In as we speak’s technologically superior world, eradicating an antenna base from a automobile could not appear to be a frightening job. Nonetheless, if you end up needing to take away the Prius Antenna Base out of your 2013 mannequin, it is important to method the method with care and precision. This information will offer you a step-by-step method to make sure a easy and profitable antenna base removing with out inflicting any injury to your automobile. Comply with these directions fastidiously, and you will be again on the street with a modern, antenna-free Prius very quickly.
Earlier than embarking on the antenna base removing course of, it is essential to collect the mandatory instruments. These embody a Phillips head screwdriver, a flathead screwdriver, a plastic pry software, and a clear rag. It is also a good suggestion to park your Prius on a stage floor and interact the parking brake for added stability. With the instruments in hand and the automobile ready, you’ll be able to proceed with the antenna base removing.
To start the removing course of, find the antenna base on the roof of your Prius. Will probably be located close to the middle of the roof, and you may discover a small, spherical plastic cap masking the bottom. Gently use the flathead screwdriver to pry off the cap, revealing the antenna base and its mounting bolts. Utilizing the Phillips head screwdriver, fastidiously unscrew the mounting bolts and take away the antenna base from the roof. Remember to maintain the bottom securely as you take away it to forestall it from falling and inflicting injury. As soon as the antenna base is eliminated, you’ll be able to clear the mounting floor with the clear rag to take away any dust or particles earlier than reinstalling the cap.
Understanding the Prius Antenna Base
The Prius antenna base is a vital part of the automobile’s communication system, facilitating wi-fi communication with different gadgets. It’s usually situated on the roof of the automobile and includes a number of key parts:
– Antenna Mast: The antenna mast is a metallic rod that extends vertically from the bottom and is accountable for receiving and transmitting radio indicators.
– Base Plate: The bottom plate is a metallic disk that attaches the antenna mast to the automobile’s roof. It ensures a safe and secure connection between the antenna and the automobile.
– Floor Aircraft: The bottom aircraft is a metallic sheet situated beneath the bottom plate. It acts as a reflective floor for radio indicators, enhancing the effectivity of the antenna.
– Wiring Harness: The wiring harness connects the antenna base to the automobile’s electrical system. It permits the switch {of electrical} indicators between the antenna and different parts, such because the radio or navigation system.
Gathering the Essential Instruments
To efficiently take away the Prius antenna base from the 2013 mannequin, having the suitable instruments is essential. The next objects are important for this job:
Important Instruments
| Instrument | Objective |
|---|---|
| Torx T20 Bit | Take away the antenna base from the roof |
| Flathead Screwdriver | Gently pry open the antenna cowl |
| Adjustable Wrench | Tighten or loosen the antenna wire |
| Electrical Tape | Insulate and shield the uncovered wire |
Non-compulsory Instruments
Along with the important instruments, the next objects could improve the method:
Work gloves: Defend your palms whereas working with sharp objects
Stepladder: If mandatory, to entry the antenna base on the roof
Antenna base alternative: If the outdated base wants changing
Making ready the Car for Elimination
A number of measures have to be taken to make sure a easy antenna base removing course of on a 2013 Prius:
1. Security Precautions
Earlier than commencing any work, it’s essential to make sure the automobile is parked on a stage and secure floor. Interact the parking brake to forestall any sudden motion.
2. Clear and Safe the Work Space
Completely clear the world across the antenna base to take away any dust or particles that might intervene with the removing course of. Defend the automobile’s exterior by spreading a clear fabric or towel over the roof.
3. Disconnecting the Battery (for Automated Autos)
For automobiles geared up with an automatic security system, it’s essential to disconnect the battery earlier than making an attempt antenna base removing. This significant step ensures that no electrical faults or malfunctions happen through the course of. Seek the advice of the automobile’s proprietor’s handbook for particular battery disconnection directions.
| Step | Motion |
|---|---|
| 1. | Find and disconnect the adverse battery terminal (often marked with a black or blue cowl). |
| 2. | Securely fasten the disconnected terminal away from the battery to forestall any unintended reconnection. |
| 3. | Wait for roughly 10 minutes to permit {the electrical} system to totally discharge. |
Eradicating the Plastic Cowl
Find the plastic cowl that surrounds the antenna base. It is often a black or grey piece that snaps into place. Utilizing a trim removing software or a flathead screwdriver, gently pry the duvet free. Watch out to not injury the plastic clips that maintain it in place.
