9 Simple Steps To Remove Ring Doorbell

Ring doorbells are an effective way to regulate your property and deter burglars, however there might come a time when it is advisable to take away it. Whether or not you are transferring, changing it with a brand new mannequin, or just want to wash it, we’ll present a complete information on the right way to take Ring doorbell off effortlessly.

Earlier than you start, it is important to collect the mandatory instruments and security gear. You will want a screwdriver, a pair of pliers (elective), and a step stool or ladder for reaching greater installations. Moreover, guarantee you have got security glasses and gloves to guard your self from potential hazards whereas working with electrical elements.

Upon getting your instruments prepared, find the mounting bracket of the Ring doorbell. Usually, it will be hooked up to the wall or door body utilizing screws or bolts. Use the screwdriver to unscrew these fasteners fastidiously, supporting the doorbell with one hand to stop it from falling. Disconnect {the electrical} wires by gently pulling them aside. Be sure that to cap off the uncovered wires utilizing electrical tape for security. Lastly, carry the Ring doorbell off the mounting bracket and retailer it in a safe location.

Eradicating the Faceplate

Earlier than you’ll be able to take away the doorbell from its mount, it is advisable to take away the faceplate. This is the right way to do it:

Find the small screw on the backside of the faceplate. Use a screwdriver to loosen the screw.

As soon as the screw is unfastened, gently pull the faceplate away from the doorbell. Watch out to not pull too laborious, because the wires connecting the faceplate to the doorbell are delicate.

As soon as the faceplate is eliminated, you will note the 2 wires that join it to the doorbell. Disconnect the wires by gently pulling them aside.

Now that the faceplate is eliminated, you’ll be able to transfer on to eradicating the doorbell from its mount.
Warning: Earlier than eradicating the faceplate, make sure that to energy down the doorbell on the breaker. Failure to take action may end in electrical shock.

Tip: In case you are having hassle eradicating the faceplate, you’ll be able to attempt utilizing a plastic spudger or a small flathead screwdriver to softly pry it off.

Instruments You will Want:
Phillips head screwdriver
Plastic spudger or small flathead screwdriver (elective)

Disconnecting the Wires

Earlier than disconnecting the wires, it is necessary to make sure the Ring Doorbell is powered off and disconnected from the ability supply. Comply with these steps to soundly take away the doorbell:

Step 1: Take away the protection screw

Find the one screw on the underside of the Ring Doorbell. Use a Phillips head screwdriver to take away the screw.

Step 2: Gently pull the unit in the direction of you

As soon as the screw is eliminated, gently grasp the underside of the Ring Doorbell and pull it in the direction of you. It ought to simply come off the mounting bracket.

Step 3: Disconnect the wires

The Ring Doorbell has two wires: purple and black. To disconnect the wires, comply with these steps:

Wire Colour

Steps

Purple

Gently press the tab on the connector and pull the wire straight out.

Black

Repeat the method to disconnect the black wire.

Step 4: Reattach the protection screw

As soon as the wires are disconnected, reattach the protection screw to the underside of the Ring Doorbell. This can safe the unit and stop any unintended detachment.

Unscrewing the Mount

To unscrew the mount, you will want a Phillips #2 screwdriver. First, find the 2 screws which can be holding the mount in place. They’re usually situated on the underside of the mount. Upon getting discovered the screws, merely use the screwdriver to unscrew them. Watch out to not overtighten the screws, as this might injury the mount or the doorbell.

As soon as the screws are unfastened, you’ll be able to fastidiously pull the mount away from the wall. The doorbell ought to now be free and you may take away it from the mount.

Listed below are some extra suggestions for unscrewing the mount:

If the screws are significantly tight, you could want to make use of a pair of pliers to loosen them.
Watch out to not drop the doorbell when you’re eradicating it from the mount.
In case you are having any hassle unscrewing the mount, you’ll be able to contact Ring buyer help for help.

Eradicating the Battery (if relevant)

Some Ring doorbells require a battery for operation, whereas others are powered by a wired connection. In case your doorbell makes use of a battery, you will want to take away it earlier than continuing to the subsequent steps.

