Instruments and Supplies Required
Specialised Gear
To efficiently mount a free-float handguard in your AR10, you’ll require just a few specialised items of apparatus. These instruments are essential for making certain a safe and exact set up:
- Armorer’s Bench Block: This heavy-duty bench block supplies a steady and safe platform in your AR10 higher receiver throughout the set up course of.
- Torque Wrench: A torque wrench is crucial for tightening the barrel nut and different elements to the desired torque values, making certain correct alignment and optimum efficiency.
- Punch Set: A set of punches, together with a roll pin punch and a citadel nut wrench, is required for eradicating and putting in sure elements throughout the handguard set up.
- Channel Lock Pliers: Channel lock pliers are versatile instruments used for gripping and adjusting varied elements, such because the barrel nut and muzzle system, throughout the set up course of.
- Adjustable Wrench: An adjustable wrench is useful for loosening and tightening nuts and bolts that won’t match a normal socket wrench.
Supplies
Along with the specialised tools, you will have the next supplies for the free-float handguard set up:
- Free-float handguard
- Barrel nut
- Barrel nut wrench
- Shims (optionally available)
- Loctite (optionally available)
Guarantee you could have all the mandatory instruments and supplies earlier than starting the set up course of to keep away from interruptions or delays.
Eradicating the Authentic Handguard
Earlier than you possibly can change your authentic handguard with a free-float handguard, you could take away the unique handguard. This is do it:
1. Unload the firearm and clear the chamber.
2. Take away the gasoline block and gasoline tube.
To take away the gasoline block, you will have a gasoline block wrench. Place the wrench over the gasoline block and switch it counterclockwise to loosen it. As soon as the gasoline block is unfastened, you possibly can take away it from the barrel. You should use a punch or a small screwdriver to take away the gasoline tube from the gasoline block.
| Instruments Required: | |
|---|---|
| Gasoline block wrench | |
| Punch or small screwdriver |
3. Take away the handguard cap.
The handguard cap is positioned on the entrance of the handguard. It’s normally held in place by a screw or a pin. Take away the screw or pin to take away the handguard cap.
| Instruments Required: | |
|---|---|
| Screwdriver or pin punch |
4. Slide the handguard off the barrel.
As soon as the handguard cap is eliminated, you possibly can slide the handguard off the barrel.
Putting in the Barrel Nut
The barrel nut is a essential element in securing the handguard to the higher receiver. It’s accountable for transferring the load from the handguard to the receiver and making certain a strong and steady connection. To put in the barrel nut, comply with these steps:
-
Clear the threads: Use a material or brush to take away any filth or particles from the threads on the higher receiver and barrel nut.
-
Apply thread locker: Apply a small quantity of high-strength thread locker to the threads on the higher receiver. This can assist to safe the barrel nut and stop it from loosening below recoil.
-
Thread on the barrel nut: Fastidiously thread the barrel nut onto the higher receiver. Use a torque wrench to tighten the barrel nut to the producer’s specified torque. The torque worth will range relying on the particular handguard and barrel nut mixture, so seek the advice of the producer’s directions.
Tightening the Barrel Nut
Tightening the barrel nut is a vital step in making certain the correct set up and safety of the handguard. This is an in depth rationalization of tighten the barrel nut:
-
Use a torque wrench: To make sure exact and managed tightening, it is important to make use of a torque wrench. Discuss with the producer’s directions for the particular torque worth required in your handguard and barrel nut mixture.
-
Tighten in a star sample: Divide the barrel nut into 4 or six equal sections. Start tightening the bolts evenly, ranging from one bolt and skipping to the other bolt to stop any twisting or warping of the barrel nut.
-
Gradual tightening: Tighten the bolts in small increments, progressively rising the torque to the desired worth. By tightening in levels, you permit the barrel nut to settle and guarantee even distribution of rigidity.
-
Double-check: As soon as you’ve got reached the desired torque, double-check the tightness of the bolts to ensure they’re adequately secured. If any of the bolts have loosened, re-tighten them to the right torque.
| Tightening Sequence | Description |
|---|---|
| Step 1: Tighten Bolt 1 | Begin by tightening the primary bolt positioned on the 12 o’clock place |
| Step 2: Skip to Reverse Bolt | Transfer to the 6 o’clock place and tighten the bolt positioned instantly reverse |
| Step 3: Tighten Alternate Bolts | Proceed alternating, tightening bolts on the 3 o’clock, 9 o’clock, 12 o’clock, and 6 o’clock positions |
Aligning the Handguard
1. Place the Handguard
Place the handguard over the barrel nut and align it with the higher receiver. Make sure the handguard is centered and the gasoline tube is correctly aligned via the gasoline block.
2. Tighten the Barrel Nut
Utilizing a torque wrench, tighten the barrel nut to the desired torque. Discuss with the producer’s directions for the exact torque worth. Watch out to not overtighten, as this may injury the handguard or barrel nut.
3. Align the Gasoline Block
If the gasoline block is just not already aligned, use a punch or different appropriate software to softly faucet it till it aligns with the gasoline tube and gasoline port. Tighten the gasoline block screws securely.
