Connecting your JBL 660NC headphones to your Macbook is an easy course of that may be accomplished in only a few steps.
First, be certain that your headphones are powered on and in pairing mode. To do that, press and maintain the facility button for about 5 seconds till the LED mild begins to flash blue and white.
As soon as your headphones are in pairing mode, open the Bluetooth settings in your Macbook. You are able to do this by clicking on the Apple menu, then choosing “System Preferences” after which “Bluetooth”.
System Necessities
Earlier than pairing your JBL 660NC headphones together with your MacBook, guarantee compatibility by assembly the next system necessities:
- macOS Model: macOS 10.10 (Yosemite) or later
- Bluetooth Model: Bluetooth 4.0 or later (built-in or by way of a USB adapter)
- JBL 660NC Firmware: Newest firmware model (examine for updates via the JBL Headphones app or by way of USB connection)
Moreover, be certain that your MacBook’s Bluetooth is enabled and that the JBL 660NC headphones have ample battery life.
Bluetooth Preparations
To make sure a profitable Bluetooth connection, comply with these preparatory steps:
- Energy on the Headphones: Press and maintain the facility button on the fitting earcup for roughly 1 second till the LED indicator flashes blue.
- Allow Pairing Mode: With the headphones powered on, press and maintain the Bluetooth button (situated on the fitting earcup) for five seconds till the LED indicator blinks quickly blue and white.
- Open Bluetooth Menu on MacBook: In your MacBook, click on the Apple menu , choose “System Preferences,” after which select “Bluetooth.” Alternatively, use the keyboard shortcut Cmd + House to launch Highlight, then kind “Bluetooth” and press Enter.
Enabling Bluetooth on Your MacBook
To attach your JBL 660NC to your MacBook by way of Bluetooth, it’s essential to first allow Bluetooth in your MacBook. Here is a step-by-step information:
- Click on on the Apple menu within the top-left nook of your display.
- Choose “System Preferences” and click on on the Bluetooth icon.
- Be sure that Bluetooth is turned on by clicking the checkbox subsequent to “Bluetooth: On.”
- Your MacBook is now able to pair together with your JBL 660NC.
Placing Your JBL 660NC Headphones into Pairing Mode
To place your JBL 660NC headphones into pairing mode, comply with these steps:
- Energy in your headphones. To do that, slide the facility change to the "on" place. The LED indicator mild will flash blue.
- Press and maintain the Bluetooth button. The Bluetooth button is situated on the fitting ear cup. Maintain the button down for about 5 seconds, or till the LED indicator mild flashes blue and white.
- Your headphones at the moment are in pairing mode. They may stay in pairing mode for about 2 minutes. Throughout this time, you possibly can join your headphones to your MacBook by following the steps within the subsequent part.
| Step | Motion |
|---|---|
| 1 | Energy in your headphones by sliding the facility change to the “on” place. |
| 2 | Press and maintain the Bluetooth button on the fitting ear cup for about 5 seconds, or till the LED indicator mild flashes blue and white. |
| 3 | Your headphones at the moment are in pairing mode and can stay so for about 2 minutes. |
Verifying Profitable Connection
After getting accomplished the previous steps, you possibly can confirm that your JBL 660NC headphones are efficiently related to your MacBook by following these steps:
-
Click on on the Apple menu within the top-left nook of your display.
-
Choose “System Preferences” from the drop-down menu.
-
Click on on the “Bluetooth” icon within the System Preferences window.
-
Within the checklist of Bluetooth units, search for your JBL 660NC headphones. If they’re efficiently related, they are going to be listed as “Related.”
-
You too can check the connection by taking part in music in your MacBook. For those who can hear the music via your headphones, then the connection is profitable.
-
If you’re having hassle connecting your JBL 660NC headphones to your MacBook, you possibly can attempt the next:
-
Troubleshooting Suggestions Downside Answer My headphones will not be listed within the Bluetooth menu Be sure that your headphones are turned on and in pairing mode. My headphones are listed within the Bluetooth menu, however they don’t seem to be connecting Strive restarting your MacBook and your headphones. I can not hear any sound via my headphones Be sure that the quantity is turned up on each your MacBook and your headphones.
