Mastering the artwork of sporting a durag can elevate your model sport and defend your hair. Nevertheless, attaining a flawless match and most consolation requires a method that ensures the durag stays safe with out inflicting discomfort. On this complete information, we’ll delve into the intricate steps concerned in placing on a durag, empowering you to rock this iconic headwear like a professional.
To start, collect your durag and place it with the tail ends dealing with in direction of you. The tail ends needs to be of equal size. Subsequent, drape the durag over your head, guaranteeing that the middle seam aligns with the crown of your head. The brow part ought to relaxation simply above your eyebrows. Now, firmly grasp the tail ends and produce them collectively on the nape of your neck, tying a safe knot.
The Ideally suited Durag
The perfect durag is a vital accent for anybody who desires to attain a classy and polished look. When selecting a durag, there are a number of elements to contemplate, together with the fabric, measurement, and elegance.
Materials
The fabric of your durag will decide its consolation, sturdiness, and skill to guard your hair. The commonest supplies for durags embrace:
- Silk: Silk durags are luxurious and cozy, however they are often costly and tough to take care of.
- Satin: Satin durags are smooth and glossy, and so they present good safety in your hair. Nevertheless, they are often slippery and will not keep in place in addition to different supplies.
- Cotton: Cotton durags are breathable and absorbent, making them a sensible choice for decent climate. Nevertheless, they’ll wrinkle simply and will not present as a lot safety in your hair as different supplies.
- Polyester: Polyester durags are sturdy and wrinkle-resistant, however they are often much less breathable than different supplies.
Materials | Consolation | Sturdiness | Safety | Value |
---|---|---|---|---|
Silk | Glorious | Good | Good | Excessive |
Satin | Good | Good | Good | Reasonable |
Cotton | Good | Truthful | Truthful | Low |
Polyester | Truthful | Glorious | Good | Low |
Safe Placement
To make sure a safe match, observe these steps:
1. Modify the Bandanna
Place the bandanna in your head, with the middle level aligned together with your brow. Tie the 2 ends collectively in the back of your head, leaving sufficient slack to cowl the again of your head and ears.
2. Create the Crown
Deliver the 2 tails of the bandanna to the highest of your head. Cross the left tail over the suitable tail and tuck it beneath the suitable tail. Cross the suitable tail over the left tail and tuck it beneath the left tail. Repeat this course of till the material varieties a safe crown form.
Steps | Description |
---|---|
1 | Place the bandanna in your head with the middle level aligned together with your brow. |
2 | Tie the 2 ends collectively in the back of your head, leaving sufficient slack to cowl the again of your head and ears. |
3 | Deliver the 2 tails of the bandanna to the highest of your head. |
4 | Cross the left tail over the suitable tail and tuck it beneath the suitable tail. |
5 | Cross the suitable tail over the left tail and tuck it beneath the left tail. |
6 | Repeat steps 4-5 till the material varieties a safe crown form. |
3. Safe the Tails
As soon as the crown is fashioned, tie the remaining tails of the bandanna collectively in the back of your head. Trim any extra material for a neat end.
Tying the Prime Knot
The highest knot is the important thing to attaining the proper durag look. Listed here are the steps to tie it securely and stylishly:
1. Collect the Extra Material
As soon as you have wrapped the durag round your head and tied the again, collect the surplus material on the prime.
2. Pull the Material Up and Over
Pull the gathered material up over the knot on the again. Make sure that the material covers your complete knot, making a easy and polished floor.
3. Double-Knot the Extra Material (Superior Method)
For a safer and flattering prime knot, you possibly can double-knot the surplus material. Here is how:
Step | Description |
---|---|
a. | Create a loop with the surplus material by pulling it by way of the knot. |
b. | Deliver the loop again over the knot and pull it by way of the outlet it created. |
c. | Tighten the double-knot by pulling on each ends of the loop. |
d. | Tuck the free ends into the durag for a clear end. |
4. Modify and Safe
As soon as the highest knot is tied, regulate it to take a seat comfortably on the crown of your head. Tuck in any free ends to make sure the knot stays safe and classy all day lengthy.
Tightening the Knot
Adjusting the tightness of your durag’s knot is essential for each consolation and safety. Here is a step-by-step information to attaining the proper knot:
1. Assess the Tail Size: Test the size of the durag’s tail. If it is too lengthy, it’s going to create an uncomfortable lump when tied. If it is too brief, it could not keep safe.