4. Guarantee Correct Alignment
* Use a Degree: Place a stage on the handguard and higher receiver to test for levelness. Alter the handguard as wanted to make sure it’s parallel to the receiver.
* Confirm Gasoline Tube Alignment: The gasoline tube ought to run straight via the gasoline block and enter the gasoline key of the bolt provider group with none bends or kinks. Examine the gasoline tube alignment to make sure correct perform.
* Clock the Handguard: Rotate the handguard till it’s correctly aligned with any equipment or rails which may be hooked up. Use a torque wrench to safe the handguard in place.
| Alignment Checks | Methodology |
|---|---|
| Levelness | Use a stage |
| Gasoline Tube Alignment | Examine visually |
| Clocking | Rotate and torque |
Tightening the Barrel Nut
Correctly tightening the barrel nut is essential to make sure a safe and useful free float handguard. Comply with these detailed steps to realize the specified torque:
5. Last Torque Verify
As soon as the barrel nut is absolutely hand-tightened, it is important to confirm the ultimate torque. To do that:
- Use a torque wrench suitable with the barrel nut’s particular torque necessities (normally laid out in foot-pounds or Newton-meters).
- Make sure the torque wrench is correctly calibrated for accuracy.
- Safe the higher receiver in a vise or different steady floor to stop it from shifting throughout the torque course of.
- Insert the torque wrench’s socket onto the barrel nut.
- Slowly and progressively apply torque to the barrel nut, following the desired torque worth. Don’t overtighten or rush the method.
- As soon as the specified torque is reached, the torque wrench will sometimes “click on” or launch, indicating that the barrel nut is appropriately tightened.
| Torque Vary for AR-10 Barrel Nuts |
|---|
| 50-70 ft-lbs (foot-pounds) or 68-95 N-m (Newton-meters) |
Verifying Alignment
As soon as the handguard is put in, it is essential to confirm its alignment with the receiver. This ensures that the barrel, bolt provider group, and different elements are correctly aligned for optimum perform. This is an in depth information on test alignment:
1. Examine the Sight Image
Wanting via the optic, goal at a set goal. Word the place of the reticle in relation to the goal. If the reticle is centered and steady, it signifies good alignment.
2. Verify Handguard Peak
Place a straight edge (e.g., a carpenter’s stage or ruler) alongside the highest of the handguard and the receiver. Be certain that each surfaces are stage. Any discrepancies in top might point out an alignment situation.
3. Study Barrel Alignment
With the bolt provider eliminated, insert a cleansing rod into the barrel. Utilizing a mallet or hammer, gently faucet the rod downward to align it with the gasoline tube. Observe the rod’s alignment with the bore of the barrel. In the event that they’re parallel, the barrel is appropriately aligned.
4. Verify Gasoline Tube Alignment
Extending the cleansing rod via the gasoline tube, observe its alignment with the gasoline port on the barrel. Once more, the rod needs to be parallel to the bore of the barrel, indicating correct alignment.
5. Tighten Handguard Screws
As soon as the alignment is passable, firmly tighten the handguard screws. Use a torque wrench to make sure correct torque specs, stopping loosening or overtightening.
6. Re-check Alignment
After tightening the screws, re-check the alignment utilizing the strategies described above. Make any obligatory changes to make sure optimum alignment. Rerun the alignment checks a number of occasions to make sure consistency and stop subsequent points.
| Alignment Verify | Methodology |
|---|---|
| Sight Image | Intention via optic; notice reticle place |
| Handguard Peak | Use straight edge to stage handguard with receiver |
| Barrel Alignment | Insert cleansing rod into barrel; faucet to align with gasoline tube |
| Gasoline Tube Alignment | Insert cleansing rod into gasoline tube; observe alignment with gasoline port |
| Screws | Tighten screws to torque specs |
| Re-check | Rerun alignment checks a number of occasions |
Putting in the Handguard Rail
1. **Take away the present handguard.** This may increasingly require eradicating the gasoline block or entrance sight base.
2. **Clear the barrel nut.** Use a solvent and brush to take away any filth or particles.
3. **Apply thread locker to the barrel nut.** This can assist to maintain the nut in place.
4. **Set up the barrel nut.** Use a torque wrench to tighten the nut to the desired torque.
5. **Set up the handguard rail.** Slide the rail onto the barrel nut and tighten the screws.
6. **Set up the gasoline block or entrance sight base if obligatory.**
7. **Take a look at the perform of the handguard rail.** Ensure that the rail is securely hooked up and that it doesn’t intrude with the operation of the rifle.
Extra Data for Step 7: Testing the Operate of the Handguard Rail
To make sure the correct performance of your newly mounted free-float handguard, conduct the next checks:
| Take a look at | Process |
|---|---|
| Rail Safety | Grasp the handguard firmly and try and wiggle or twist it. |
| Element Interference | Place the rifle in a number of firing positions and test for any contact between the handguard and different elements, such because the barrel, gasoline block, or suppressor. |
| Zero Shift | Securely mount the rifle and hearth just a few rounds at a goal. Examine the purpose of affect with the zero beforehand established earlier than the handguard set up. |
By finishing these exams, you possibly can confirm that your free-float handguard is securely mounted, is not going to intrude with the rifle’s perform, and has not considerably altered the zero level.
