Understanding the intricacies of a firearm is essential for each security and effectivity. With regards to sustaining and dealing with a Glock 19, disassembly is a vital ability that enables for correct cleansing, inspection, and restore. Whether or not you are an skilled gun proprietor or a novice firearm fanatic, studying the correct手順 for disassembling your Glock is crucial for its secure and dependable operation.
Earlier than embarking on the disassembly course of, be certain that the firearm is unloaded and the journal is eliminated. Security ought to all the time be paramount, and this contains double-checking the weapon’s standing earlier than dealing with it. Find the disassembly lever on the left aspect of the body and depress it downward utilizing your index finger. Concurrently, use your different hand to tug the slide again barely till it aligns with the disassembly notch. As soon as the slide is in place, launch the disassembly lever and punctiliously separate the slide from the body.
With the slide eliminated, now you can entry the barrel and different inside parts. Depress the barrel lug on the underside of the barrel and tilt the barrel upward. Gently slide the barrel ahead and out of the slide. Subsequent, examine the locking block and ejector for any particles or fouling. To take away the set off meeting, depress the set off and pull it ahead till it disengages from the body. Lastly, detach the slide cease lever and firing pin security by pushing them out from the proper aspect of the body. By following these steps meticulously, you should have efficiently disassembled your Glock 19 for cleansing, upkeep, or restore.
Security First: Getting ready for Disassembly
Earlier than embarking on the disassembly course of, it’s paramount to prioritize security. This entails adhering to a number of crucial measures to mitigate any potential dangers.
At all times be certain that the firearm is unloaded by eradicating the journal and visually inspecting the chamber to substantiate the absence of a spherical. This step is non-negotiable for security.
Select a secure and well-lit work space away from foot site visitors or potential distractions. Inform others that you’ll be engaged on the firearm to keep away from surprises.
Put on acceptable eye safety, corresponding to security glasses or goggles, to forestall eye accidents from potential particles.
Earlier than disassembly, completely examine the firearm to make sure there aren’t any obstructions or overseas objects current. It will stop injury through the disassembly course of.
Eradicating the Barrel and Recoil Spring Meeting
1. Lock the Slide to the Rear
Grasp the slide from either side, pull it to the rear, and let it go ahead simply sufficient to have interaction the slide cease. Make sure the slide stays locked to the rear by urgent the slide cease lever down along with your thumb.
2. Depress the Takedown Lever
Find the small, rectangular takedown lever on the left aspect of the body, simply above the set off guard. Press the lever down and maintain it in place.
3. Take away the Slide
Whereas holding down the takedown lever, grasp the slide from either side and slowly pull it ahead off the body. The recoil spring meeting will come out with the slide. Maintain the recoil spring meeting in place to forestall it from flying out.
Subsection 3: Detailed Clarification of Recoil Spring Meeting Removing
The recoil spring meeting is an important element of the Glock 19’s operation. It absorbs recoil and helps return the slide to its authentic place after every shot. Here is learn how to take away it safely and effectively:
| Step | Description |
|---|---|
| 1 | Grasp the uncovered portion of the recoil spring meeting along with your fingers. |
| 2 | Pull the recoil spring meeting straight up and out of the slide. |
| 3 | The barrel is now uncovered and may be eliminated by pulling it ahead off the slide. |
Eradicating the Extractor and Spring
To take away the extractor and spring, you have to to take away the slide cease lever first. To do that, rotate the slide cease lever down till it’s flush with the slide. Push the slide ahead on the body barely and raise the rear of the slide up. The slide will pivot down and ahead on the body. Pull the set off and maintain it within the rearward place. Push the slide ahead once more and raise all of it the best way off of the body. The extractor and spring at the moment are uncovered.
To take away the extractor, press down on the extractor depressor along with your fingernail or a small software. The extractor will pivot down and away from the spring. Elevate the extractor out of the slide. Elevate the extractor spring out of the slide.
| Half | Function |
|---|---|
| Extractor | Extracts spent rounds from the chamber |
| Extractor Spring | Offers stress for the extractor |
To reassemble the extractor and spring, insert the extractor spring into the slide. Insert the extractor into the slide and pivot it down into place. Push down on the extractor depressor and slide the extractor spring into place.
Unintentional Slide Launch
If the slide launch lever is pressed unintentionally throughout disassembly, the slide is not going to absolutely interact with the body. To repair this, merely launch the slide launch lever and pull the slide again all the best way till it locks into place.
