In relation to digital gadgets, it’s all the time a good suggestion to discover ways to take them aside. For instance, in case your PS4 Slim is experiencing points, you may have to open it as much as clear it or restore it. This information will present you the way to safely disassemble your PS4 Slim so to work on it.
Earlier than you begin, you will need to collect the instruments you will want. You have to a Phillips #0 screwdriver, a T8 Torx screwdriver, and a spudger. After you have your instruments, you may start the disassembly course of. Be sure to maintain monitor of all of the screws you take away, as placing your PS4 Slim again collectively would require utilizing them once more.
First, you will want to take away the highest cowl of the PS4 Slim. To do that, use the Phillips #0 screwdriver to take away the screw that’s situated on the again of the console, subsequent to the facility port. As soon as the screw is eliminated, you may raise the highest cowl off of the console. Watch out to not injury the ribbon cable that connects the highest cowl to the motherboard.
Prepping for Disassembly
Important Instruments and Supplies
Earlier than embarking on the disassembly course of, collect the mandatory instruments and supplies to make sure a easy and profitable operation. These embrace:
- Phillips #00 Screwdriver
- Torx T8 Safety Screwdriver
- Plastic Pry Instruments
- Isopropyl Alcohol (Non-obligatory)
- Cotton Swabs (Non-obligatory)
- Anti-Static Wrist Strap (Advisable)
- Magnetic Screw Tray (Advisable)
Security Precautions
Previous to disassembly, observe the next security precautions to reduce the danger of injury or harm:
- Energy down and unplug the PlayStation 4 Slim.
- Put on an anti-static wrist strap to stop electrostatic discharge (ESD) injury.
- Work on a secure and well-lit floor.
- Keep away from touching delicate elements, such because the motherboard or arduous drive.
- Deal with screws fastidiously and preserve them organized in a magnetic screw tray.
Floor Preparation
To make sure a clear and arranged workspace, the next floor preparation steps are really useful:
| Step | Description |
|---|---|
| 1 | Clear a spacious space in your work floor. |
| 2 | Lay down a clear material or anti-static mat to guard the work floor and PlayStation 4 Slim. |
| 3 | Arrange a Magnetic Screw Tray close by to retailer the screws you take away. |
| 4 | Place the PlayStation 4 Slim on the ready floor, the wrong way up. |
Eradicating the Entrance Casing
Start by fastidiously flipping the PS4 Slim the wrong way up and resting it on a gentle, clear floor. Find the three rubber toes on the underside of the console. Gently pry each off utilizing a plastic pry instrument or your fingernails.
Subsequent, take away the 2 screws that have been hidden underneath the rubber toes. These screws are usually Phillips #0 screws. As soon as the screws are eliminated, the entrance casing may be lifted off. Grip the casing alongside the perimeters and gently pull it in direction of you. There could also be some resistance from the clips that maintain the casing in place, nevertheless it ought to come off simply with somewhat effort.
Cautions When Eradicating the Casing
When eradicating the entrance casing, you’ll want to deal with it with care to keep away from damaging the clips or the plastic housing. If the casing doesn’t come off simply, don’t power it. As a substitute, examine for any remaining screws or clips which will nonetheless be hooked up. It’s also essential to keep away from touching the circuit board contained in the console, as static electrical energy can injury the elements.
| Warning | Description |
|---|---|
| Keep away from forcing the casing | If the casing doesn’t come off simply, examine for remaining screws or clips. |
| Deal with with care | Keep away from damaging the clips or plastic housing. |
| Keep away from touching the circuit board | Static electrical energy can injury the elements. |
Accessing the Energy Provide
To entry the facility provide, you will have to take away the again cowl of the PS4 Slim. To do that, find the screw on the again of the console, slightly below the facility button. Use a Phillips head screwdriver to take away the screw. As soon as the screw is eliminated, you may slide the again cowl off the console.
Eradicating the Energy Provide
As soon as the again cowl is eliminated, you will see the facility provide. It is held in place by 4 screws. Use a Phillips head screwdriver to take away the screws. As soon as the screws are eliminated, you may raise the facility provide out of the console.
Disconnecting the Energy Provide
As soon as the facility provide is eliminated, you will have to disconnect it from the console. To do that, find the facility connector on the again of the console. It is a white connector with two wires popping out of it. Use your fingers to squeeze the edges of the connector and pull it straight out of the console.
| Screw Location | Screw Sort |
|---|---|
| Again of the console, slightly below the facility button | Phillips head |
| Securing the facility provide | Phillips head |
Detaching the Onerous Drive
Detaching the arduous drive from a PS4 Slim requires some precision and care. Listed below are the detailed steps:
1. Energy Off and Unplug the PS4
Earlier than starting, make sure the PS4 is totally powered off and disconnected from any energy supply.
2. Find the Onerous Drive Bay
Flip the PS4 over and find the arduous drive bay on the underside. It is a rectangular opening coated by a detachable plate.
