5 Ways to Boot HP EliteBook into Safe Mode

Protected mode is a diagnostic mode of Home windows that begins your pc with a minimal set of drivers and packages. This may be useful for troubleshooting issues along with your pc, similar to malware infections or driver conflicts. Booting into protected mode can be useful if it is advisable make adjustments to your pc’s settings that may usually be prevented by malware or different software program.

As well into protected mode on an HP Elitebook, you will have to press the F11 key repeatedly in the course of the boot course of. It will open the Boot Menu, the place you possibly can choose the Protected Mode possibility. After you have chosen Protected Mode, press the Enter key in addition into protected mode.

You can too boot into protected mode utilizing the System Configuration utility. To do that, press the Home windows key + R to open the Run dialog field. Then, kind msconfig into the Run dialog field and press the Enter key. It will open the System Configuration utility. Within the System Configuration utility, click on on the Boot tab after which choose the Protected Boot possibility. Lastly, click on on the Apply button after which the OK button to save lots of your adjustments and reboot your pc into protected mode.

As soon as you’re in protected mode, you possibly can troubleshoot the issues along with your pc. You can too make adjustments to your pc’s settings that may usually be prevented by malware or different software program. If you find yourself completed troubleshooting or making adjustments to your pc, you possibly can reboot your pc to exit protected mode.

Protected Mode Overview

What’s Protected Mode?

Protected mode is a diagnostic mode that begins Home windows with a minimal set of drivers and packages. This mode lets you troubleshoot and resolve points which may be attributable to conflicts between software program, drivers, or {hardware}. Protected mode could be significantly helpful when your pc is experiencing issues similar to blue screens, system freezes, or different sudden conduct.

Advantages of Utilizing Protected Mode

There are a number of advantages to utilizing protected mode for troubleshooting:

It disables non-essential drivers and packages, making it simpler to determine the supply of issues.
It lets you make adjustments to your system, similar to updating drivers or eradicating software program, with out the interference of different packages.
It could make it easier to restore your pc to a secure state, even when it isn’t capable of boot usually.

When to Use Protected Mode

Protected mode is beneficial within the following conditions:

When your pc is experiencing blue screens or different system errors.
Whenever you suspect a driver or software program battle is inflicting issues.
When it is advisable make adjustments to your system however different packages are interfering.
Whenever you need to restore your pc to a secure state.

Accessing Protected Mode through System Configuration

To entry the System Configuration utility, often known as msconfig, observe these steps:

1. Concurrently press the Home windows key and the R key to open the Run dialog field.
2. Sort “msconfig” with out the quotes into the textual content area.
3. Click on the OK button or press the Enter key to launch System Configuration.

As soon as within the System Configuration utility, in addition into Protected Mode with minimal drivers and providers, observe these steps:

Step	Motion
1.	Navigate to the Boot tab inside the System Configuration utility.
2.	Search for the Protected boot possibility and verify the field subsequent to it.
3.	Optionally, you possibly can select to allow networking in Protected Mode by checking the field for Community.
4.	Be certain that the Timeout worth is ready to 30 seconds or much less. This provides you with a small time window to alter the boot choices earlier than they’re utilized.
5.	Click on on the Apply button to save lots of the adjustments.
6.	Click on on the OK button to shut the System Configuration utility.

Your pc will probably be prompted to restart instantly. After restarting, your pc will boot into Protected Mode with the chosen choices.

Troubleshooting Drivers in Protected Mode

In Protected Mode, solely the important drivers and packages are loaded, making it excellent for troubleshooting driver points.

1. Begin your HP EliteBook in Protected Mode by following the steps within the earlier part.

2. As soon as in Protected Mode, open Gadget Supervisor by urgent Home windows Key + X and deciding on Gadget Supervisor.

3. Broaden the classes in Gadget Supervisor to determine any drivers with exclamation marks or error messages.

4. To troubleshoot these drivers:

a) Proper-click on the problematic driver and choose “Properties.”

b) Within the Properties window, navigate to the “Driver” tab.

c) Click on on the “Replace Driver” button to routinely seek for and set up the newest driver software program.

d) If an replace shouldn’t be accessible, click on on the “Roll Again Driver” button to revert to the earlier model of the motive force.

e) If neither of those choices resolves the difficulty, click on on the “Uninstall Gadget” button to take away the motive force out of your system. Chances are you’ll have to restart your pc after uninstalling the motive force.

5. After you have addressed the problematic drivers, restart your HP EliteBook in regular mode to see if the difficulty is resolved.

