Whether or not you’ve gotten by accident hooked up the improper desk to your Lenovo laptop computer or should you merely need to change it out for a brand new one, eradicating the desk is a comparatively simple process. The steps could differ barely relying on the precise mannequin of Lenovo laptop computer you’ve gotten, however the common course of is similar. On this information, we’ll give you detailed directions on learn how to take away the desk out of your Lenovo laptop computer safely and effectively.
To start, make it possible for your Lenovo laptop computer is turned off and disconnected from any energy supply. Subsequent, find the small screws which might be securing the desk to the laptop computer. These screws are sometimes positioned on the underside of the laptop computer, close to the hinge. After you have positioned the screws, use a Phillips head screwdriver to take away them. Watch out to not overtighten the screws, as this might injury the laptop computer.
As soon as the screws have been eliminated, you possibly can gently carry the desk away from the laptop computer. Watch out to not pull too laborious, as you may injury the laptop computer’s display or different parts. If the desk is caught, you should use a skinny object, comparable to a bank card or a plastic spudger, to softly pry it unfastened. As soon as the desk has been eliminated, you possibly can substitute it with a brand new one or just depart it off.
Establish the Lenovo Desk One
The Lenovo Desk One is a small, moveable desktop pc designed for fundamental computing duties. It’s sometimes utilized in dwelling places of work, academic settings, and different environments the place area is proscribed. The Desk One is characterised by its compact measurement, which measures roughly 6.7 inches by 6.7 inches by 1.2 inches. It additionally encompasses a smooth and fashionable design with a matte black end.
Options of the Lenovo Desk One:
The Desk One presents a number of notable options, together with:
Processor:
The Desk One is powered by an Intel Celeron N5095 processor, which supplies enough efficiency for fundamental computing duties comparable to net searching, electronic mail, and doc modifying.
Reminiscence:
The system comes with 8GB of LPDDR4X reminiscence, offering enough multitasking capabilities and making certain clean operation.
Storage:
It has a 256GB solid-state drive (SSD) for storage, providing quick boot occasions and fast entry to functions and recordsdata.
Collect Vital Supplies
Earlier than you start, collect the required instruments and supplies:
Instruments
- Phillips #2 screwdriver
- Flathead screwdriver
- Torx T15 screwdriver
- Plastic pry software (non-compulsory)
Supplies
- New desk one substitute
- Anti-static wrist strap (really helpful)
- Isopropyl alcohol
- Cotton swabs
Disconnecting Cables
After you have gathered the required supplies, find the cables linked to desk one. These cables could embody:
| Cable Sort | Location |
|---|---|
| Energy | Again of desk one |
| Information | Entrance of desk one |
| Audio (non-compulsory) | Entrance of desk one |
Disconnect all cables by gently pulling on the connectors. Deal with the cables with care to keep away from injury.
Disconnect Cables and Peripherals
Earlier than you start the disassembly course of, it is important to disconnect all cables and peripherals linked to the Lenovo Desk One. This contains energy cords, video cables, USB units, and another exterior units.
Step-by-Step Information to Disconnecting Cables and Peripherals:
- Disconnect the cables. Disconnect all cables connecting the Desk One to the pc, together with the facility cable, USB cable, and another cables.
- Take away the screws. Use a Phillips head screwdriver to take away the 4 screws that safe the Desk One to the desk.
- Elevate the Desk One off the desk. Fastidiously carry the Desk One off the desk, being cautious to not injury the desk or the Desk One.
- Place the Desk One in a protected location. Place the Desk One in a protected location the place it is not going to be broken.
- Take away the Desk One from the pc. To take away the Desk One from the pc, comply with these steps:
- Open the Gadget Supervisor.
- Within the Gadget Supervisor, increase the "Common Serial Bus controllers" class.
- Proper-click on the "Lenovo Desk One" system and choose "Uninstall system".
- Within the affirmation dialog field, click on "OK" to uninstall the system.
- Find the 2 plastic tabs on the again of every bracket.
- Use a small screwdriver or your fingernail to push the tabs inward.
- Whereas holding the tabs inward, pull the bracket away from the faceplate.
- Repeat steps 1-3 for the opposite bracket.
