In case your LG Mannequin WT1101CW washer is not draining correctly, chances are you’ll must take away and clear the drain pump. It’s situated on the backside of the washer, and it’s answerable for pumping the water out of the bathtub. Here’s a step-by-step information on take away the drain pump in your LG Mannequin WT1101CW washer. Nevertheless, if you happen to’re not comfy doing this your self, name a certified equipment restore technician.
Earlier than you start, you will want to collect just a few instruments: a Phillips head screwdriver, a flat head screwdriver, and a pair of pliers. Additionally, you will want a bucket to catch the water that can drain from the pump once you take away it. First, unplug the washer from the facility outlet. Subsequent, flip off the water provide to the washer. Then, place the bucket beneath the drain pump to catch the water that can drain out. Lastly, use the Phillips head screwdriver to take away the screws that maintain the drain pump in place.
After getting eliminated the screws, use the flat head screwdriver to pry the drain pump unfastened from the washer. Watch out to not injury the drain pump or the encircling elements. As soon as the drain pump is unfastened, use the pliers to disconnect the hoses which can be linked to it. Lastly, carry the drain pump out of the washer. Now that you’ve got eliminated the drain pump, you’ll be able to clear it. To do that, use a humid material to wipe away any dust or particles that has gathered on the pump. You can too use a small brush to scrub the within of the pump. As soon as the pump is clear, reassemble it within the reverse order that you just eliminated it.
Finding the Drain Pump
The drain pump is a crucial part of your LG Mannequin WT1101CW washer, answerable for expelling water from the bathtub through the spin cycle. In case your washer is just not draining correctly, a defective drain pump might be the offender.
Finding the drain pump can range relying on the particular mannequin of your washer. Nevertheless, normally, listed here are the steps to comply with:
- Unplug the washer from {the electrical} outlet for security causes.
- Flip off the water provide valves linked to the washer.
- Tilt the washer again barely to entry the underside of the unit.
- Find the drain pump, which is often located on the entrance or backside of the washer. It might be lined by a plastic panel that must be eliminated.
- Disconnect the hoses and wires linked to the drain pump. You’ll want to be aware how they’re linked for straightforward reassembly later.
- Take away the bolts or screws that safe the drain pump to the washer.
- Fastidiously pull the drain pump out of its housing. Examine the pump for any injury or particles which may be inflicting it to malfunction.
Eradicating the Drain Hose
Find the drain hose behind the washer, sometimes hid behind a small entry panel. Open the panel to reveal the hose.
Disconnect the drain hose from the drain pump by gently pulling it away. A clamp or fastener could safe the hose, so be cautious when detaching it.
Pull the drain hose fully out of the washer, guaranteeing to empty any remaining water into an appropriate container.
Non-obligatory Steps for Cussed Hose Elimination
If the drain hose is tightly caught or clogged, take into account these extra steps:
| Situation | Answer |
|---|---|
| Cussed clamp | Use pliers to rigorously loosen the clamp with out damaging the hose. |
| Clogged hose | Clear particles by working a skinny wire or brush by way of the hose and flushing with water. |
| Broken hose | Exchange the broken part of the hose with a brand new one of many identical dimension and materials. |
Inspecting the Impeller
After getting eliminated the drain pump, it’s essential to examine the impeller for any injury or blockage. The impeller is a crucial part of the drain pump answerable for spinning and draining water away from the washer. If the impeller is broken or blocked, it will probably compromise the effectivity of the drain pump and result in additional points.
To completely examine the impeller:
- Fastidiously take away the impeller from the drain pump housing.
- Study the impeller for any cracks, breaks, or deformities. Even minor injury can have an effect on its performance.
- Test for any overseas objects or particles caught within the impeller blades or the housing. These obstructions can block the sleek move of water and hinder the impeller’s rotation.
- Examine the impeller shaft for any indicators of damage or corrosion. Extreme friction or rust can result in problem in spinning and eventual failure.
- If seen injury or blockage is current, the impeller could must be changed or cleaned completely.
- At all times use real LG elements when changing the impeller to make sure optimum efficiency and security.
Common inspection and upkeep of the impeller are important for guaranteeing the longevity and correct functioning of your LG washer.
Reinstalling the Drain Pump
8. Exchange the Screw
Find the screw that holds the drain pump in place. It’s sometimes situated on the backside of the pump. Align the screw with the outlet within the mounting bracket and tighten it securely utilizing a screwdriver. To make sure a safe match, gently tug on the pump as soon as screwed to verify it’s tightly in place.
9. Reconnect the Wiring
Find {the electrical} connector for the drain pump. It’s normally a small, plastic connector with two or three wires. Align the connector with the corresponding plug on the drain pump and push it firmly till it clicks into place. Double-check that the connector is safe and the wires will not be unfastened or uncovered.
10. Reinstall the Kick Panel
Carry the kick panel again into place, aligning it with the underside of the washer cupboard. Push the kick panel firmly into place till it snaps into place. Make sure that the drain pump is just not obstructed by the kick panel and that the panel covers the pump fully.
Learn how to Take away Drain Pump on LG Mannequin WT1101CW
Instruments you will want:
- Phillips head screwdriver
- Flat head screwdriver
- Bucket or bowl
Directions:
- Unplug the washer from {the electrical} outlet.
- Flip off the water provide to the washer.
- Open the washer door and take away the garments.
- Find the drain pump on the backside of the washer. It’s normally situated on the appropriate facet.
- Disconnect the hoses from the drain pump.
- Take away the screws that maintain the drain pump in place.
- Pull the drain pump out of the washer.
- Clear the drain pump and substitute it if crucial.
- Reassemble the washer within the reverse order.
Individuals Additionally Ask
How do I do know if my LG Washer Drain Pump is unhealthy?
There are just a few indicators that your LG washer drain pump could also be unhealthy:
- Your washer is just not draining correctly.
- Your washer is making a loud noise when it’s draining.
- Your washer is leaking water from the underside.
Can I substitute the drain pump on my LG Washer myself?
Sure, you’ll be able to substitute the drain pump in your LG washer your self. Nevertheless, it is very important be aware that this can be a tough restore and will solely be tried by somebody with expertise in equipment restore.