Find the battery launch button, which is normally situated on the underside or again of the doorbell.
Press and maintain the discharge button whereas sliding the battery out of its compartment.
Eliminate the previous battery correctly and insert a brand new one into the compartment, guaranteeing correct polarity.
Slide the battery again into place and launch the discharge button.

Detaching the Speaker

Step 1: Take away the Safety Screw

Find the safety screw on the underside of the doorbell. Use a screwdriver to take away the screw and set it apart.

Step 2: Unclip the Speaker

Fastidiously carry the underside of the speaker housing away from the bottom of the doorbell. There are spring-loaded clips holding it in place. Use a small screwdriver or pry device to softly launch the clips.

Step 3: Disconnect the Speaker Wire

Find the speaker wire linked to the bottom of the doorbell. Gently pull the wire straight as much as detach it. Keep away from pulling on the wires themselves, as they are often fragile.

Step 4: Take away the Speaker Housing

Utilizing the pry device, fastidiously separate the speaker housing from the bottom of the doorbell. The housing could also be barely adhered, so apply mild drive.

Step 5: Unscrew the Speaker

Contained in the housing, find the 2 screws holding the speaker in place. Unscrew them and gently carry the speaker out.

Step 6: Disconnect the Speaker Cable (Wired Doorbells Solely)

For wired doorbells, an extra step is required.

For Doorbells with a Fast Launch Cable	For Doorbells with a Screw Terminal Cable
Find the speaker cable and squeeze the discharge tab to disconnect it.	Find the screw terminal and loosen the screws to disconnect the cable.

Taking Aside the Housing

The Ring Doorbell housing consists of a entrance plate and a again plate. To disassemble the housing and entry the doorbell’s inside elements:

Find the discharge button on the entrance plate, which is usually on the aspect or backside.
Press and maintain the discharge button whereas gently pulling the entrance plate in the direction of you.
Unclip the entrance plate from the rear plate.
As soon as the entrance plate is eliminated, you will have entry to the doorbell’s wires and mounting screws.
Disconnect the doorbell wires by gently pulling them out of the terminals.
Unscrew the mounting screws to detach the doorbell from the mounting bracket.
Fastidiously carry the doorbell away from the mounting bracket.

Instrument	Description
Phillips screwdriver	For eradicating the mounting screws
Torx screwdriver	For eradicating the safety screws (in some fashions)
Plastic opening device	For prying open the housing (elective)

Changing the Battery or Wiring (if mandatory)

It is necessary to make sure that your Ring Doorbell has enough energy to operate correctly. If the battery wants changing or the wiring requires consideration, comply with these steps:

Checking Battery Life

To verify the battery degree, open the Ring app, faucet the “Gadgets” tab and choose your doorbell. The battery icon will point out the present energy standing.

Changing the Battery

To exchange the battery, find the 2 screws beneath the doorbell and take away them. Gently pull the doorbell off the mounting plate, expose the battery, and swap it with a brand new one. Reattach the doorbell to the plate and safe it with the screws.

Connecting to Energy

In case you desire a wired connection, an electrician can help with putting in a transformer and connecting the doorbell to your property’s electrical system. This can present steady energy with out the necessity for battery replacements.

Wiring Specs

Wire Colour	Goal
Purple	Energy
White or Black	Impartial
Inexperienced	Floor

Comply with the directions included along with your doorbell for particular wiring particulars.

Reinstalling the Ring Doorbell

Upon getting eliminated the Ring Doorbell from its mount, you’ll be able to reinstall it by following these steps:

1. Insert the included mounting bracket into the again of the Ring Doorbell.

2. Place the Ring Doorbell on the mounting bracket and tighten the screws.

3. Determine the place you need to mount the Ring Doorbell on the wall. Use the included screws to safe the mounting bracket to the wall.

4. Slide the Ring Doorbell onto the mounting bracket and tighten the screw.

5. Join the wires to the terminals on the again of the Ring Doorbell. The purple wire connects to the terminal labeled “R,” and the black wire connects to the terminal labeled “C.”