- Find the 2 launch latches on the entrance of the tray.
- Press and maintain each launch latches concurrently.
- Pull the tray in the direction of you to take away it from the unit.
- To reinsert the tray, align the tray with the unit and slide it again into place till it clicks into place.
- A can of compressed air
- A gentle material
- A vacuum cleaner
- Align the entrance panel meeting with the system unit, making certain that the I/O protect is correctly seated within the rear of the case.
- Use the screws supplied to safe the entrance panel meeting to the chassis. Sometimes, there are two or 4 screws to tighten.
- Join the facility swap, reset swap, and HDD LED cables to their respective headers on the motherboard.
- Join the USB 3.0 header on the entrance panel meeting to the USB 3.0 header on the motherboard.
- Join the audio header on the entrance panel meeting to the audio header on the motherboard.
- Find the cables and peripherals that have been linked to Desk One. These could embody energy cables, knowledge cables, and USB cables.
- Disconnect the cables and peripherals from Desk One.
- Join the cables and peripherals to the brand new Desk One.
- Energy on the brand new Desk One and confirm that the cables and peripherals are working correctly.
- Be sure that the cables are correctly seated within the ports on each the Desk One and the peripherals.
- If you’re utilizing USB cables, make it possible for they’re correctly seated within the USB ports on each the Desk One and the peripherals.
- If you’re utilizing energy cables, make it possible for they’re correctly seated within the energy retailers on each the Desk One and the peripherals.
- If you’re having hassle connecting a cable or peripheral, check with the documentation that got here with the system.
- If you’re having hassle connecting a cable or peripheral, attempt reseating it. This implies unplugging the cable or peripheral after which plugging it again in.
- If you’re nonetheless having hassle connecting a cable or peripheral, attempt utilizing a special cable or port.
- If you’re nonetheless having hassle, check with the documentation that got here with the system or contact Lenovo help.
- Energy off the laptop computer.
- Disconnect all cables.
- Flip the laptop computer over.
- Find the 2 screws that safe the Desk One to the laptop computer.
- Use a Phillips-head screwdriver to take away the screws.
- Elevate the Desk One away from the laptop computer.
| Step | Motion |
|---|---|
| 1 | Find and disconnect the facility wire from the again of the pc. |
| 2 | Unplug any video cables (e.g., HDMI, DisplayPort) from the pc and monitor. |
| 3 | Take away all USB units, together with keyboards, mice, exterior drives, and another USB-connected peripherals. |
| 4 | Disconnect another cables or peripherals, comparable to audio cables, community cables, or printers. |
By following these steps, you make sure that all exterior connections are eliminated, permitting you to soundly proceed with the disassembly of the Lenovo Desk One.
Take away Entrance Panel
Unplug all of the cables from the again of the pc. Open the entrance panel by urgent the latch positioned on the high of the panel. Fastidiously take away the entrance panel and place it apart.
Drives
Eradicating Exhausting Drives
Find the laborious drives within the entrance of the pc. Take away the screws that safe the laborious drive in place. Fastidiously slide the laborious drive out of its bay. Repeat this course of for any extra laborious drives that have to be eliminated.
Eradicating Optical Drives
Find the optical drive within the entrance of the pc. Launch the drive utilizing the eject button or a paperclip inserted into the eject gap. As soon as the drive is ejected, rigorously pull it out of its bay. Repeat this course of for any extra optical drives that have to be eliminated.
Eradicating Floppy Drives
Find the floppy drive within the entrance of the pc. Take away the screws that safe the drive in place. Slide the drive out of its bay. Repeat this course of for any extra floppy drives that have to be eliminated.
Unmount the Desk One
To unmount the Desk One, comply with these steps:
Take away the Desk One Brackets
The Desk One brackets are the 2 plastic items that connect the desk to the faceplate. To take away them, comply with these steps:
Step-by-Step Information to Eradicating the Desk One Brackets
| Step | Motion |
|---|---|
| 1 | Find the 2 plastic tabs on the again of every bracket. |
| 2 | Use a small screwdriver or your fingernail to push the tabs inward. |
| 3 | Whereas holding the tabs inward, pull the bracket away from the faceplate. |
| 4 | Repeat steps 1-3 for the opposite bracket. |
Notice: If the tabs are tough to push inward, you should use a pair of pliers or tweezers to grip the tabs and pull them out.