Pairing JBL 660NC with Macbook
1. Be certain that your JBL 660NC headphones are powered on and in pairing mode.
2. In your Macbook, navigate to the Bluetooth menu within the prime proper nook of the menu bar.
3. Within the Bluetooth menu, click on on the “Hook up with a System” button.
4. Your Macbook will seek for obtainable Bluetooth units. Choose “JBL 660NC” from the checklist.
5. As soon as the pairing course of is full, your JBL 660NC headphones will likely be related to your Macbook.
Optimizing Audio High quality
6. Alter the quantity in your Macbook to a cushty listening degree.
7. For those who expertise any audio high quality points, attempt restarting your Macbook and headphones.
8. For the very best audio high quality, use a high-quality audio cable to attach your JBL 660NC headphones to your Macbook. A high-quality cable will present a extra secure and dependable connection, leading to higher audio high quality.
| Connection Technique | Professionals | Cons |
|---|---|---|
| Bluetooth | Wi-fi, handy | Might expertise latency, decrease audio high quality |
| 3.5mm Audio Cable | Secure, dependable, excessive audio high quality | Wired, much less handy |
Managing the Bluetooth Connection
After efficiently pairing your JBL 660NC headphones together with your MacBook, you could must handle the Bluetooth connection in sure conditions. Listed below are some eventualities and their resolutions:
1. Reconnecting to Your MacBook:
For those who transfer out of vary or flip off your headphones, they may mechanically reconnect to your MacBook as soon as they arrive again inside vary and are turned on.
2. Manually Connecting or Disconnecting:
You possibly can manually join or disconnect your headphones from the Bluetooth menu within the macOS menu bar.
3. Troubleshooting Connection Points:
For those who encounter any connection issues, attempt the next steps:
| Challenge | Answer |
|---|---|
| Headphones not connecting | Guarantee each the headphones and your MacBook have Bluetooth enabled and are discoverable. |
| Audio slicing out or lagging | Transfer nearer to your MacBook and examine for obstructions or interference. |
| Headphones not displaying within the Bluetooth menu | Restart your headphones and your MacBook. |
4. Renaming Your Headphones:
You possibly can customise the identify that seems within the Bluetooth menu for simple identification.
5. Forgetting a Bluetooth Connection:
If you wish to completely take away a saved Bluetooth connection, you possibly can “overlook” it from the Bluetooth menu.
6. Precedence Order of Related Units:
macOS manages the precedence of related Bluetooth units. You possibly can modify the precedence within the Bluetooth menu.
7. Disabling Bluetooth:
To quickly disable Bluetooth in your MacBook, use the Bluetooth menu or the Management Heart.
8. Troubleshooting Superior Points:
For those who expertise persistent Bluetooth issues, contemplate resetting the Bluetooth module in your MacBook or contacting Apple assist.
9. Checking System Preferences:
In case of ongoing connection points, double-check the Bluetooth settings in System Preferences to make sure every part is configured accurately.
10. Further Troubleshooting Suggestions:
Restart your headphones and MacBook to reset the Bluetooth connection. Test for software program updates in your macOS and headphones. Disable any VPN or antivirus software program that will intrude with Bluetooth performance. Reset the Bluetooth module in your MacBook by eradicating the Bluetooth.plist file from the ~/Library/Preferences folder.
How To Join My Jbl 660nc To My Macbook
To attach your JBL 660NC headphones to your Macbook, comply with these steps:
- Be sure that your headphones are turned on and in pairing mode. The LED mild on the headphones will flash blue and white when they’re in pairing mode.
- Open the Bluetooth settings in your Macbook. You are able to do this by clicking on the Apple menu and choosing “System Preferences.” Then, click on on “Bluetooth.”
- Click on on the “Pair” button subsequent to the identify of your headphones. The LED mild on the headphones will flip strong blue when they’re related to your Macbook.
Individuals Additionally Ask
How do I reset my JBL 660NC headphones?
To reset your JBL 660NC headphones, press and maintain the facility button and the quantity down button for 10 seconds. The LED mild on the headphones will flash purple and white when the headphones are reset.
How do I replace the firmware on my JBL 660NC headphones?
To replace the firmware in your JBL 660NC headphones, you will have to obtain the JBL Headphones app from the App Retailer. After getting put in the app, open it and join your headphones to your iPhone or iPad. The app will mechanically examine for updates and immediate you to put in them if any can be found.
How do I flip off the noise cancellation on my JBL 660NC headphones?
To show off the noise cancellation in your JBL 660NC headphones, press the NC button on the left ear cup. The LED mild on the headphones will flip inexperienced when the noise cancellation is turned off.