2. Fold the Tail: Fold the tail again over the durag’s physique, bringing the 2 uncooked edges collectively.
3. Tighten: Begin tightening the knot by pulling on the free ends which are hooked up to the durag’s physique. Keep away from pulling on the tail itself, as this may weaken it.
4. Discover Your Candy Spot: Steadily improve the tightness of the knot by persevering with to tug on the free ends. Do not overtighten to the purpose of discomfort, however guarantee it is cosy sufficient to remain in place.
Tip: For a firmer knot, fold the tail twice earlier than tightening it.
Tightness Information |
---|
Free: permits finger to suit beneath the knot |
Medium: cosy, however not uncomfortable |
Tight: very safe, however could trigger discomfort |
5. Ending Contact: As soon as the knot is tightened to your required degree, tuck the free ends beneath the knot for a neat end.
Appropriate Aspect Placement
The right aspect placement of a durag is essential to attain the specified match and elegance. Comply with these steps to make sure correct aspect placement:
-
Establish the Tail Aspect
Durags have an extended “tail” aspect that’s designed to hold down the again of the pinnacle. This aspect is usually product of a unique materials or have a unique sample.
-
Place the Durag
Place the durag in your head with the tail aspect dealing with the again. The middle of the durag ought to align with the middle of your brow.
-
Modify the Entrance
Wrap the entrance of the durag round your brow, smoothing out any wrinkles or creases. Ensure the match is cosy however not too tight.
-
Tie the Durag
Deliver the tail of the durag ahead and tie it right into a knot on the highest of your head. Alternatively, you need to use a bobby pin to safe the tail.
-
Test Symmetry
Make sure that the durag is symmetrical on either side. The tails ought to hold evenly down the again, and the perimeters ought to cowl the ears and temples.
Step | Description |
---|---|
1 | Establish the tail aspect |
2 | Place the durag |
3 | Modify the entrance |
4 | Tie the durag |
5 | Test symmetry |
Aligning the Tail
The ultimate step in placing on a durag is aligning the tail. This helps to safe the durag and forestall it from slipping off. To align the tail:
- Deliver the tail over the durag and wrap it round your head as soon as.
- Cross the tail over itself and produce it again over the durag.
- Tuck the tail beneath the durag and safe it with a bobby pin.
Extra Ideas
Listed here are some further suggestions for aligning the tail of your durag:
Tip | Description |
---|---|
Use a bobby pin to safe the tail | It will assist to maintain the durag in place and forestall it from slipping off. |
Cross the tail over itself | It will assist to create a tighter match and forestall the tail from coming free. |
Tuck the tail beneath the durag | It will assist to maintain the tail out of the best way and forestall it from getting caught on something. |
Trimming the Extra
The ultimate step in placing on a durag is to trim any extra material. It will assist the durag match snugly and maintain it from slipping off.
To trim the surplus, merely observe these steps:
1. Collect the surplus material in the back of the pinnacle.
2. Maintain the material with one hand and use scissors to trim the surplus.
3. Proceed trimming till the surplus material is eliminated.
4. Easy out the sides of the durag and regulate it for a cosy match.
Ideas for Trimming the Extra:
* Use sharp scissors to keep away from fraying the material.
* Trim the surplus rigorously, as you possibly can all the time reduce extra however you possibly can’t put it again on.
* In case you’re uncertain about how a lot to trim, err on the aspect of warning and trim much less.
* You can even use a lighter to barely burn the sides of the material to stop fraying.
Step | Description |
---|---|
1 | Collect the surplus material in the back of the pinnacle. |
2 | Maintain the material with one hand and use scissors to trim the surplus. |
3 | Proceed trimming till the surplus material is eliminated. |
4 | Easy out the sides of the durag and regulate it for a cosy match. |
Wrapping the Tail
The tail of the durag needs to be wrapped across the again of your head, masking the nape of your neck. To do that, observe these steps:
- Maintain the durag in place in your head, with the sides aligned on the entrance of your brow.
- Deliver the tail across the again of your head, crossing it over the middle of the durag.
- Wrap the tail across the base of your neck, masking the nape of your neck.
- Cross the tail over the opposite aspect of the durag, bringing it again to the entrance of your head.
- Tie the tail in a knot on the entrance of your head, securing it in place.
- Tighten the knot as desired, guaranteeing that the durag is cosy however not too tight.
- Tuck any extra material into the durag, smoothing out any wrinkles.
- Test if the durag is masking your head and neck correctly, and regulate as wanted.
