Canvas assignments are a good way to interact college students with studying supplies and actions. As an teacher, you may create quite a lot of assignments, similar to quizzes, discussions, and essays. Nonetheless, it may be troublesome to maintain monitor of all of the submissions out of your college students. That’s the place the TurnItIn function is available in. TurnItIn is a plagiarism detection service that means that you can verify your college students’ submissions for originality. This could be a worthwhile software for making certain that your college students are finishing their very own work.
To require TurnItIn for an task, you may observe the steps under:
1. Create a brand new task in your Canvas course.
2. Choose the “TurnItIn” tab within the task settings.
3. Choose the “Allow TurnItIn” checkbox.
4. Select the specified TurnItIn choices.
5. Save and publish the task.
After getting enabled TurnItIn for an task, your college students might be required to submit their work by means of TurnItIn. As soon as they submit their work, TurnItIn will robotically scan it for plagiarism. You’ll be able to then view the TurnItIn report back to see if any plagiarism was detected. TurnItIn could be a worthwhile software for making certain the originality of your college students’ work. It might show you how to to establish and stop plagiarism, which may result in improved scholar studying.
Navigating Canvas Task Settings
To entry the task settings in Canvas, navigate to the course you wish to edit and click on on the “Assignments” tab within the course navigation menu. This can show a listing of all assignments within the course.
Click on on the title of the task you wish to edit. This can open the task’s settings web page, which is split into a number of sections:
Common settings: This part incorporates fundamental details about the task, similar to its title, description, due date, and level worth.
Submission settings: This part controls how college students submit their assignments. You’ll be able to select to permit college students to submit textual content, recordsdata, or each. It’s also possible to set a most file measurement for submissions.
Grading settings: This part means that you can management how the task is graded. You’ll be able to select to make use of a rubric, factors, or a mixture of each. It’s also possible to set the grading scale for the task.
Suggestions settings: This part controls how college students obtain suggestions on their assignments. You’ll be able to select to supply suggestions within the type of feedback, rubrics, or each. It’s also possible to set the due date for suggestions.
Extra settings: This part incorporates quite a lot of extra settings, similar to the flexibility to permit college students to submit late assignments, the flexibility to cover the task from college students, and the flexibility so as to add a dialogue thread to the task.
Enabling the TurnItIn Button
To allow the TurnItIn button in Canvas, you will want to make sure that your establishment has a TurnItIn license and that the TurnItIn integration is configured in your Canvas occasion. Here is a step-by-step information:
1. Configure TurnItIn Settings
- Within the Canvas dashboard, click on on “Settings” within the left-hand menu.
- Click on on “TurnItIn LTI Instruments” beneath the “Apps” tab.
- Be sure that the “TurnItIn LTI Instruments” swap is enabled.
2. Assign TurnItIn to Assignments
- Create or open an current task.
- Within the “Task Settings” tab, beneath the “Submission Kind” part, choose “Turnitin LTI Task” from the dropdown menu.
- Configure TurnItIn settings, such because the similarity threshold, allowed file varieties, and choices for excluding particular sources.
Specifying Similarity Settings
| Similarity Setting | Description |
|—|—|
| Similarity Report | Reveals the proportion of textual content that matches different sources. |
| Similarity Index | Signifies how related the submission is to different sources, with a worth between 0% (no similarity) and 100% (full similarity). |
| Similarity Rating | A weighted common of the Similarity Index and the Grammatical Similarity Index. |
3. Publish and Monitor Assignments
- Click on on “Save & Publish” to make the task reside.
- College students will now be capable of submit their assignments by means of the TurnItIn button within the task web page.
- Instructors can view TurnItIn experiences by clicking on the “TurnItIn Originality Report” hyperlink within the task web page.
Setting Up TurnItIn Integration
To seamlessly combine Turnitin into your Canvas assignments, observe these detailed steps:
1. Allow the Turnitin App
Navigate to the Canvas settings web page and choose “Apps”. Find “Turnitin” and click on “Allow”.
2. Create a Turnitin Account
If you have not already, create a Turnitin account by visiting their web site and registering as an teacher. After getting an account, log in to Canvas and join your Turnitin account.