Eradicating the Screws
As soon as the duvet is eliminated, you may see two screws holding the antenna base to the roof of the automotive. Use a Phillips head screwdriver to take away these screws.
Unplugging the Antenna Cable
Beneath the antenna base, you may discover the antenna cable connector. It is often a white or black plug. Press the discharge button on the connector and pull it straight as much as unplug it.
Lifting Off the Antenna Base
Now you’ll be able to merely carry the antenna base straight as much as take away it from the roof of the automotive. Watch out to not drop it, as it may be simply broken if it falls.
Disconnecting the Antenna’s Electrical Connector
This step includes separating {the electrical} connection between the antenna and the bottom. Proceed with warning to forestall any injury to the fragile electrical parts.
**Supplies Required:**
| Instrument |
|---|
| Small flathead screwdriver |
**Steps:**
- Find {the electrical} connector on the base of the antenna. It’s often coated by a small rubber or plastic cap.
- Rigorously use the flathead screwdriver to pry open the cap and expose the connector.
- Maintain the connector firmly and pull it straight as much as disconnect it from the antenna base.
- As soon as disconnected, gently pull the antenna wire out of the best way to forestall any interference through the subsequent steps.
- Be aware the orientation of the connector and the wire as you disconnect them. This data shall be essential when reconnecting the antenna in a while. Correct alignment ensures optimum electrical contact and sign reception. Take note of the situation of the locking tabs or clips that safe the connector in place, as they could fluctuate relying on the particular mannequin 12 months and trim stage. Moreover, examine the situation of the connector and the wire for any injury or corrosion. If any points are noticed, seek the advice of a professional auto electrician for additional help.
Unbolting the Antenna Base
6. Undo the Bolts Utilizing a Socket Wrench
The ultimate step is to take away the bolts holding the antenna base in place. For this, you have to a socket wrench with the suitable measurement socket (usually 10mm or 12mm). This is methods to proceed:
- Insert the socket into the bolt head and guarantee it is securely seated.
- Flip the socket wrench counterclockwise to loosen the bolt.
- Proceed turning the wrench till the bolt turns into free sufficient to take away by hand.
- Repeat the method for the remaining bolts.
| Bolt Dimension | Socket Dimension |
|---|---|
| 10mm | 10mm Socket |
| 12mm | 12mm Socket |
As soon as all of the bolts are eliminated, you must have the ability to carry the antenna base straight up and off the roof of your Prius. Deal with the bottom with care to keep away from damaging the fragile connections or wires.
Lifting the Antenna Base Off the Car
Listed below are the steps to carry the antenna base off the automobile.
- Place a skinny fabric or towel over the antenna base to guard it from scratches.
- Utilizing a flat-head screwdriver or a pry software, gently pry up the sides of the antenna base.
- Work across the base, prying it up a little bit bit at a time till it loosens from the automotive.
- As soon as the bottom is free, gently carry it off the automotive.
- Watch out to not injury the antenna wire or the automotive’s paint when eradicating the bottom.
- If the bottom is caught, you’ll be able to strive utilizing a warmth gun or hair dryer to melt the adhesive.
- As soon as the bottom is eliminated, you will notice the antenna wire. Disconnect the wire from the bottom by urgent on the discharge button or tab.
| Potential Issues | Options |
|---|---|
| The antenna base is caught | Use a warmth gun or hair dryer to melt the adhesive. |
| The antenna wire is broken | Substitute the antenna wire. |
Inspecting the Base
Earlier than you start eradicating the antenna base, it is important to examine it fastidiously. Search for any indicators of harm, akin to cracks or dents. If there may be any important injury, you might want to exchange the whole base earlier than putting in a brand new antenna. Moreover, test the connection between the antenna base and the roof of the automobile to make sure it is safe.
Examine the antenna base for any corrosion or rust. Corrosion can weaken the bottom and make it harder to take away. If there may be any corrosion, it might should be cleaned or handled earlier than eradicating the antenna base.
Alternative Components
Upon getting inspected the bottom and decided that it must be changed, you have to to collect the mandatory alternative elements. This features a new antenna base and, in some circumstances, a brand new gasket or seal. Remember to select alternative elements which are appropriate along with your particular Prius mannequin and 12 months.
