand-stitched across the complete quilt edge, trim any extra binding and tie or weave within the thread ends to safe them.
| Binding Width | Stitches per Inch | Sew Size |
|---|---|---|
| 1/4 inch | 5-6 | 1/8 inch |
| 1/2 inch | 3-4 | 1/4 inch |
| 3/4 inch | 2-3 | 1/2 inch |
Machine-Stitching the Binding
Machine-sewing the binding is a fast and simple approach to end your quilt. Listed here are the steps:
1. Put together the binding strips
Reduce the binding strips into 2 1/2-inch-wide strips. Be part of the strips along with a diagonal seam, mitering the corners if desired.
2. Connect the binding to the quilt
Place the binding strip alongside the sting of the quilt, proper sides collectively. Pin the binding in place, beginning on the middle of 1 aspect and dealing your manner across the quilt. Machine-stitch the binding to the quilt, utilizing a 1/4-inch seam allowance.
3. Fold the binding over the sting
As soon as the binding is sewn on, fold it over the sting of the quilt and press it in place. Topstitch the binding to the quilt, utilizing a 1/8-inch seam allowance.
4. Miter the corners
If you come to a nook, miter the binding to create a neat, completed look. To do that, fold the binding over at a 45-degree angle and trim the surplus material. Fold the binding again over and press it in place. Topstitch the binding in place.
5. Ending the binding
As soon as the binding is sewn on, you may end it by hand-sewing or machine-stitching. If you’re hand-sewing the binding, use a blind sew to connect it to the quilt. If you’re machine-stitching the binding, use a 1/8-inch seam allowance.
6. Desk of Machine Binding Ideas
| Tip | Description |
|---|---|
| Use a strolling foot | This can assist to stop the material from shifting as you sew. |
| Sew within the ditch | This can create a much less seen seam. |
| Use a small sew size | This can assist to stop the binding from puckering. |
| Trim the surplus material near the stitching | This can assist to create a neat, completed look. |
| Press the binding as you go | This can assist to maintain the binding in place and stop it from puckering. |
7. Troubleshooting Machine Binding Issues
If you’re having issues with machine binding, listed here are a number of troubleshooting suggestions:
- If the binding is puckering, attempt utilizing a smaller sew size.
- If the binding just isn’t staying in place, attempt urgent it as you go.
- If the binding is simply too free, attempt utilizing a wider seam allowance.
- If the binding is simply too tight, attempt utilizing a narrower seam allowance.
- If the binding just isn’t mitering accurately, attempt trimming the surplus material nearer to the stitching.
Ending Touches: Urgent and Prime-Stitching
Prime-Stitching the Binding
As soon as your binding is sewn in place, it is time to give it an expert look with top-stitching. This step provides an ornamental contact whereas making certain the binding stays securely in place.
Supplies:
– Stitching machine
– Matching thread
– Non-obligatory: Presser foot with information
Steps:
1. Set your stitching machine to an ornamental sew or a straight sew with a sew size of 2-2.5mm.
2. Fold the binding over by a scant 1/4 inch (6mm) to the again of the quilt.
3. Align the folded edge with the ditch between the binding and the backing material.
4. Beginning on the middle of 1 aspect, slowly sew from one nook to the opposite.
5. Return to the middle and sew the opposite aspect in the identical method.
6. Take away the quilt from the machine and clip any free threads.
7. If desired, use a presser foot with a information to make sure even spacing between stitches.
8. To create a extra elaborate look, think about using an ornamental thread or a contrasting coloration thread for top-stitching. This may add a private contact and improve the general look of your quilt.
| Step | Description |
|---|---|
| 1 | Set stitching machine to desired sew. |
| 2 | Fold binding over to again of quilt. |
| 3 | Align folded edge with ditch between binding and backing. |
| 4 | Sew from middle to nook on one aspect. |
| 5 | Return to middle and sew different aspect. |
| 6 | Take away quilt from machine and clip threads. |
| 7 | Use presser foot with information for even spacing (elective). |
| 8 | Add private contact with ornamental thread or contrasting coloration (elective). |
Troubleshooting Widespread Binding Points
Problem: Binding Is Too Huge or Too Slim
**Trigger:** Incorrect measurement of binding strips.
**Resolution:** Recut binding strips to the proper width. For a quilt with a 1/2-inch seam allowance, the binding strips ought to measure:
| Binding Width | Binding Size |
|---|---|
| 2 1/4 inches | Quilt perimeter + 10 inches |
| 2 1/2 inches | Quilt perimeter + 12 inches |
| 3 inches | Quilt perimeter + 14 inches |
Problem: Binding Is Puckering or Rippling
**Trigger:** Binding is simply too tight or too free.
**Resolution:** Regulate the stress in your stitching machine. If the binding is puckering, loosen the stress. If the binding is rippling, tighten the stress.
