The Honda Silverwing is a maxi-scooter that was first launched in 2001. It has been praised for its consolation, efficiency, and gas effectivity. Nonetheless, one widespread criticism in regards to the Silverwing is that it may be troublesome to entry the gas pump. This is usually a downside if the gas pump must be changed or repaired.
On this article, we are going to present you methods to get to the gas pump on a Honda Silverwing. We’ll present step-by-step directions and images that will help you full the duty. We may even present some recommendations on methods to keep away from widespread errors.
Earlier than you start, it is very important collect the instruments and supplies that you’ll want. You’ll need a socket wrench, a Phillips screwdriver, and a flat-blade screwdriver. Additionally, you will want a brand new gas pump, if you’re changing the previous one. After getting gathered the required instruments and supplies, you may start the method of eradicating the gas pump.
Figuring out the Location of the Gas Pump
The gas pump in a Honda Silverwing is an integral part that gives the engine with a steady provide of gas. It’s positioned contained in the gas tank and is submerged within the gasoline, which helps to maintain it cool and lubricated. To entry the gas pump, you will want to take away the gas tank from the bike.
Listed here are the steps on methods to get to the gas pump:
| Step | Description |
|---|---|
| 1 | Take away the seat. |
| 2 | Disconnect the gas line from the gas pump. |
| 3 | Take away the bolts that maintain the gas pump in place. |
| 4 | Pull the gas pump out of the gas tank. |
After getting eliminated the gas pump, you may examine it for any injury or put on. If the gas pump is broken, it’s going to must be changed.
Getting ready for Gas Pump Entry
Earlier than you may entry the gas pump, you will must take a couple of preparatory steps. These steps will provide help to to securely and efficiently full the restore.
Collect your instruments and supplies
You’ll need the next instruments and supplies to finish this restore:
- Socket wrench set
- Screwdriver set
- Gas line pliers
- Gas filter
- Gas pump
- Gasoline
Security issues
When working in your car’s gas system, it is very important take security precautions to keep away from severe damage or injury. The next security issues needs to be noticed:
- Work in a well-ventilated space.
- Don’t smoke or use open flames close to the car.
- Put on security glasses and gloves.
- Disconnect the unfavorable battery terminal earlier than beginning work.
- Relieve gas system stress earlier than disconnecting any gas traces.
Find the gas pump
The gas pump is positioned within the gas tank. To entry the gas pump, you will want to take away the gas tank from the car. The gas tank is usually positioned beneath the rear of the car. After getting eliminated the gas tank, it is possible for you to to entry the gas pump.
Eradicating the Seat and Fairings
To entry the gas pump, you will must take away the seat and fairings. Here is how:
1. Take away the Seat
Find the seat launch lever beneath the rear of the seat. Pull the lever in the direction of you and elevate the seat off the bike.
2. Take away the Left Fairing
Find the fasteners holding the left fairing in place. Usually, you will discover two screws on the entrance, two on the again, and one or two alongside the aspect. Take away all of the fasteners and punctiliously pull the fairing away from the bike.
3. Take away the Proper Fairing
Repeat steps for eradicating the left fairing for the best aspect, being attentive to detaching any extra wires or parts which may be linked to the best fairing, such because the flip sign connector, the gas line connector, or the exhaust pipe hanger.
| Part | Location | Removing Sort |
|---|---|---|
| Flip Sign Connector | Behind the fairing | Disconnect wire |
| Gas Line Connector | Close to the gas tank | Loosen clamp and detach |
| Exhaust Pipe Hanger | Backside of the fairing | Unbolt hanger |
Disconnecting Electrical Parts
Earlier than disconnecting any electrical parts, it is very important disconnect the unfavorable battery terminal to forestall electrical shocks or injury to the system. Listed here are the steps concerned in disconnecting {the electrical} parts:
1. Find the Gas Pump Electrical Connector
The gas pump electrical connector is usually positioned close to the gas tank or gas pump. It’s a giant, waterproof connector with a number of wires operating to it.
2. Disconnect the Gas Pump Electrical Connector
To disconnect the gas pump electrical connector, merely press on the discharge tab and pull the connector aside. Don’t pull on the wires, as this could injury them.
3. Disconnect the Gas Pump Floor Wire (Optionally available)
In some instances, there could also be a separate floor wire linked to the gas pump. If there’s a floor wire, disconnect it by loosening the bolt or nut that secures it.