Disabling Startup Packages in Protected Mode

Figuring out and disabling startup packages can stop them from working whenever you enter Protected Mode. Here is a step-by-step information:

1. Open Process Supervisor

Press “Ctrl + Shift + Esc” to launch Process Supervisor.

2. Navigate to the Startup Tab

Click on on the “Startup” tab on the prime of Process Supervisor.

3. Kind Packages by Standing

Click on on the “Standing” column header to kind packages by their startup standing.

4. Determine Non-Important Packages

Look at the checklist of packages and determine these that aren’t important to your system. These might embrace bloatware or packages that you simply not often use.

5. Disable Non-Important Packages

Proper-click on the non-essential packages and choose “Disable” from the context menu. You can too use the slider button subsequent to this system identify to toggle it off.

Program Identify	Standing	Motion
Instance Software program #1	Enabled	Disable
Instance Software program #2	Disabled	–
Instance Software program #3	Enabled	Disable

6. Exit Process Supervisor

After you have disabled all non-essential packages, shut Process Supervisor.

Accessing Protected Mode

As well into Protected Mode on an HP EliteBook, observe these steps:

Activate or restart your pc.
Instantly begin urgent the F11 key repeatedly till the Boot Choices menu seems.
Choose the “Troubleshoot” possibility.
Choose “Superior choices.”
Navigate to “Startup Settings.”
Click on “Restart.”
After the restart, you will notice a number of boot choices on the display screen.
Choose the choice for “Protected Mode” by urgent the corresponding quantity key or operate key.

Operating System Restore in Protected Mode

When you’re in Protected Mode, you possibly can proceed with working a System Restore:

Open the Begin menu and seek for “System Restore.”
Choose “Create a restore level” and click on on the “System Restore” button.
Within the System Restore window, choose the restore level that you simply need to return your system to.
Click on on the “Scan for affected packages” button to see what packages and information will probably be affected by the restore.
Click on on the “Subsequent” button after which “End” to start out the System Restore course of.

Extra Notes

In case you are unable in addition into Protected Mode utilizing the F11 key, it’s possible you’ll want to make use of a special methodology, similar to utilizing the Home windows Restoration Surroundings (WinRE) or a bootable USB drive.

Scanning for Malware in Protected Mode

In Protected Mode, your pc will solely load essentially the most important drivers and software program, which can assist to isolate and take away malware infections. To scan for malware in Protected Mode, observe these steps:

1. Begin your pc in Protected Mode

Restart your pc and press the F8 key repeatedly in the course of the startup course of. It will open the Superior Boot Choices menu. Use the arrow keys to pick out “Protected Mode with Networking” and press Enter.

2. Replace your antivirus software program

As soon as you’re in Protected Mode, open your antivirus software program and replace it to the newest model. It will make sure that your software program has essentially the most up-to-date definitions for malware detection.

3. Run a full system scan

Click on the “Scan” button in your antivirus software program to start out a full system scan. This scan will verify the entire information and directories in your pc for malware.

4. Delete any contaminated information

As soon as the scan is full, your antivirus software program will show a listing of any contaminated information that it has discovered. Click on the “Delete” button to take away these information out of your pc.

5. Restart your pc

After you have deleted the entire contaminated information, restart your pc in regular mode. Your pc ought to now be freed from malware.

6. Reinstall your antivirus software program

If you happen to had been unable to take away the malware an infection utilizing Protected Mode, it’s possible you’ll have to reinstall your antivirus software program. It will guarantee that you’ve got a clear set up of your antivirus software program and that it’s correctly configured to guard your pc.

7. Contact a pc technician

In case you are nonetheless having bother eradicating the malware an infection, it is best to contact a pc technician. A technician can assist you to determine and take away the an infection and restore your pc to regular performance.

Resetting Home windows Password in Protected Mode

Accessing Protected Mode

Energy off your HP Elitebook.
Energy it again on by urgent the facility button.
Instantly begin urgent the F11 key repeatedly till the Boot Menu seems.
Choose “Troubleshoot” and press Enter.
Select “Superior Choices” and press Enter.
Choose “Startup Settings” and press Enter.
Click on the “Restart” button.
After the pc restarts, a listing of startup choices will probably be displayed.

Resetting the Password

Choose the “Protected Mode” possibility by urgent the F4 key.
Look forward to the system in addition into Protected Mode.
Click on on the “Begin” button.
Sort “cmd” within the search field and press Enter.
Within the command immediate window, kind the next command: internet person
Change “” along with your username.
Change “” along with your desired new password.
Press Enter.

