In fact, you respect the stunning new knitted scarf you have completed, but it surely’s not fairly full. You might bind it off and name it a day, however a pleasant edging will give it a sophisticated {and professional} look. There are a lot of completely different edging methods you need to use to complete off your scarf, so select one that you simply like and enhances the yarn and sample you used. With just a bit little bit of effort, you can provide your scarf a lovely of entirety that can make it look store-bought.
One standard edging method is the crocheted picot bind-off. This edging creates a fragile and lacy impact that’s good for scarves made with advantageous or light-weight yarn. To do the crocheted picot bind-off, you will want a crochet hook that’s one dimension smaller than the needles you used to knit the headband. Insert the crochet hook into the primary sew on the left-hand needle, yarn over, and pull up a loop. Yarn over once more and pull via each loops on the hook. Repeat this course of till you’ve certain off the entire stitches on the needle. To create the picot, yarn over and pull up a loop, then yarn over once more and pull via all three loops on the hook. Repeat this course of as many occasions as desired.
One other standard edging method is the knitted I-cord bind-off. This edging creates a sturdy and sturdy end that’s good for scarves made with cumbersome or textured yarn. To do the knitted I-cord bind-off, you will want two needles which might be one dimension smaller than the needles you used to knit the headband. Solid on three stitches onto one of many needles. Knit the primary two stitches, then slip the primary sew over the second sew. Knit the subsequent sew, then slip the primary sew over the second sew once more. Repeat this course of till you’ve certain off the entire stitches on the needle. Minimize the yarn and pull it via the final loop to safe.
Ending the Scarves with a Bind Off
Bind Off All Stitches
The most typical method to end a shawl is to bind off all of the stitches. This creates a neat and tidy edge that can assist to stop the headband from unraveling. To bind off, observe these steps:
- Knit the primary two stitches on the left-hand needle.
- Slip the primary sew over the second sew.
- Knit the subsequent sew on the left-hand needle.
- Slip the primary sew over the second sew once more.
- Repeat steps 3 and 4 till there is just one sew left on the left-hand needle.
- Minimize the yarn, leaving a number of inches of tail.
- Pull the tail via the final sew on the left-hand needle.
- Weave within the ends of the yarn to safe the bind off.
Here’s a desk summarizing the steps for binding off all stitches:
| Step | Motion |
|---|---|
| 1 | Knit the primary two stitches on the left-hand needle. |
| 2 | Slip the primary sew over the second sew. |
| 3 | Knit the subsequent sew on the left-hand needle. |
| 4 | Slip the primary sew over the second sew once more. |
| 5 | Repeat steps 3 and 4 till there is just one sew left on the left-hand needle. |
| 6 | Minimize the yarn, leaving a number of inches of tail. |
| 7 | Pull the tail via the final sew on the left-hand needle. |
| 8 | Weave within the ends of the yarn to safe the bind off. |
Primary Knit Bind Off
The Primary Knit Bind Off is a straightforward and safe method to finish your scarf knitting. It is also very stretchy, which makes it perfect for scarves that you really want to have the ability to wrap round your neck a number of occasions.
To do a Primary Knit Bind Off, you may must:
- Knit the primary two stitches on the left-hand needle.
- Slip the primary sew over the second sew to bind them off.
- Knit the subsequent sew on the left-hand needle.
- Slip the primary sew over the second sew to bind them off.
- Repeat steps 3 and 4 till you’ve just one sew left on the left-hand needle.
- Minimize the yarn, leaving a 6-inch tail.
- Thread the tail via the final sew on the left-hand needle and pull it tight to safe.
Listed below are some suggestions for doing a Primary Knit Bind Off:
- Be certain that to maintain the stitches unfastened as you knit them, in order that they will simply be slipped over one another.
- Do not pull the yarn too tightly whenever you’re binding off the stitches, or the bind-off can be too tight and inelastic.
- In case you’re having bother slipping the stitches over one another, you need to use a crochet hook that will help you.
Knit Bind Off Desk
The next desk offers a step-by-step information to the knit bind off:
| Step | Directions |
|---|---|
| 1 | Knit the primary two stitches on the left-hand needle. |
| 2 | Slip the primary sew over the second sew to bind them off. |
| 3 | Knit the subsequent sew on the left-hand needle. |
| 4 | Slip the primary sew over the second sew to bind them off. |
| 5 | Repeat steps 3 and 4 till you’ve just one sew left on the left-hand needle. |
| 6 | Minimize the yarn, leaving a 6-inch tail. |
| 7 | Thread the tail via the final sew on the left-hand needle and pull it tight to safe. |
Lace Bind Off
This bind-off methodology creates a chic and delicate lace-like edge, good for clothes and equipment. It includes knitting collectively the loops on the right-hand needle after which inserting them on the left-hand needle, much like the usual bind-off however with an extra step.