Problem: Binding Is Not Mitred Evenly
**Trigger:** Inaccurate mitering or uneven strain when urgent or stitching.
**Resolution:** Observe mitering on scrap material till you get the hold of it. Guarantee even strain when urgent and stitching the mitered corners.
Problem: Binding Is Curling or Fraying
**Trigger:** Improper urgent strategies or incorrect stitching methodology.
**Resolution:** Press the binding strips flat earlier than attaching them to the quilt. Use a blind sew or a slender zigzag sew to safe the binding, making certain the stitches catch the binding and the quilt high.
Problem: Binding Is Cumbersome
**Trigger:** Extreme seam allowance or too many layers of cloth.
**Resolution:** Trim the seam allowance to 1/4 inch earlier than attaching the binding. Keep away from utilizing a number of layers of cloth, comparable to batting or different interfacing, beneath the binding.
Problem: Binding Is Free or Falling Off
**Trigger:** Inadequate securing of the binding or incorrect stitching methodology.
**Resolution:** Use a robust thread and sew the binding securely. Think about using a double-row sew for added reinforcement. Make sure the stitches catch by all layers of the binding and the quilt high.
Hand-Stitching vs. Machine-Stitching
Hand-sewing offers a extra conventional look, whereas machine-sewing is faster and simpler.
Binding Width
The binding needs to be 2 1/2″ extensive for quilts as much as 50″ sq., 3″ extensive for quilts 50″ to 90″ sq., and three 1/2″ extensive for quilts over 90″ sq..
Bias Binding vs. Straight-Grain Binding
Bias binding drapes higher and is much less prone to pucker, however straight-grain binding is less complicated to stitch.
Mitering Corners
Mitering corners offers a extra polished look. To miter a nook, fold the binding in half diagonally and press. Align the folded edge with the uncooked fringe of the quilt and stitch at a 45-degree angle.
Becoming a member of Binding Ends
To affix binding ends, overlap them by 1 1/2″ and stitch them collectively at a 45-degree angle. Trim the surplus material and press the seam open.
Attaching the Binding
Use a blind sew to connect the binding to the quilt high. Begin stitching in the midst of one aspect and work your manner across the quilt.
Ideas for Skilled-Trying Quilt Binding
Use an identical thread coloration to the quilt high.
Sew the binding near the sting of the quilt, however not so shut that the stitches present by to the highest.
Press the binding as you go to assist it lay flat.
If you’re hand-sewing the binding, use a thimble to guard your fingers.
If you’re machine-sewing the binding, use a quilting presser foot to assist feed the material by evenly.
If you’re utilizing bias binding, you should definitely stretch the binding barely as you sew it to stop puckering.
If you’re utilizing straight-grain binding, you should definitely trim the canine ears on the corners to stop bulkiness.
Mitering the corners offers a extra polished look, however it isn’t needed.
When becoming a member of binding ends, you should definitely overlap them by not less than 1 1/2″ to make sure a robust seam.
Connect the binding with a blind sew to present it an expert end.
How To Do Binding On Quilt
Quilt binding is a sort of cloth trim that’s sewn across the edges of a quilt to complete it off. It may be constituted of quite a lot of supplies, together with cotton, polyester, and silk. Binding additionally helps to guard the quilt from fraying and put on. Listed here are the steps on how one can do binding on a quilt:
- Reduce the binding strips. The width of the binding strips will range relying on the scale of your quilt. You should utilize a rotary cutter or a scissors to chop the strips.
- Sew the binding strips collectively. Sew the binding strips collectively end-to-end to create one lengthy strip.
- Connect the binding to the quilt. Begin by pinning the binding to the quilt, proper sides collectively. Sew the binding to the quilt utilizing a blind sew or a whip sew.
- Fold the binding over and stitch it down. As soon as the binding is sewn to the quilt, fold it over to the again of the quilt and stitch it down utilizing a blind sew or a whip sew.
- Trim the surplus binding. Trim any extra binding from the corners of the quilt.
Folks Additionally Ask About How To Do Binding On Quilt
How do I select the appropriate binding material?
The most effective binding material in your quilt will rely on the general fashion of the quilt. Take into account the colour, sample, and texture of the quilt material when selecting a binding material.
What’s the greatest sew to make use of for binding a quilt?
The most effective sew to make use of for binding a quilt is a blind sew or a whip sew. These stitches are each invisible and can assist to maintain the binding safe.
How do I miter the corners of a quilt binding?
To miter the corners of a quilt binding, you will want to chop the binding at a 45-degree angle. As soon as the binding is lower, fold it in half and stitch it to the quilt. Trim any extra binding from the corners.