Here’s a record of the alternative elements you might want:
| Half | Description |
|---|---|
| Antenna base | The principle part that holds the antenna in place |
| Gasket or seal | A rubber or plastic part that helps stop water from leaking into the automobile |
Eradicating the Previous Antenna Base
1. Find the antenna base on the roof of your Toyota Prius. It’s often positioned close to the middle of the roof.
2. Use a Phillips head screwdriver to take away the 2 screws which are holding the antenna base in place.
3. Rigorously carry the antenna base off the roof. Don’t pull on the antenna wire.
4. Disconnect the antenna wire from the antenna base.
5. Take away the outdated antenna base from the roof.
Putting in the New or Refurbished Antenna Base
1. Join the antenna wire to the brand new or refurbished antenna base.
2. Place the brand new or refurbished antenna base on the roof.
3. Safe the antenna base in place utilizing the 2 screws that you simply eliminated in Step 2.
4. Tighten the screws till they’re cosy.
5. Examine to guarantee that the antenna wire is securely linked to the antenna base.
6. Take a look at the antenna to guarantee that it’s working correctly.
Further Ideas
7. In case you are having hassle eradicating the outdated antenna base, you need to use a pair of pliers to softly pry it off the roof.
8. In case you are changing the antenna base with a brand new one, you might have to buy an adapter to attach the brand new antenna base to the antenna wire.
9. When putting in the brand new or refurbished antenna base, guarantee that the bottom is stage and that the antenna wire just isn’t kinked or broken. Correct set up will assist make sure the optimum efficiency of your Prius’s antenna, permitting for clear and dependable radio reception. Common upkeep and inspections of the antenna base, together with any mandatory cleansing or changes, can additional contribute to its longevity and effectiveness.
Reassembling the Antenna System
As soon as the antenna base has been eliminated, it is time to reassemble the antenna system. Comply with these steps to make sure a safe and correct set up:
- Place the gasket over the antenna base: Align the gasket with the notch on the bottom and gently press it into place.
- Insert the antenna into the bottom: Rigorously insert the antenna into the bottom till it clicks into place.
- Tighten the retaining nut: Utilizing a wrench, tighten the retaining nut on the bottom to safe the antenna.
- Reattach the duvet: Align the duvet with the bottom and snap it again into place.
- Substitute the bolt: Insert the bolt into the opening within the base and tighten it with a wrench.
- Reinstall the nut: Screw the nut onto the bolt and tighten it with a wrench.
- Join the antenna wire: Plug the antenna wire into the connector on the antenna base.
- Wrap the wire: Wrap the antenna wire across the base to guard it and supply pressure reduction.
- Safe the wire: Use cable ties or electrical tape to safe the wire alongside the antenna.
- Take a look at the antenna: Begin the automobile and test if the radio is receiving indicators correctly.
Further Data:
| Part | Description |
|---|---|
| Gasket | A rubber seal that stops water and particles from getting into the antenna base. |
| Retaining Nut | A metallic nut that secures the antenna to the bottom. |
| Cowl | A plastic cowl that protects the antenna and electrical connections. |
| Bolt | A metallic bolt that holds the antenna base to the automobile. |
| Nut | A metallic nut that secures the bolt in place. |
How To Take away Prius Antenna Base 2013
The antenna base on a 2013 Prius is situated on the roof of the automobile, close to the middle. It’s a black, plastic base that the antenna screws into. To take away the antenna base, you have to a Phillips head screwdriver.
- Park the Prius in a protected location.
- Flip off the engine and open the hood.
- Find the antenna base on the roof of the automobile.
- Use the screwdriver to take away the 2 screws that maintain the antenna base in place.
- As soon as the screws are eliminated, you’ll be able to pull the antenna base straight as much as take away it.
Individuals Additionally Ask
How do I take away the antenna base on a 2013 Prius?
To take away the antenna base on a 2013 Prius, you have to a Phillips head screwdriver. Upon getting the screwdriver, comply with these steps:
- Park the Prius in a protected location.
- Flip off the engine and open the hood.
- Find the antenna base on the roof of the automobile.
- Use the screwdriver to take away the 2 screws that maintain the antenna base in place.
- As soon as the screws are eliminated, you’ll be able to pull the antenna base straight as much as take away it.
The place is the antenna base situated on a 2013 Prius?
The antenna base on a 2013 Prius is situated on the roof of the automobile, close to the middle. It’s a black, plastic base that the antenna screws into.
What instruments do I have to take away the antenna base on a 2013 Prius?
To take away the antenna base on a 2013 Prius, you have to a Phillips head screwdriver.