Directions:
-
Knit the primary 2 stitches: Knit the primary two stitches on the right-hand needle.
-
Yarn over: Deliver the yarn ahead and over the right-hand needle.
-
Knit collectively: Insert the left-hand needle into the primary sew on the right-hand needle and knit it along with the yarn on the needle.
-
Carry the sew: Carry the ensuing loop over the right-hand needle and onto the left-hand needle.
-
Repeat steps 2-4: Proceed knitting collectively the primary two stitches on the right-hand needle, yarn over, and lifting the brand new loop onto the left-hand needle.
-
Knit the subsequent sew: Knit the subsequent sew on the right-hand needle.
-
Repeat steps 1-6: Repeat steps 1-6 till all stitches are certain off, creating a lovely and complex lace edge.
Sewn Bind Off
The sewn bind-off is a stretchy bind-off that’s good for scarves and different initiatives that want to have the ability to stretch. Additionally it is a very simple bind-off to do.
Step-by-Step Directions:
- Knit the primary two stitches.
- Insert the left-hand needle into the primary sew on the left-hand needle and knit it via the again loop.
- Slip the primary sew over the second sew and off the left-hand needle.
- Knit the subsequent sew.
- Repeat steps 2-4 till just one sew stays on the left-hand needle.
- Minimize the yarn, leaving a tail of about 6 inches.
- Thread the tail of yarn via the final sew on the left-hand needle.
- Pull the tail of yarn to tighten the bind-off.
Suggestions:
- To make the bind-off much more stretchy, use a bigger needle dimension for the bind-off than you used for the remainder of the headband.
- Make sure to pull the tail of yarn tightly when tightening the bind-off. It will assist to stop the bind-off from coming undone.
- The sewn bind-off will also be used to hitch two items of knitting collectively. To do that, merely sew the bind-off of 1 piece to the cast-on of the opposite piece.
| Bind-off Technique | Sewn Bind Off |
| Problem | Simple |
| Stretchiness | Stretchy |
| Makes use of | Scarves, different initiatives that want to have the ability to stretch |
Ornamental Bind Offs
Ornamental bind offs add a chic of entirety to your knitted scarves. This is a information to 3 standard methods:
1. K2tog Bind Off
Knit the primary two stitches collectively, slip them again onto the left needle, and bind off the newly created sew. Repeat till all stitches are certain off.
2. I-Twine Bind Off
Insert a knitting needle into the primary two stitches, elevate them over the right-hand needle, and knit them collectively. Repeat till solely three stitches stay, then bind off.
3. Seed Sew Bind Off
Knit one sew and purl the subsequent till solely two stitches stay. Knit these two stitches collectively and bind off.
4. Picot Bind Off
Knit two stitches, yarn over, and knit the subsequent two stitches. Slip the primary three stitches again onto the left needle and bind off the newly created sew. Repeat till all stitches are certain off.
5. Shell Bind Off
Bind off 4 stitches. Then, *knit two stitches, slip two stitches to the right-hand needle, knit two stitches, and move the slipped stitches over the knitted stitches.* Repeat from * to * till all stitches are certain off.
6. Swiss Bind Off
Bind off two stitches. Then, *knit one sew, slip the subsequent sew to the right-hand needle, purl one sew, and move the slipped sew over the purled sew.* Repeat from * to * till all stitches are certain off.
7. Lace Bind Off
Bind off 4 stitches. Then, *knit two stitches collectively, yarn over, knit two stitches collectively, and bind off two stitches.* Repeat from * to * till all stitches are certain off.
8. Ribbed Bind Off
Bind off two stitches. Then, *knit two stitches, purl two stitches, knit two stitches, and bind off two stitches.* Repeat from * to * till all stitches are certain off.