3. Configure Task Settings
When creating an task, choose the “Turnitin” tab and allow the combination. You’ll be able to customise the next settings:
| Setting | Rationalization |
|---|---|
| Submission Kind | Select between “College students undergo Turnitin” or “College students undergo Canvas solely.” |
| Originality Report | Generate similarity experiences to detect potential plagiarism. Choose the specified stage (Low, Medium, Excessive). |
| Reference Matching | Exclude particular sources from the originality report, similar to reference supplies or web sites. |
| Due Date | Set a due date for the Turnitin submission. Late submissions might be penalized accordingly. |
| Grading Rubric | Create a grading rubric to evaluate scholar submissions, together with standards for originality, writing high quality, and analysis. |
Extra options that improve the Turnitin integration with Canvas embrace the flexibility to supply suggestions and feedback straight on the submitted paperwork, in addition to arrange peer evaluate and self-assessment choices. By following these steps and customizing the settings to fulfill your particular wants, you may successfully combine Turnitin into your Canvas assignments and create a extra environment friendly and efficient evaluation course of.
Verifying TurnItIn Connection
To make sure that TurnItIn is correctly linked to your Canvas course, observe these steps:
1. Entry Canvas Course Settings
Navigate to the Canvas course the place you want to confirm the TurnItIn connection. Click on on “Settings” from the course navigation menu.
2. Find TurnItIn Settings
Below the “Apps” tab, scroll down and find the “TurnItIn” app. Click on on the “Edit” button subsequent to it.
3. Test Connection Standing
The “TurnItIn” settings web page will show the connection standing. If the connection is lively, you will note a message stating “You might be at the moment linked to TurnItIn” and the “Lively” standing indicator.
4. Troubleshooting Connection Points
If the connection is inactive, you could encounter the next difficulty:
| Problem | Troubleshooting |
|---|---|
| Invalid API Key | Contact your system administrator or TurnItIn help to acquire a legitimate API key. |
| Incorrect LTI Configuration | Confirm that the LTI software settings in TurnItIn match these supplied by Canvas. |
| Community Connectivity Issues | Test your web connection and make sure that each Canvas and TurnItIn are accessible. |
| Firewall or Proxy Points | Contact your IT division to confirm that the required ports are open for communication between Canvas and TurnItIn. |
As soon as the problem is resolved, click on on the “Save” button to reconnect TurnItIn to your Canvas course.
Configuring TurnItIn Submission Choices
1. Allow Turnitin: Within the “Task Settings” web page, beneath the “Turnitin” tab, toggle “Allow Turnitin” to “Sure.”
2. Originality Test: Set the proportion threshold for similarity detection. Turnitin will flag submissions exceeding this threshold for evaluate.
3. Nameless Marking: Select whether or not scholar names and profile footage needs to be seen to instructors throughout grading.
4. Grading Choices: Specify whether or not scholar submissions may be manually graded, graded utilizing rubrics, or each. Turnitin additionally permits for peer assessments.
5. Submission Choices and Report Settings: These choices supply granular management over Turnitin’s habits throughout submission and report era:
Specifying TurnItIn Originality Thresholds
The TurnItIn originality threshold function lets you set the allowable proportion of similarity between a scholar’s submission and different sources. Submissions exceeding this threshold might be flagged for potential plagiarism.
To set the originality threshold:
- Within the task settings, choose the “TurnItIn” tab.
- Scroll right down to the “Originality Test” part.
- Enter the specified originality threshold (as a proportion) within the “Similarity Threshold” subject.
- Optionally, you may customise the next settings:
- Exclude bibliographic references: Exclude references from the similarity verify.
- Exclude quoted textual content: Exclude quoted textual content from the similarity verify.
- Exclude small matches: Ignore similarity matches under a sure phrase rely (e.g., 10 phrases).
- Choose “Save” to use the adjustments.
Superior Similarity Choices
The next extra settings permit for fine-tuning the originality threshold:
| Setting | Description |
|---|---|
| Exclude direct quotes | Exclude straight quoted textual content from the similarity verify. |
| Ignore white area | Ignore white area (areas, tabs, and so on.) when calculating similarity. |
| Exclude matching case | Ignore case (higher or decrease) when calculating similarity. |
| Exclude URL and HTML tags | Exclude URL and HTML tags from the similarity verify. |
Customizing TurnItIn Similarity Report Choices
The TurnItIn Similarity Report gives detailed insights into the originality and potential plagiarism in your college students’ work. Listed here are some choices to customise the report:
Similarity Rating Threshold
Set a threshold for the similarity rating, above which submissions might be flagged. You’ll be able to specify totally different thresholds for textual content, net, and repository searches.