Your password will now be reset. Now you can restart your pc and log in along with your new password.

Resolving Boot Issues with Protected Mode

1. Restart the Laptop

Maintain down the facility button till the pc turns off. Then, press the facility button once more to restart the pc.

2. Press the F8 Key

As quickly as the pc begins in addition, repeatedly press the F8 key. It will open the Superior Boot Choices menu.

3. Choose Protected Mode

Use the arrow keys to pick out “Protected Mode” from the menu. Then, press Enter.

4. Enter Credentials

If prompted, enter your person identify and password.

5. Troubleshoot the Downside

Protected Mode begins Home windows with a restricted set of drivers and packages. This can assist you determine and troubleshoot boot issues.

6. Exit Protected Mode

To exit Protected Mode, merely restart the pc. The pc will boot usually.

7. Troubleshoot Boot Issues

In case you are having bother booting into Protected Mode, strive the next steps:

Make it possible for the keyboard is working correctly.
Strive utilizing a special keyboard.
Strive booting from a special onerous drive or USB drive.
Contact HP help for help.

8. Extra Data

Protected Mode is a diagnostic mode that may make it easier to troubleshoot boot issues. Protected Mode begins Home windows with a restricted set of drivers and packages. This can assist you determine and troubleshoot boot issues.

9. Troubleshooting Ideas

Listed below are some extra suggestions for troubleshooting boot issues:

Downside	Resolution
The pc doesn’t boot in any respect	Test the facility provide and guarantee that the pc is correctly plugged in.
The pc boots to a black display screen	Strive restarting the pc. If the issue persists, strive booting into Protected Mode.
The pc boots to a blue display screen	The blue display screen error message accommodates data that may make it easier to determine the issue.

The best way to Boot Into Protected Mode

Protected mode is a diagnostic mode of Home windows that begins with solely important information and drivers, permitting you to troubleshoot issues with out interference from third-party software program.

As well into protected mode on an HP EliteBook:

Flip off your pc.
Flip in your pc and instantly begin urgent the “F11” key repeatedly till the HP Startup Menu seems.
Use the arrow keys to pick out “Troubleshoot” and press “Enter.”
Choose “Superior choices” and press “Enter.”
Choose “Startup Settings” and press “Enter.”
Click on the “Restart” button.
Your pc will restart and you will notice a listing of startup choices.
Press “4” or “F4” to pick out “Protected Mode.”
Your pc will boot into protected mode.
Troubleshooting in Protected Mode:

a.

Begin by making an attempt to run this system or utility that was inflicting issues.

b.

If the issue nonetheless happens, disable any lately put in software program or drivers.

c.

Scan your pc for malware or viruses.

d.

If the issue persists, strive updating your drivers or utilizing System Restore to revert your system to a earlier state.

Exiting Protected Mode

To exit protected mode, merely restart your pc usually. Your pc will boot into common mode by default.

The best way to Boot HP EliteBook into Protected Mode

In case you are experiencing issues along with your HP EliteBook, booting into protected mode can assist troubleshoot and resolve the problems. Protected mode begins your pc with solely the essential drivers and providers, which can assist determine and repair points which may be attributable to third-party software program or drivers.

As well an HP EliteBook into protected mode:

1. Activate or restart your pc.
2. As quickly because the HP emblem seems, press and maintain the F8 key repeatedly till the Startup Menu opens.
3. Use the arrow keys to pick out Protected Mode and press Enter.
4. Home windows will now boot into Protected Mode.

Troubleshooting Widespread Points

My pc will not boot into Protected Mode

In case your pc will not boot into Protected Mode, strive the next:

* Be sure you are urgent the F8 key repeatedly as quickly because the HP emblem seems.
* Strive utilizing a special keyboard.
* Reset the BIOS to default settings.

I am having issues in Protected Mode

In case you are experiencing issues whereas in Protected Mode, strive the next:

* Replace your drivers.
* Scan for malware.
* Carry out a system restore.

Individuals Additionally Ask

How do I restart my HP EliteBook in Protected Mode?

To restart your HP EliteBook in Protected Mode, observe the steps outlined above. As soon as you’re in Protected Mode, click on the Begin button and choose Restart. Your pc will restart and proceed working in Protected Mode.

How do I exit Protected Mode on my HP EliteBook?

To exit Protected Mode in your HP EliteBook, merely restart your pc. Your pc will routinely boot into regular mode after the restart.