6. Insert the battery into the Ring Doorbell.

7. Check the Ring Doorbell to ensure it’s working correctly.

8. Obtain the Ring app in your smartphone and create an account.

9. Comply with the directions within the app to attach your Ring Doorbell to your Wi-Fi community, full the setup course of, and entry reside footage and different options.

Testing the Ring Doorbell

Earlier than eradicating your Ring Doorbell, it is important to check it to make sure it is functioning appropriately. Listed below are the steps to comply with:

1. Test the Energy

Confirm that the Ring Doorbell is receiving energy by urgent the entrance button. If the sunshine ring flashes and also you hear a chime, the doorbell is powered.

2. Check the Connectivity

Open the Ring app in your smartphone. Choose your Ring Doorbell from the record of gadgets. If the app connects and exhibits a reside view from the doorbell’s digital camera, the connectivity is established.

3. Check the Movement Detection

Wave your hand in entrance of the doorbell or stroll previous it. If the doorbell detects the movement and sends a notification to your telephone, the movement detection is working.

4. Check the Chime

You probably have a Ring Chime linked to your doorbell, press the button on the entrance of the doorbell and hear for the chime at your chime machine.

5. Check the Evening Imaginative and prescient

At night time, cowl the doorbell’s lens along with your hand and see if the night time imaginative and prescient activates. You will note a black and white picture within the Ring app.

6. Check the Two-Method Discuss

Press the microphone icon within the Ring app and communicate into your telephone’s microphone. You need to hear your voice coming from the doorbell’s speaker.

7. Check the Stay View

Open the Ring app and faucet “Stay View” to entry a real-time video feed from the doorbell’s digital camera.

8. Check the Recording

You probably have a Ring Defend subscription, set off an occasion (e.g., movement detection) and verify the Ring app for recorded footage.

9. Check the Alerts

Arrange movement detection and chime alerts within the Ring app. Set off an occasion and verify if you happen to obtain notifications in your telephone and electronic mail.

10. [Additional Testing for Wired Doorbells]

For wired doorbells:

Check	Description
Take away energy from the doorbell	Flip off the circuit breaker or take away the fuse that powers the doorbell.
Disconnect the wires	Fastidiously detach the wires from the terminals on the again of the doorbell.
Reconnect the wires	Reconnect the wires to the right terminals on the again of the doorbell.
Restore energy to the doorbell	Activate the circuit breaker or change the fuse to revive energy.
Check the doorbell	Press the entrance button on the doorbell and confirm that it’s functioning appropriately.

Easy methods to Take Ring Doorbell Off

There are a number of the explanation why you could must take your Ring doorbell off. Possibly you are transferring, or possibly you are simply having some hassle with it. Regardless of the cause, listed below are the steps on the right way to take your Ring doorbell off:

Flip off the ability to your Ring doorbell on the breaker.
Take away the 2 screws which can be holding the faceplate on.
Gently pull the faceplate off of the wall.
Disconnect the wires from the again of the doorbell.
Take away the doorbell from the wall.

Upon getting eliminated your Ring doorbell, you’ll be able to retailer it in a secure place till you want it once more.

Individuals Additionally Ask

How do I reset my Ring doorbell?

To reset your Ring doorbell, press and maintain the orange button on the again of the machine for 10 seconds. The doorbell will then reset and you will want to set it up once more.

How do I modify the battery in my Ring doorbell?

To alter the battery in your Ring doorbell, take away the 2 screws which can be holding the faceplate on. Then, gently pull the faceplate off of the wall. The battery is situated on the again of the doorbell. Disconnect the wires from the battery after which take away the battery. Insert the brand new battery and reconnect the wires. Lastly, put the faceplate again on and tighten the screws.

How do I troubleshoot my Ring doorbell?

In case you are having hassle along with your Ring doorbell, there are some things you’ll be able to attempt to troubleshoot the problem. First, verify to guarantee that the doorbell is correctly linked to your Wi-Fi community. If the doorbell is just not linked to Wi-Fi, it will be unable to operate correctly. You can too attempt restarting your doorbell by urgent and holding the orange button on the again of the machine for 10 seconds. If the doorbell remains to be not working correctly, you could must contact Ring help for additional help.