Ideas for Wrapping the Tail
Tip | Purpose |
---|---|
Cross the tail over the middle of the durag | This helps maintain the durag in place and prevents it from slipping off. |
Wrap the tail across the base of your neck | This covers the nape of your neck and prevents hair from escaping. |
Tie the tail in a knot on the entrance of your head | This secures the durag and prevents it from coming free. |
Tighten the knot as desired | Modify the tightness to attain the specified degree of compression. |
Test if the durag is masking correctly | Make sure that the durag is masking your head and neck as supposed. |
Securing the Wrap
As soon as the durag is in place, it is time to safe it. That is the place the tying approach comes into play. There are a number of alternative ways to tie a durag, however the most typical is the “around-the-head” methodology.
Step-by-Step Directions:
1. Deliver the entrance tails again: Pull the 2 tails in entrance of your head in direction of the again of your neck.
2. Cross the tails: Cross the suitable tail over the left and tuck it behind your head.
3. Deliver the left tail again: Seize the left tail and produce it again over your head.
4. Tuck the left tail over: Tuck the left tail over and beneath the suitable tail.
5. Tighten the knot: Pull each tails to tighten the knot and safe the durag.
6. Modify the match: Modify the tightness of the knot as wanted for a cushty match.
7. Tuck within the ends: Tuck any free ends of the tails beneath the durag for a clear end.
8. Optionally available: Add a band or bandana: For additional safety, you possibly can add a band or bandana over the tied durag.
9. Superior Tying Strategies:
There are additionally extra superior tying methods that may present a tighter and extra personalized match. These methods contain utilizing a number of knots and wraps to create a safe maintain.
Contemplate consulting a barber or hairstylist for steerage on the best and cozy tying approach in your hair kind and desired look.
Perfecting the Durag
10. Modify the Match
The match of the durag is essential for each consolation and elegance. Begin by putting the center of the durag on the entrance of your head. Then, pull the again panel over your head and safe it with the ties in the back of your neck. Tie the ties securely, however not too tightly, to stop discomfort or complications.
Modify the match of the highest panel by rigorously folding it across the prime of your head. Be sure that it suits snugly however comfortably. The highest panel ought to cowl the crown of your head and the hairline round your brow.
11. Use a Dorag for Completely different Kinds
Durags can be utilized to create a wide range of types, from basic waves to trendy braids. To attain basic waves, wrap the durag tightly round your head and safe it with the ties. Depart the durag on for a number of hours or in a single day to permit the waves to set.
For braids, use a durag to carry your braids in place when you sleep or throughout the day. The durag will assist to stop frizz and maintain your braids trying neat and tidy.
12. Different Makes use of for Durags
Along with waves and braids, durags will also be used for a wide range of different functions. Durags can be utilized to guard your hair from the weather, comparable to wind, rain, or chilly. Durags will also be used to carry down a bandana or scarf, or to maintain your hair out of your face when you work or train.
Function | Use |
---|---|
Waves | Wrap the durag tightly round your head and safe it with the ties. Depart the durag on for a number of hours or in a single day. |
Braids | Use a durag to carry your braids in place when you sleep or throughout the day. |
Safety | Put on a durag to guard your hair from the weather, comparable to wind, rain, or chilly. |
Holding down a bandana | Place a bandana or scarf over your head and safe it with a durag. |
Hold hair out of your face | Wrap a durag round your head to maintain your hair out of your face when you work or train. |
Placed on a Durag
A durag is a sort of headwear that’s typically worn by individuals with curly or textured hair. Durags may help to guard the hair from injury and maintain it in place. They will also be used to create totally different types.
Listed here are the steps on placed on a durag:
- Begin by placing the durag in your head in order that the tail is hanging down your again.
- Tie the 2 strings collectively in the back of your head.
- Deliver the tail up over your head and tie it to the strings on the entrance of your head.
- Modify the durag in order that it’s comfy and safe.
Listed here are some suggestions for placing on a durag:
- Use a clear durag.
- Ensure your hair is dry earlier than placing on the durag.
- Don’t tie the durag too tightly.
- If you’re utilizing a durag to guard your hair from injury, put on it in a single day.
Folks Additionally Ask About Placed on a Durag
How do I do know what measurement durag to get?
Durags are available in a wide range of sizes. To seek out the suitable measurement for you, measure the circumference of your head. The durag needs to be cosy however not too tight.
How typically ought to I wash my durag?
Durags needs to be washed often, particularly if you’re sporting them in a single day. You possibly can wash them by hand or within the washer.
What are some alternative ways to model a durag?
There are various alternative ways to model a durag. You possibly can put on it with the tail hanging down your again, or you possibly can tie it up in a bun or ponytail. You can even use a durag to create totally different designs.