When the time involves take away the reverse motor in your Harley Trike, it’s important to have an understanding of the process and the required instruments. This activity could appear daunting, however it may be damaged down into manageable steps. With cautious planning and execution, you possibly can efficiently full this restore your self. On this article, we’ll information you thru the method of eradicating the reverse motor in your Harley Trike, offering you with detailed directions and ideas to make sure a clean and environment friendly restore.
Earlier than embarking on this activity, it’s essential to assemble the required instruments and supplies. You’ll need a set of wrenches, a socket set, a screwdriver, a torque wrench, and some miscellaneous objects like rags and cleaner. Moreover, it’s extremely beneficial to seek the advice of your Harley Trike’s service handbook for particular directions and security precautions. Upon getting the whole lot you want, you possibly can start the elimination course of.
Step one entails disconnecting the battery and draining the fluids from the reverse motor. It will forestall any electrical hazards or leaks throughout the elimination course of. Subsequent, take away the reverse motor mount bolts and punctiliously disconnect {the electrical} connectors. It is very important notice the place of the wires for reassembly in a while. As soon as the motor is unfastened, you possibly can raise it out of the trike. Make sure you assist the motor’s weight and keep away from damaging any surrounding elements.
Eradicating Mounting Bolts
When eradicating the mounting bolts, you should definitely use a wrench that’s the right measurement for the bolts. Don’t overtighten the bolts, as this may harm the threads. The next desk exhibits the torque specs for the mounting bolts:
| Bolt Dimension | Torque |
|---|---|
| M8 | 25 ft-lbs |
| M10 | 35 ft-lbs |
| M12 | 45 ft-lbs |
To take away the mounting bolts, observe these steps:
- Find the mounting bolts that safe the reverse motor to the transmission.
- Use a wrench to loosen the bolts.
- As soon as the bolts are unfastened, take away them by hand.
- If the bolts are troublesome to take away, you could want to make use of a penetrating oil to loosen them.
Changing Gasket and Seal
To exchange the gasket and seal, you will have the next instruments and supplies:
- New gasket and seal
- RTV sealant
- Socket set
- Screwdriver
- Razor blade
- Store towels
Comply with these steps to exchange the gasket and seal:
1. Clear the mating surfaces of the motor and transmission with a razor blade and store towels.
2. Apply a skinny bead of RTV sealant to the mating floor of the motor.
3. Place the brand new gasket on the motor and align it with the transmission.
4. Bolt the transmission to the motor.
5. Apply a skinny bead of RTV sealant to the mating floor of the transmission.
6. Place the brand new seal on the transmission and align it with the motor.
7. Insert the seal into the transmission and safe it with a circlip or snap ring.
| Step | Description |
|---|---|
| 7 | Insert the seal into the transmission and safe it with a circlip or snap ring. Seek the advice of your service handbook for particular directions on your mannequin. Make sure the seal is correctly seated and safe to forestall leaks. |
Reinstalling Reverse Motor
Step 1: Put together the Motor
Disconnect the shift and electrical connections from the reverse motor and take away the motor from the trike. Clear the motor and examine it for any harm or put on.
Step 2: Place the Motor
Place the reverse motor within the applicable location on the trike, guaranteeing that it’s aligned accurately. Safe the motor utilizing the offered bolts or brackets.
Step 3: Reconnect the Shift Linkage
Connect the shift linkage to the reverse motor, ensuring that it’s engaged and working easily.
Step 4: Reconnect the Electrical Connections
Join {the electrical} connections to the reverse motor, together with the optimistic and unfavorable cables and the shift change.
Step 5: Bleed the System
Fill the reverse motor’s fluid reservoir with the beneficial fluid and function the shift lever forwards and backwards a number of occasions to bleed the system and take away any air.
Step 6: Check Operation
Begin the trike and interact the reverse gear. Confirm that the motor rotates within the right course and that the trike strikes in reverse easily.
Step 7: Regulate the Clutch
If crucial, regulate the clutch cable to make sure that the motor engages and disengages easily.
Step 8: Detailed Inspection of the Clutch Mechanism
To make sure optimum efficiency and forestall untimely put on, examine the clutch mechanism totally:
1. Examine the clutch plates for put on and harm, changing them if crucial.
2. Look at the clutch springs for correct pressure, guaranteeing they’re sturdy sufficient to have interaction the clutch successfully.