Slide Caught on Body
If the slide is caught on the body, it could be as a result of particles or a worn slide cease. Examine the slide cease and body for any obstructions and clear them if crucial. If the slide continues to be caught, you might want to make use of a rubber mallet to softly faucet the slide ahead till it comes free.
Incorrect Reassembly
If the slide doesn’t transfer easily if you reassemble it, it could be as a result of incorrect reassembly. Test that the recoil spring is correctly seated within the body and that the slide launch lever is engaged. Additionally, be certain that the ejector is correctly aligned and that the firing pin just isn’t obstructed.
Journal Catch Not Participating
If the journal catch just isn’t partaking, it could be as a result of a worn journal catch spring. Substitute the spring with a brand new one and be certain that the journal catch is correctly seated within the body.
Slide Not Locking Again
If the slide just isn’t locking again after the final spherical is fired, it could be as a result of a worn slide cease or ejector. Examine these parts and exchange them if crucial. You also needs to verify that the recoil spring just isn’t worn or broken.
Extractor Not Holding Spherical
If the extractor just isn’t holding the spherical correctly, it could be as a result of a worn extractor or a broken cartridge rim. Examine the extractor and cartridge rim and exchange them if crucial.
Mushroomed Firing Pin
If the firing pin is mushroomed, it could be as a result of improper primer seating or a worn firing pin. Substitute the firing pin with a brand new one and be certain that the primer is correctly seated within the cartridge case.
Set off Not Resetting
If the set off just isn’t resetting, it could be as a result of a worn or damaged set off spring. Substitute the set off spring with a brand new one and be certain that the set off is correctly seated within the body.
Unsafe Drop Check
At all times hold the muzzle pointed in a secure route when performing the unsafe drop check. Be certain that the firearm is evident and unloaded earlier than testing.
Significance of Protecting Your Glock Clear
Sustaining a clear Glock is essential for each its reliability and longevity. Common cleansing removes grime, particles, and fouling that may accumulate throughout use, making certain easy operation and stopping malfunctions. A well-maintained Glock will carry out at its greatest, offering you with the boldness and reliability you want in any state of affairs.
To correctly disassemble your Glock 19, observe these steps:
Step 1: Security First
Be certain that the gun is unloaded and pointed in a secure route.
Step 2: Take away the Journal
Depress the journal launch button and take away the journal.
Step 3: Lock the Slide
Pull the slide again barely and interact the slide lock lever.
Step 4: Take away the Barrel
With the slide locked again, rotate the barrel cam clockwise and take away the barrel.
Step 5: Take away the Slide
Tilt the firearm to a 45-degree angle and pull the slide ahead off the body.
Step 6: Take away the Recoil Spring Meeting
Grasp the recoil spring meeting and pull it out of the slide.
Step 7: Take away the Firing Pin Meeting
Push the firing pin by the rear of the slide and take away it.
Step 8: Take away the Ejector
Press the ejector pin and slide the ejector out of the slide.
Step 9: Take away the Extractor
Push the extractor depressor and raise the extractor out of the slide.
Step 10: Take away the Firing Pin Retaining Plate and Firing Pin Spring
- Utilizing a small screwdriver, slowly push out the firing pin retaining plate.
- Be aware the place of the firing pin spring and take away it rigorously.
- Be cautious to not lose the retaining plate or spring.
Step 11: Clear and Examine
Clear all parts completely with a correct cleansing answer. Examine for any indicators of damage or injury.
Step 12: Reassemble
Reverse the steps to reassemble the Glock 19, making certain all parts are appropriately positioned.
How one can Disassemble Glock 19
Disassembling your Glock 19 is a comparatively easy course of that may be accomplished in only a few minutes. By following these steps, you’ll be able to be certain that your firearm is correctly maintained and functioning appropriately.
- Unload the firearm. Be certain that the firearm is unloaded by eradicating the journal and visually inspecting the chamber.
- Lock the slide again. Pull the slide again and interact the slide lock.
- Take away the takedown lever. Rotate the takedown lever down and take away it from the body.
- Separate the slide from the body. Maintain the firearm the wrong way up and grip the slide and body firmly. Push the slide ahead barely and raise it up and off the body.
- Take away the barrel. Grip the barrel hood and pull it ahead and out of the slide.
- Take away the recoil spring meeting. Grip the recoil spring meeting and pull it ahead and out of the slide.
- Reassemble the firearm. Reverse the steps above to reassemble the firearm.
Folks Additionally Ask About How one can Disassemble Glock 19
What instruments do I must disassemble a Glock 19?
You’ll need the next instruments to disassemble a Glock 19:
- A Glock armorer’s software or a small flathead screwdriver
- A small punch