Securing the Handguard
As soon as the barrel nut is absolutely tightened, it is time to safe the handguard onto the receiver. Most free-float handguards use a proprietary mounting system that consists of a barrel nut, a handguard, and a collection of screws or bolts.
To safe the handguard, comply with these steps:
- Apply a small quantity of threadlocker to the threads of the screws or bolts.
- Align the handguard with the receiver and slide it onto the barrel nut.
- Tighten the screws or bolts evenly till they’re comfortable.
- Verify to ensure that the handguard is safe and that there isn’t any play or wobble.
- If the handguard is just not safe, tighten the screws or bolts additional.
- As soon as the handguard is safe, you possibly can set up your required equipment, akin to rails, grips, and bipods.
Here’s a desk summarizing the steps for securing the handguard:
| Step | Description |
|---|---|
| 1 | Apply threadlocker to the threads of the screws or bolts. |
| 2 | Align the handguard with the receiver and slide it onto the barrel nut. |
| 3 | Tighten the screws or bolts evenly till they’re comfortable. |
| 4 | Verify to ensure that the handguard is safe and that there isn’t any play or wobble. |
| 5 | If the handguard is just not safe, tighten the screws or bolts additional. |
| 6 | As soon as the handguard is safe, you possibly can set up your required equipment. |
Ideas for a Skilled Set up
1. Collect the Obligatory Instruments
- AR-10 receiver
- Free float handguard
- Barrel nut wrench
- Torque wrench
- Loctite threadlocker
- Anti-seize compound
2. Put together the Receiver
- Take away the higher receiver from the decrease receiver.
- Clear the receiver threads with a degreaser.
- Apply a small quantity of anti-seize compound to the receiver threads.
3. Set up the Barrel Nut
- Screw the barrel nut onto the receiver till it hand tightens.
- Use the barrel nut wrench to tighten the barrel nut in keeping with the producer’s specs.
4. Apply Loctite to the Barrel Nut
- Apply a small drop of Loctite threadlocker to the barrel nut threads.
- This can assist stop the barrel nut from loosening throughout use.
5. Set up the Handguard
- Slide the handguard over the barrel nut.
- Align the handguard with the receiver.
- Tighten the handguard screws utilizing the torque wrench in keeping with the producer’s specs.
6. Set up the Gasoline Block (Optionally available)
- In case your handguard requires a gasoline block to be put in, achieve this at this level.
- Comply with the producer’s directions for putting in the gasoline block.
7. Set up the Equipment
- Set up any desired equipment akin to rails, grips, or lights on the handguard.
- Use the supplied screws and instruments to safe the equipment.
8. Take a look at the Set up
- Reattach the higher receiver to the decrease receiver.
- Verify the alignment of the handguard with the receiver and equipment.
- Be certain that all screws and bolts are securely tightened.
9. Zero the Rifle
- If the rifle has been disassembled, it could must be zeroed once more.
- Use a boresighter or benchrest to regulate the rifle’s sights.
10. Preserve the Set up
- Clear the handguard and receiver threads with a degreaser periodically.
- Reapply anti-seize compound to the receiver threads as wanted.
- Verify the tightness of all screws and bolts frequently.
| Upkeep Schedule | Frequency |
|---|---|
| Clear and examine threads | Each 3-6 months |
| Reapply anti-seize compound | Each 12 months |
| Verify screw tightness | Each 6 months |
How To Mount Free Float Handguard AR10
To mount a free float handguard on an AR10, you will have the next instruments and supplies:
- A free float handguard
- A barrel nut wrench
- A torque wrench
- Blue Loctite
Upon getting gathered your instruments and supplies, you possibly can start the method of mounting the free float handguard.
- Begin by eradicating the present handguard from the rifle. To do that, use a barrel nut wrench to loosen the barrel nut.
- As soon as the barrel nut is unfastened, take away the present handguard from the rifle.
- Apply a small quantity of blue Loctite to the threads of the barrel nut.
- Thread the barrel nut onto the receiver and tighten it to the right torque specification utilizing a torque wrench.
- Slide the free float handguard onto the barrel nut and tighten the screws till they’re comfortable.
- Use a barrel nut wrench to tighten the barrel nut to the right torque specification.
- Lastly, test the tightness of the screws on the free float handguard and ensure that they’re all tight.
Your free float handguard is now mounted and able to use.
Individuals Additionally Ask
What’s a free float handguard?
A free float handguard is a sort of handguard that doesn’t come into contact with the barrel of the rifle. This permits the barrel to drift freely, which might enhance accuracy.
Why ought to I mount a free float handguard on my AR10?
There are a number of explanation why you would possibly wish to mount a free float handguard in your AR10. Free float handguards can enhance accuracy, present a extra comfy grip, and help you mount equipment extra simply.
How do I do know if my AR10 has a free float handguard?
You possibly can inform in case your AR10 has a free float handguard by wanting on the approach it’s mounted. If the handguard is hooked up to the barrel nut, then it’s not a free float handguard. If the handguard is hooked up to the receiver, then it’s a free float handguard.