3. Examine the clutch hub and basket for any harm or deformation, guaranteeing they’re clean and freed from burrs.
4. Regulate the clutch cable pressure to make sure correct engagement and disengagement of the clutch.
5. Make sure the clutch lever and linkage are functioning easily, offering enough clearance and journey.
Reconnecting Electrical Connections
Now that the reverse motor has been eliminated, it is time to reconnect {the electrical} connections. This can be a comparatively easy course of, but it surely’s necessary to guarantee that the connections are safe and proper. In any other case, you may harm your trike’s electrical system.
Listed below are the steps on find out how to reconnect {the electrical} connections:
- Disconnect the unfavorable battery terminal.
- Find the reverse motor relay. It is normally positioned close to the reverse motor.
- Unplug {the electrical} connector from the relay.
- Take away the 2 bolts that maintain the relay in place.
- Take away the relay from the trike.
- Join {the electrical} connector to the brand new relay.
- Mount the brand new relay in place utilizing the 2 bolts.
- Tighten the bolts securely.
- Reconnect the unfavorable battery terminal.
10. Check the reverse motor to ensure it is working correctly.
Should you’re not snug working in your trike’s electrical system, it is best to have it completed by a professional mechanic.
| Reverse Motor Pinout | Shade | Perform |
|---|---|---|
| 1 | Pink | Energy |
| 2 | Black | Floor |
| 3 | Blue | Reverse Enter |
Testing and Verification
As soon as the reverse motor has been eliminated, it is necessary to check the system to make sure it is functioning accurately. Listed below are the steps concerned in testing and verification:
1. Electrical Inspection
Examine all electrical connections to ensure they’re safe and freed from corrosion. Examine the wiring harness for any harm or unfastened wires.
2. Brake System Examine
Make sure that the brake system is working correctly by making use of the brakes and checking for any leaks or irregular noises. The brakes ought to interact easily and successfully.
3. Reverse Gear Engagement
With the transmission in impartial, interact the reverse gear by urgent the reverse button. The trike ought to transfer easily in reverse with out hesitation or grinding noises.
4. Ahead Gear Engagement
Shift the transmission into ahead gear and confirm that the trike strikes ahead with none points. Examine for any uncommon vibrations or noises.
5. Reverse Gentle Perform
Affirm that the reverse lights illuminate when the reverse gear is engaged. This means that {the electrical} system is functioning accurately.
6. Impartial Place
Return the transmission to impartial and guarantee that the trike stays stationary with no unintended motion.
7. Throttle Response
Check the engine’s throttle response whereas in reverse. The trike ought to speed up easily and steadily with none hesitation or stalling.
8. Load Testing
To check the system below load, apply the brakes whereas in reverse gear. The trike ought to have the ability to maintain its place with out rolling backward.
9. Prolonged Testing
Experience the trike in varied situations to additional consider the efficiency of the brand new system. Search for any indicators of overheating, vibration, or irregular habits.
10. Troubleshooting
If any points come up throughout testing, seek the advice of the service handbook or a professional technician to diagnose and resolve the issue. The next desk gives a troubleshooting information for widespread points:
| Difficulty | Potential Trigger |
|---|---|
| Trike doesn’t transfer in reverse | – Defective reverse motor – Electrical connection points – Transmission downside |
| Reverse gear grinds | – Worn or broken gears – Improper adjustment |
| Reverse lights not working | – Blown fuse – Defective change – Electrical wiring challenge |
How To Take away Reverse Motor On Harley Trike
To take away the reverse motor on a Harley trike, you will have the next instruments:
- Socket wrench
- Wrench
- Flathead screwdriver
- Phillips head screwdriver
- Security glasses
- Gloves
1. Disconnect the unfavorable battery terminal.
2. Take away the seat.
3. Take away the battery field.
4. Take away the exhaust pipe.
5. Take away the rear wheel.
6. Unbolt the reverse motor from the transmission.
7. Take away the reverse motor.
Folks Additionally Ask
How a lot does it value to take away a reverse motor on a Harley trike?
The price to take away a reverse motor on a Harley trike will fluctuate relying on the store you are taking it to. Nevertheless, you possibly can count on to pay round $200-$400 for the labor.
How lengthy does it take to take away a reverse motor on a Harley trike?
It is going to usually take a mechanic round 2-4 hours to take away a reverse motor on a Harley trike.
Can I take away the reverse motor on a Harley trike myself?
Sure, it’s potential to take away the reverse motor on a Harley trike your self. Nevertheless, it’s endorsed that you just solely try this in case you are snug engaged on bikes. If you’re unsure find out how to do it, it’s best to take your trike to a mechanic.