Take away the Desk One Tray
To take away the Desk One tray, comply with these steps:
Extra Data
Listed below are some extra particulars which may be useful when eradicating the Desk One tray:
* If the tray is caught, chances are you’ll want to make use of a flat-head screwdriver or different skinny object to softly pry the discharge latches open.
* As soon as the tray is eliminated, you’ll have entry to the interior parts of the unit, together with the laborious drive, reminiscence, and different parts.
* Please deal with the tray with care to keep away from damaging the unit or its parts.
| Step | Motion |
|—|—|
| 1 | Find the 2 launch latches on the entrance of the tray. |
| 2 | Press and maintain each launch latches concurrently. |
| 3 | Pull the tray in the direction of you to take away it from the unit. |
| 4 | To reinsert the tray, align the tray with the unit and slide it again into place till it clicks into place. |
Clear the System Unit
The system unit is the principle a part of your pc and it comprises all the necessary parts, such because the motherboard, CPU, and RAM. It is necessary to maintain the system unit clear to forestall mud and grime from increase and inflicting issues. Listed below are the steps on learn how to clear the system unit:
1. Collect your supplies.
You’ll need a couple of gadgets to scrub the system unit, together with:
2. Energy down the pc and unplug it from the facility outlet.
That is necessary to forestall any injury to the pc.
3. Open the case.
Most pc circumstances have facet panels that may be eliminated by unscrewing a couple of screws. As soon as the facet panel is eliminated, you’ll have entry to the within of the system unit.
4. Take away the mud.
Use the can of compressed air to blow the mud off of the parts contained in the system unit. You’ll want to get into all the nooks and crannies. You may also use a gentle material to wipe away any mud that’s left behind.
5. Vacuum the within of the system unit.
Use the vacuum cleaner to take away any remaining mud or grime from the within of the system unit. Watch out to not injury any of the parts.
6. Reinstall the facet panel.
After you have cleaned the within of the system unit, reinstall the facet panel and tighten the screws.
7. Plug the pc again in and energy it on.
Your pc ought to now be clear and freed from mud and grime.
8. Clear the followers.
The followers in your pc assist to maintain it cool. Over time, mud and grime can construct up on the followers, which may make them much less efficient. It is necessary to scrub the followers commonly to make sure that your pc stays cool.
To wash the followers, use the can of compressed air to blow the mud off of them. You may also use a gentle material to wipe away any mud that’s left behind.
| Fan Location | Methods to Clear |
|---|---|
| CPU fan | Use the can of compressed air to blow the mud off of the fan blades. Watch out to not contact the fan blades along with your fingers. |
| Case followers | Use the can of compressed air to blow the mud off of the fan blades. You may also use a gentle material to wipe away any mud that’s left behind. |
| Graphics card fan | Use the can of compressed air to blow the mud off of the fan blades. Watch out to not contact the fan blades along with your fingers. |
Reassemble the System Unit
9. Join the Entrance Panel Meeting
The next desk supplies a abstract of the entrance panel meeting connections:
| Connector | Motherboard Header |
|---|---|
| Energy Swap | PWRBTN |
| Reset Swap | RSTBTN |
| HDD LED | HDDLED |
| USB 3.0 | USB3.0 |
| Audio | AUD_F_HD |
Reconnect Cables and Peripherals
After you have eliminated Desk One from the Lenovo system, you will want to reconnect the cables and peripherals that have been beforehand linked to it. Listed below are the steps to comply with:
Issues to Take into account When Reconnecting Cables and Peripherals
Troubleshooting Reconnection Points
Methods to Take away Desk One on Lenovo Laptops
To take away the Desk One accent from a Lenovo laptop computer, comply with these steps:
Folks Additionally Ask
What’s Desk One?
Desk One is an exterior keyboard and trackpad accent for Lenovo laptops.
How do I join Desk One to my Lenovo laptop computer?
Desk One connects to your Lenovo laptop computer through a USB cable.
Can I exploit Desk One with any Lenovo laptop computer?
Desk One is appropriate with most Lenovo laptops which have a USB port.