Exclusion Varieties
Exclude sure varieties of content material from the similarity verify, similar to quotes, citations, or particular phrases. This helps filter out authentic matches that aren’t indicative of plagiarism.
Allowed Similarity
Outline a suitable stage of similarity between submissions earlier than they’re flagged for potential plagiarism. This enables for some extent of overlap, similar to widespread phrases or references.
Doc View
Select whether or not to view the similarity report in color-coded or proportion view. Coloration-coded view highlights matching textual content, whereas proportion view shows the proportion of textual content that matches different sources.
Exclusions
Exclude particular net pages or paperwork from the similarity verify. That is helpful for excluding course supplies or instructor-provided sources.
Sources Excluded from Similarity Scores
Establish particular sources, similar to a category web site or a course bibliography, that needs to be excluded from the similarity rating calculation.
Superior Similarity Settings
Configure superior settings, similar to how the similarity index is calculated, the therapy of inline feedback, and the inclusion of metadata within the report. This gives granular management over the report’s accuracy and specificity.
| Setting | Description |
|---|---|
| Exclude Submitted Textual content | Excludes the scholar’s personal textual content from the similarity calculation. |
| Ignore Citing Sources | Treats cited sources as excluded content material. |
| Embody Inline Feedback | Contains teacher feedback within the similarity calculation. |
Managing Pupil TurnItIn Submissions
Canvas gives a number of choices for managing scholar TurnItIn submissions. These choices permit instructors to customise the submission course of, evaluate submissions, and supply suggestions to college students.
Submission Settings
Instructors can configure submission settings when creating or enhancing an task. These settings embrace:
- Turnitin Engine: Select between the Unique or New TurnItIn engine.
- Similarity Threshold: Set the proportion threshold at which submissions might be flagged as related.
- Exclude Sources: Exclude particular sources from similarity checking, similar to course supplies or authorized readings.
- Enable Resubmissions: Enable college students to submit revised variations of their work after receiving suggestions.
Reviewing Submissions
As soon as college students have submitted their assignments, instructors can evaluate the submissions within the TurnItIn tab of the task. Submissions are listed with their corresponding similarity scores. Instructors can:
- View Similarity Report: Entry detailed experiences that spotlight potential sources of plagiarism.
- Annotate Submissions: Add feedback and suggestions straight on the scholar’s submitted work.
- Obtain Submissions: Obtain scholar submissions for offline evaluate or archiving.
- Mark as Unique: Confirm {that a} submission is unique and exempt it from future similarity checks.
Offering Suggestions
Instructors can present suggestions to college students by means of TurnItIn submissions. Suggestions may be supplied within the following methods:
- Annotate Submissions: Use the annotation instruments to focus on particular textual content and add feedback.
- Present Total Suggestions: Depart basic feedback and suggestions on the submission as an entire.
li>Use Rubrics: Create and apply rubrics to evaluate scholar submissions and supply structured suggestions.
Turnitin Similarity Ranges
Turnitin makes use of a color-coded system to point the similarity stage of a submission:
| Similarity Degree | Coloration Code |
|---|---|
| Low (0% – 24%) | Inexperienced |
| Medium (25% – 49%) | Yellow |
| Excessive (50% – 74%) | Orange |
| Very Excessive (75% – 100%) | Crimson |
Troubleshooting TurnItIn Points
Listed here are some widespread points you could encounter whereas making a Canvas task have a TurnItIn submission:
Error: “TurnItIn not enabled for this course”
Be sure that the TurnItIn integration is activated for the course in Canvas settings.
Error: “File can’t be uploaded to TurnItIn”
Confirm that the file format is supported by TurnItIn (e.g., PDF, Phrase, PowerPoint). Test the file measurement limits and make sure that the file doesn’t comprise any corrupted or particular characters.