4. Detaching the Gas Pump Meeting from the Gas Tank
As soon as {the electrical} parts are disconnected, you may detach the gas pump meeting from the gas tank. This may occasionally require eradicating bolts, nuts, or clips that safe the meeting to the tank.
To supply additional steerage on detaching the gas pump meeting from the gas tank, contemplate the next desk:
| Car Mannequin | Detachment Directions |
|---|---|
| Honda Silverwing 600 (2002-2008) | Take away the 4 bolts that safe the gas pump meeting to the gas tank. Gently elevate the meeting straight as much as detach it. |
| Honda Silverwing 400 (2009-2018) | Disconnect the quick-release gas line connectors. Take away the 2 bolts that safe the gas pump meeting to the gas tank. Rigorously elevate the meeting straight as much as detach it. |
Draining Gas from the Gas Line
As soon as the gas line is disconnected from the gas pump, you may proceed to empty the gas from the road. That is performed to forestall gas from spilling or leaking out in the course of the set up of the brand new gas pump.
To empty the gas from the gas line, observe these steps:
- Place an appropriate container beneath the gas line.
- Open the gas line by both disconnecting the quick-disconnect connector or loosening the gas line clamp.
- Enable the gas to empty into the container.
- As soon as the gas has stopped flowing, reconnect the gas line or tighten the gas line clamp.
- Dispose or recycle the gas drained from the gas line in accordance with your native laws.
Desk: Gas Disposal
| Methodology | Directions |
|---|---|
| Get rid of gas at a waste assortment heart | Contact your native waste administration authority for directions on methods to eliminate gas safely and legally. |
| Recycle gas | Find a recycling heart that accepts gas. Examine on-line or together with your native authorities for choices. |
| Use gas for different functions (e.g., cleansing components) | Filter the gas by means of a fine-mesh filter to take away any impurities. Use the filtered gas for cleansing or different non-automotive functions. |
Eradicating the Gas Tank
Earlier than accessing the gas pump, you might want to take away the gas tank. Here is how:
- Place the scooter on a steady floor and have interaction the parking brake.
- Take away the seat by lifting it and unhooking the latch.
- Find the gas line and disconnect it from the tank by urgent the discharge clip.
- Disconnect {the electrical} connector for the gas degree sensor.
- Unbolt the bolts securing the gas tank to the body.
- Rigorously elevate the gas tank and place it apart.
Notice:
Take precautions when dealing with gas as it’s flammable. Guarantee good air flow and keep away from smoking or utilizing open flames close to the work space.
| Instruments Required | Description |
|---|---|
| Socket Wrench | For eradicating bolts securing the gas tank |
| Phillips Screwdriver | For disconnecting {the electrical} connector |
| Gas Line Disconnect Device | For releasing the gas line clip |
Accessing the Gas Pump Module
**1. Take away the seat.**
**2. Take away the battery.**
**3. Take away the battery field.**
**4. Take away the air cleaner field.**
**5. Take away the gas tank.**
**6. Take away the gas pump cowl.**
**7. Disconnect the gas traces and electrical connector.**
To disconnect the gas traces, use a pair of pliers to squeeze the discharge tabs on the gas line connectors and pull the gas traces off the gas pump. To disconnect {the electrical} connector, use a small screwdriver to launch the lock tab on the connector and pull the connector off the gas pump.
**8. Take away the gas pump.**
The gas pump is held in place by two screws. Take away the screws and elevate the gas pump out of the gas tank.
**9. Examine the gas pump and exchange it if obligatory.**
Examine the gas pump for any injury or put on. If the gas pump is broken or worn, it have to be changed.
**10. Reinstall the gas pump.**
To reinstall the gas pump, reverse the steps within the removing process. Remember to tighten the screws that maintain the gas pump in place.
**11. Reinstall the gas tank.**
**12. Reinstall the air cleaner field.**
**13. Reinstall the battery field.**
**14. Reinstall the battery.**
**15. Reinstall the seat.**
The way to Get to the Gas Pump
In case your Honda Silverwing is experiencing fuel-related points, it’s possible you’ll want to interchange the gas pump. Here is a step-by-step information on methods to get to the gas pump:
1. Security First
Earlier than you start, make sure the Silverwing is parked on a degree floor, the engine is off, and the ignition secret is eliminated.
2. Take away the Seat
Find the seat lock, sometimes positioned on the entrance or rear of the seat. Insert the important thing and switch it to launch the seat. Carry the seat off the Silverwing.
3. Disconnect the Battery
Use a wrench to loosen the unfavorable battery terminal and disconnect the battery.
