In the event you’re the proud proprietor of a Fossil watch, you recognize that it is a fashionable and dependable timepiece. However even the perfect watches want just a little TLC every so often, and one of the crucial vital upkeep duties is changing the battery. Whereas it could seem to be a frightening activity, altering a Fossil watch battery is definitely fairly easy. With the fitting instruments and just a little endurance, you’ll be able to have your watch up and operating once more very quickly.
Earlier than you start, it is vital to assemble the required instruments. You may want a small Phillips head screwdriver, a watch battery, and a delicate material. Upon getting your instruments, you can begin by eradicating the again of the watch. To do that, merely unscrew the 4 screws which can be positioned across the perimeter of the again. As soon as the screws are eliminated, you’ll be able to gently pry the again off of the watch. Watch out to not injury the watch or the gasket that seals the again in place.
With the again of the watch eliminated, you will now have entry to the battery. The battery is often held in place by a small steel clip. To take away the battery, merely use your screwdriver to softly pry the clip away from the battery. As soon as the clip is eliminated, you’ll be able to elevate the battery out of the watch. Watch out to not contact the battery together with your fingers, as this could injury it. As soon as the previous battery is eliminated, you’ll be able to insert the brand new battery into the watch. Be sure that the optimistic (+) aspect of the battery is going through up. Then, use your screwdriver to softly pry the steel clip again into place. Lastly, screw the again of the watch again on and also you’re all set!
Determine the Battery Sort
Earlier than changing your Fossil watch battery, it is essential to find out the proper battery kind. This data is often engraved on the again of the watch or contained in the battery compartment. If it isn’t seen, this is a step-by-step information that can assist you establish the battery kind:
1. Open the Battery Compartment
Pry open the battery compartment utilizing a small screwdriver or a key. The compartment is normally positioned on the again or aspect of the watch, and it could have a screw or a snap-on design.
Suggestions for Opening the Battery Compartment:
- Use the suitable device to keep away from damaging the watch.
- If the compartment is screwed, flip the screw counterclockwise to loosen it.
- If the compartment is snapped on, gently pry it open utilizing a skinny object.
2. Study the Battery
As soon as the compartment is open, take away the previous battery. Rigorously study the battery for any markings or engravings that point out its kind.
Widespread Battery Varieties Utilized in Fossil Watches:
| Battery Sort | Engraving/Markings |
|---|---|
| CR2032 | CR2032, DL2032, ECR2032 |
| CR2025 | CR2025, DL2025, ECR2025 |
| SR626SW | SR626SW, 377, 260, SR62 |
Notice: In the event you can’t discover any markings on the battery, check with your watch’s person guide or seek the advice of an expert watchmaker.
Take away the Previous Battery
To take away the previous battery, comply with these detailed steps:
- **Put together your instruments:** Collect a small flathead screwdriver, a pair of tweezers, and a brand new watch battery (CR2430 for many Fossil watches).
- **Find the battery compartment:** On the again of the watch, you will see a small compartment cowl held in place by screws.
- **Take away the duvet screws:** Utilizing the flathead screwdriver, rigorously take away the 2 small screws that maintain the duvet.
- **Open the compartment:** As soon as the screws are eliminated, gently pry open the battery compartment cowl utilizing the tweezers or your fingernail.
- **Securely take away the previous battery:** Find the previous battery, sometimes held in place by a small spring. Use the tweezers to softly elevate the battery out. Don’t use your fingers, as pores and skin oils can injury the battery.
| Software | Function |
|---|---|
| Flathead Screwdriver | Take away battery compartment screws |
| Tweezers | Take away previous battery |
| New Watch Battery (CR2430) | Change previous battery |
Battery Is Useless
In case your Fossil watch’s battery is useless, you will want to exchange it. Here is how:
- Take away the watchband by urgent the spring bars on both aspect of the watch case.
- Flip the watch over and take away the again cowl by unscrewing the screws that maintain it in place.
- Find the battery and take away it by gently prying it out with a small screwdriver or your fingernail.
- Insert the brand new battery into the watch, ensuring that the optimistic (+) and unfavourable (-) terminals are going through the proper manner.
- Change the again cowl and screw it again into place.
- Change the watchband by sliding the spring bars again into place.