Error: “TurnItIn processing taking too lengthy”
This will happen throughout peak utilization occasions. Think about submitting the task at a unique time or contacting TurnItIn help for help.
Error: “TurnItIn report incorporates plagiarism”
Fastidiously evaluate the report back to establish the sections of textual content flagged as plagiarism. Cite all sources appropriately and make any obligatory revisions to the submission.
Error: “Can not view the TurnItIn report”
Guarantee that you’ve entry to the task submission and that the TurnItIn report has been generated. Contact the teacher or TurnItIn help for additional help.
Error: “TurnItIn integration is just not working”
Test if the Canvas and TurnItIn accounts are correctly linked. Clear your browser cache and log again into Canvas. If the problem persists, contact TurnItIn help.
Error: “Incorrect submission time”
Confirm the submission time specified within the task settings and make sure that it aligns with the precise submission time.
Error: “TurnItIn license expired”
Contact your establishment’s administrator to verify the standing of the TurnItIn license and renew it if obligatory.
Troubleshooting Superior Points
In case you encounter extra complicated points associated to particular task settings or technical errors, seek advice from the TurnItIn documentation or contact their help staff for specialised help.
| Problem | Troubleshooting Steps |
|---|---|
| Incompatible file format | Convert the file to a supported format (e.g., PDF, Phrase) utilizing a converter software. |
| TurnItIn not activated for task | In Canvas, allow TurnItIn for the task beneath “Submission Choices.” |
| Gradual processing time | Submit throughout off-peak hours, cut back file measurement, or contact TurnItIn help. |
Verifying TurnItIn Scan Outcomes
10. Assessment the Originality Report’s Common Info
Study the next sections within the Originality Report’s Common Info tab:
- Similarity Index: A proportion indicating the quantity of textual content within the submission that matches content material from exterior sources.
- Textual content Inclusion: The full variety of phrases within the submission and the quantity that match exterior sources.
- Web: The proportion of textual content that matches content material discovered on the web.
- Publications: The proportion of textual content that matches content material present in educational publications.
- Pupil Papers: The proportion of textual content that matches content material present in submissions from different college students.
- Institutional Repository: The proportion of textual content that matches content material present in your establishment’s database of scholar work.
| Originality Report Part | Description |
|---|---|
| Web | Matches with net pages and different on-line sources |
| Publications | Matches with scholarly articles, books, and different educational supplies |
| Pupil Papers | Matches with submissions from different college students in your establishment’s TurnItIn database |
| Institutional Repository | Matches with beforehand submitted scholar work at your establishment |
The way to Make Canvas Task Have a Flip It In
Canvas is a studying administration system that permits instructors to create and handle on-line programs. One of many options of Canvas is the flexibility to create assignments that require college students to submit their work by means of Turnitin, a plagiarism detection service. Turnitin compares college students’ submissions to a database of different submissions and identifies any situations of plagiarism. This might help instructors make sure that college students are submitting unique work.
To make a Canvas task have a TurnItIn, observe these steps:
1. Create a brand new task in Canvas.
2. Click on on the “Submission Kind” drop-down menu and choose “Turnitin”.
3. Click on on the “Settings” button.
4. Below the “Turnitin Settings” tab, choose the choices that you simply wish to use for the task.
5. Click on on the “Save” button.
After getting created the task, college students will be capable of submit their work by means of Turnitin by clicking on the “Submit” button on the task web page. Turnitin will then evaluate the scholar’s submission to its database of different submissions and establish any situations of plagiarism.
Individuals Additionally Ask About The way to Make Canvas Task Have a Flip In
How do I verify if a Canvas task has TurnItIn enabled?
To verify if a Canvas task has TurnItIn enabled, open the task and click on on the “Submission Kind” drop-down menu. If “Turnitin” is chosen, then TurnItIn is enabled for the task.
How do I submit an task to TurnItIn?
To submit an task to TurnItIn, open the task and click on on the “Submit” button. Then, click on on the “Turnitin” tab and observe the directions on the display.
How do I view TurnItIn experiences?
To view TurnItIn experiences, open the task and click on on the “Grades” tab. Then, click on on the “Turnitin” tab and choose the “View Report” hyperlink subsequent to the scholar’s submission.