4. Take away the Gas Tank
Find the gas tank bolts, often discovered on the edges of the tank. Take away the bolts and punctiliously elevate the gas tank off the body.
5. Take away the Gas Pump Cowl
Discover the gas pump cowl, sometimes secured by bolts or screws. Take away the duvet to reveal the gas pump.
6. Disconnect the Gas Traces
Rigorously disconnect the gas traces linked to the gas pump. Use a gas line removing device for security.
7. Take away the Gas Pump
Find the gas pump bolts or screws. Take away them and gently pull the gas pump out of the meeting.
8. Examine and Exchange the Gas Pump
Examine the gas pump for injury or put on. If obligatory, exchange the gas pump with a brand new one. Guarantee the right fitment and safe it with the bolts or screws.
| Half | Torque |
|---|---|
| Gas Pump Bolts | 8-10 Nm |
9. Reconnect
Join the gas traces to the brand new gas pump. Reinstall the gas pump cowl and gas tank.
10. Reconnect the Battery
Reconnect the unfavorable battery terminal and tighten it securely.
11. Set up the Seat
Place the seat on the Silverwing and have interaction the seat lock.
12. Begin the Engine
Insert the ignition key and begin the engine. Examine for any gas leaks and make sure the engine runs easily.
Reinstalling Parts in Reverse Order
9. Reinstall the Gas Pump and Filter
a. Align the gas pump with the gas tank and punctiliously insert it into the opening.
b. Safe the gas pump utilizing the mounting bolts and tighten them to the required torque.
c. Slide the gas filter onto the gas pump outlet and safe it with the clamp.
d. Reconnect the gas line to the gas pump and tighten the clamp.
e. Join {the electrical} connector to the gas pump.
f. Set up the gas pump cowl and safe it with the bolts.
10. Reinstall the Filler Cap
a. Exchange the filler cap and tighten it securely.
11. Reinstall the Battery
a. Join the constructive battery terminal first after which the unfavorable terminal.
b. Tighten the battery terminals to the required torque.
12. Reinstall the Seat
a. Align the seat with the body and slide it into place.
b. Safe the seat with the seat bolt.
13. Examine for Leaks
a. Begin the engine and let it idle.
b. Examine for any gas leaks from the gas pump, gas filter, or gas line.
c. If any leaks are discovered, tighten the connections or exchange the broken parts.
Priming the Gas System
After changing your gas pump, you might want to prime the gas system to make sure that there may be gas flowing to the engine. Listed here are the steps concerned in priming the gas system:
If in case you have any leaks or if the engine doesn’t begin after priming, it’s possible you’ll must repeat these steps or seek the advice of with knowledgeable mechanic.
How To Get To The Gas Pump On A Honda Silverwing
The gas pump on a Honda Silverwing is positioned within the gas tank. To entry the gas pump, you will want to take away the gas tank from the bike.
To take away the gas tank, observe these steps:
- Flip off the gas petcock.
- Disconnect the gas line from the gas tank.
- Take away the bolts that safe the gas tank to the body.
- Rigorously elevate the gas tank off of the bike.
As soon as the gas tank is eliminated, you will want to take away the gas pump from the gas tank. To take away the gas pump, observe these steps:
- Disconnect {the electrical} connector from the gas pump.
- Take away the bolts that safe the gas pump to the gas tank.
- Rigorously elevate the gas pump out of the gas tank.
As soon as the gas pump is eliminated, you may exchange it with a brand new gas pump. To put in a brand new gas pump, observe these steps:
- Insert the brand new gas pump into the gas tank.
- Safe the gas pump to the gas tank with the bolts.
- Join {the electrical} connector to the gas pump.
- Reinstall the gas tank on the bike.
- Join the gas line to the gas tank.
- Activate the gas petcock.
Folks Additionally Ask About Honda Silverwing How To Get To The Gas Pump
What are the signs of a foul gas pump on a Honda Silverwing?
The signs of a foul gas pump on a Honda Silverwing can embody:
- Issue beginning the bike
- Engine stalling
- Lack of energy
- Decreased fuel mileage
How a lot does it price to interchange a gas pump on a Honda Silverwing?
The associated fee to interchange a gas pump on a Honda Silverwing can range relying on the yr and mannequin of the bike. The common price to interchange a gas pump on a Honda Silverwing is between $200 and $400.
How lengthy does it take to interchange a gas pump on a Honda Silverwing?
It takes about 1-2 hours to interchange a gas pump on a Honda Silverwing.