Arms Are Not Aligned
If the arms of your Fossil watch should not aligned, you’ll be able to regulate them by following these steps:
- Take away the watchband as described in step 1 of the earlier part.
- Flip the watch over and take away the again cowl as described in step 2 of the earlier part.
- Find the small adjustment screw on the again of the watch motion and switch it gently with a small screwdriver till the arms are aligned appropriately.
- Change the again cowl and screw it again into place.
- Change the watchband.
Watch Is Not Preserving Time
In case your Fossil watch will not be retaining time, it could be an indication that the battery is nearing the tip of its life or the motion must be serviced. You possibly can attempt changing the battery, but when that doesn’t remedy the issue, it is best to have the watch serviced by a certified watchmaker.
Troubleshooting Widespread Points
Battery Is Draining Too Rapidly
There are some things that may trigger your Fossil watch’s battery to empty too shortly. These embrace:
- Utilizing the backlight regularly
- Enabling Bluetooth or different wi-fi options
- Utilizing the chronograph characteristic regularly
To increase the lifetime of your battery, attempt to keep away from utilizing these options excessively.
Watch Is Not Waterproof
Fossil watches are waterproof to totally different depths, however they aren’t waterproof. Which means you shouldn’t swim or bathe together with your watch on. In case your watch will get moist, dry it off instantly with a delicate material.
Watch Band Is Too Free or Too Tight
In case your Fossil watch band is just too unfastened, it could fall off your wrist. Whether it is too tight, it could be uncomfortable to put on. To regulate the band, comply with these steps:
- Take away the watchband as described in step 1 of the primary part.
- Find the small adjustment holes on the underside of the band and use a small screwdriver or your fingernail to maneuver the pins into the specified holes.
- Change the watchband.
Watch Glass Is Scratched
If the glass in your Fossil watch is scratched, you’ll be able to attempt to take away the scratches utilizing a delicate material and a small quantity of toothpaste. Rub the toothpaste gently in a round movement till the scratches are eliminated. Rinse the watch totally with water and dry it with a delicate material.
Watch Case Is Dented or Scratched
If the case of your Fossil watch is dented or scratched, you’ll be able to attempt to take away the dents or scratches utilizing a delicate material and a small quantity of steel polish. Rub the polish gently in a round movement till the dents or scratches are eliminated. Rinse the watch totally with water and dry it with a delicate material.
Watch Motion Is Not Working
If the motion of your Fossil watch will not be working, it could be an indication that the watch must be serviced. You must have the watch serviced by a certified watchmaker.
How To Change Fossil Watch Battery
Altering the battery in a Fossil watch is a comparatively easy course of that may be accomplished at house with just a few fundamental instruments. Listed here are the steps on tips on how to change a Fossil watch battery:
1. Collect your instruments. You’ll need a small Phillips head screwdriver, a watch battery, and a lint-free material.
2. Open the watch again. Use the screwdriver to take away the 4 screws that maintain the watch again in place. Watch out to not strip the screws.
3. Take away the previous battery. Use the lint-free material to softly pry the previous battery out of the watch. Watch out to not injury the watch motion.
4. Insert the brand new battery. Align the optimistic (+) terminal of the brand new battery with the optimistic (+) terminal on the watch motion. Gently press the battery into place.
5. Shut the watch again. Change the watch again and tighten the screws. Make sure you tighten the screws evenly in order that the watch again is safe.
6. Take a look at the watch. As soon as the watch again is closed, press the button to start out the watch. The watch ought to begin operating instantly.
Folks Additionally Ask About How To Change Fossil Watch Battery
How typically ought to I alter the battery in my Fossil watch?
The battery in a Fossil watch must be modified each 2-3 years or when the watch begins to lose time. This can be sure that your watch continues to run precisely.
Can I alter the battery in my Fossil watch myself?
Sure, you’ll be able to change the battery in your Fossil watch your self with just a few fundamental instruments. Comply with the steps outlined above to vary the battery safely and simply.
How a lot does it value to vary the battery in a Fossil watch?
The fee to vary the battery in a Fossil watch will fluctuate relying on the kind of watch and the jeweler you’re taking it to. Nevertheless, you’ll be able to count on to pay between $10 and $20 for a battery change.