9. Latvian Braid Bind Off
This system creates an ornamental braid that provides a novel contact to your scarves. Listed below are detailed directions:
| Row 1: | Knit 2 stitches, *slip 1 sew to the right-hand needle, knit 1 sew, move the slipped sew over the knitted sew.* Repeat from * to * till all stitches are labored. |
|---|---|
| Row 2: | Knit 2 stitches, *pull the earlier row’s slipped sew over the primary knitted sew, slip 1 sew to the right-hand needle, knit 1 sew, move the slipped sew over the knitted sew.* Repeat from * to * till all stitches are labored. |
| Row 3: | Bind off all stitches. |
Ending Touches: Including Fringe or Tassels
To offer your scarf that additional contact of aptitude, take into account including fringe or tassels. This is the way to obtain each:
Fringe
Supplies:
- Yarn in a contrasting or matching colour
- Scissors
Directions:
- Minimize the yarn into equal lengths, roughly twice the specified fringe size.
- Fold the yarn in half and thread it via a sew on the sting of the headband.
- Pull the ends of the yarn via the loop to create a lark’s head knot.
- Tighten the knot and repeat the method till you’ve created the specified quantity of fringe.
- Trim the ends of the perimeter to even them out.
Tassels
Supplies:
- Yarn in a contrasting or matching colour
- Cardboard or a tassel maker
- Scissors
Directions:
- Wrap the yarn across the cardboard or tassel maker repeatedly, making a thick bundle.
- Tie a bit of yarn tightly across the center of the bundle to safe it.
- Minimize the loops at one finish of the bundle to create the tassel strands.
- Take away the tassel from the cardboard and trim the strands to the specified size.
- Connect the tassel to the tip of the headband by stitching it on or threading it via a loop.
| Kind | Supplies | Directions |
|---|---|---|
| Fringe | Yarn, scissors | Minimize yarn, create lark’s head knots |
| Tassels | Yarn, cardboard, scissors | Wrap yarn, tie middle, minimize loops |
Shut a Scarf Knitting
After you have knitted the size of the headband you want, it’s time to shut it up. There are a number of other ways to do that, and the tactic you select will depend upon the look you’re going for. Listed below are three widespread strategies for closing a shawl knitting:
**Technique 1: Three-Needle Bind Off**
This methodology is ideal for making a stretchy, invisible seam. Additionally it is the commonest methodology for closing scarves.
- Maintain the 2 ends of the headband collectively, with the appropriate sides dealing with one another.
- Insert a 3rd needle into the primary sew on every finish of the headband.
- Knit the primary sew on the left-hand needle over the primary sew on the right-hand needle.
- Slip the primary sew on the left-hand needle again onto the right-hand needle.
- Repeat steps 3 and 4 till there is just one sew left on every needle.
- Minimize the yarn, leaving a protracted tail.
- Thread the tail via the final sew on every needle and pull to tighten
**Technique 2: Mattress Sew**
This methodology is ideal for making a extra ornamental seam. It’s usually used for scarves which might be knit in a lace or openwork sample.
- Maintain the 2 ends of the headband collectively, with the appropriate sides dealing with one another.
- Insert a needle into the primary sew on the left-hand finish of the headband.
- Deliver the needle up via the second sew on the right-hand finish of the headband.
- Knit the 2 stitches collectively.
- Repeat steps 2-4 till there are solely two stitches left on every needle.
- Minimize the yarn, leaving a protracted tail.
- Thread the tail via the final two stitches and pull to tighten
**Technique 3: Grafting**
This methodology is ideal for making a seamless be part of. It’s usually used for scarves which might be knit within the spherical.
- Maintain the 2 ends of the headband collectively, with the appropriate sides dealing with one another.
- Insert a crochet hook into the primary sew on every finish of the headband.
- Yarn over the hook and pull it via each stitches.
- Repeat steps 2-3 till there is just one sew left on every hook.
- Minimize the yarn, leaving a protracted tail.
- Thread the tail via the final sew on every hook and pull to tighten
Folks Additionally Ask About Shut a Scarf Knitting
What’s the easiest way to shut a shawl knitting?
The easiest way to shut a shawl knitting will depend upon the look you’re going for. The three strategies described above are all widespread and efficient methods to shut a shawl, so select the one that you simply suppose will work greatest in your venture.
Can I take advantage of any sort of yarn to shut a shawl knitting?
Sure, you need to use any sort of yarn to shut a shawl knitting. Nevertheless, it is very important use a yarn that’s the similar weight and fiber content material because the yarn you used to knit the headband. It will assist to make sure that the seam is robust and sturdy.
How do I make the seam on my scarf invisible?
There are a number of methods to make the seam in your scarf invisible. A method is to make use of the three-needle bind off methodology, which creates a stretchy, invisible seam. One other approach is to make use of a grafting method, which creates a seamless be part of. You can even use a mattress sew to create a extra ornamental seam.