3. Take away the Onerous Drive Bay Plate
Utilizing a Philips #0 screwdriver, unscrew the screw holding the arduous drive bay plate in place. Gently raise and take away the plate to show the arduous drive.
4. Disconnect the Onerous Drive
The arduous drive is related to the PS4’s motherboard through a SATA cable and energy connector. Rigorously disconnect each cables from the arduous drive:
a. SATA Cable: Gently pull the SATA cable straight up from its connector on the arduous drive.
b. Energy Connector: Raise the small plastic tab on the facility connector and gently pull the connector straight up from the arduous drive.
5. Take away the Onerous Drive
As soon as disconnected, the arduous drive may be eliminated. Gently slide it out of the bay in direction of the again of the PS4 and raise it out.
Eradicating the Blu-ray Drive
Step 1: Energy Down and Unplug the PS4 Slim
Earlier than disassembling the console, guarantee it is powered off and disconnected from any energy supply.
Step 2: Take away the High Cowl
1. Slide the highest cowl towards the again of the console.
2. Raise the quilt off from the entrance edge.
Step 3: Disconnect the Blu-ray Drive Ribbon Cable
1. Find the ribbon cable connecting the Blu-ray drive to the motherboard.
2. Use a spudger or your fingernail to softly pry up the latch securing the cable.
3. Rigorously pull the ribbon cable straight out from its connector.
Step 4: Unscrew the Blu-ray Drive Mounting Screws
1. Take away the 2 screws securing the Blu-ray drive to the chassis.
2. Place the screws in a secure place to keep away from dropping them.
Step 5: Raise Out the Blu-ray Drive
| Warning: The Blu-ray drive could also be delicate. Deal with it with care. |
|---|
|
1. Gently raise the drive straight up and out of the console. |
|
2. Keep away from touching the lens or optical elements to stop injury. |
|
3. Set the Blu-ray drive apart on a secure floor. |
Disconnecting the Cables
6. Eradicating the Energy Provide Unit
Disconnecting the cables requires cautious consideration to element. Observe these steps to make sure the method is finished safely and accurately:
- Disconnect the facility cable: Find the facility wire related to the again of the PS4 Slim. Gently grasp the plug and pull it straight out of the wall outlet.
- Unplug the information cable: Determine the HDMI cable or different information cable related to the PS4 Slim’s entrance or again. Rigorously wiggle the cable side-to-side whereas pulling it out of the port.
- Take away the Ethernet cable: If an Ethernet cable is related to the again of the PS4 Slim, unplug it by urgent down on the discharge tab and pulling the cable out.
- Disconnect the USB cables: Find and unplug any USB cables related to the USB ports on the entrance or again of the PS4 Slim.
- Take away the auxiliary cables: Disconnect any further cables, akin to audio cables or optical cables, which may be related to the PS4 Slim.
- Confirm all cables are disconnected: Take a second to double-check that each one cables have been disconnected from the PS4 Slim earlier than continuing to the subsequent step.
Desk: Abstract of Cable Disconnection
| Cable Sort | Motion |
|---|---|
| Energy cable | Unplug from wall outlet |
| Information cable (HDMI/different) | Unplug from PS4 Slim port |
| Ethernet cable | Press launch tab and unplug |
| USB cables | Unplug from PS4 Slim USB ports |
| Auxiliary cables (audio/optical) | Disconnect from PS4 Slim |
Lifting the Motherboard
As soon as the screws are eliminated, you may raise and take away the motherboard from the PS4 Slim. Nonetheless, it is essential to do that fastidiously and keep away from placing any strain on different elements. Use each arms to carry the edges of the motherboard and raise it gently till the connectors on the underside are disengaged from the bottom.
Listed below are some further suggestions for lifting the motherboard:
- Be sure the PS4 Slim is powered off and unplugged.
- Deal with the motherboard by the perimeters, avoiding touching the elements on the floor.
- When you encounter any resistance when lifting the motherboard, examine to see if there are any cables or connectors which might be nonetheless hooked up.
- Don’t raise the motherboard by the facility provide connector.
- Watch out to not bend or injury the motherboard.
As soon as the motherboard is lifted, you will want to disconnect the next cables from the underside of it:
| Connector | Description |
|---|---|
| Energy provide connector | Connects the motherboard to the facility provide. |
| Blu-ray drive connector | Connects the motherboard to the Blu-ray drive. |
| Onerous drive connector | Connects the motherboard to the arduous drive. |
| Fan connector | Connects the motherboard to the cooling fan. |
Now, raise and take away the motherboard is now separated from the PS4 Slim base and is prepared for repairs or alternative.
Eradicating the Warmth Sink
As soon as the facility provide, arduous drive, and optical drive are eliminated, you can begin engaged on eradicating the warmth sink. It is a essential step, as you should watch out to not injury the fragile elements beneath.
Here is a step-by-step information on the way to take away the warmth sink:
1. Take away the screws holding the warmth sink to the motherboard.
There are usually 4 screws that maintain the warmth sink in place. Use a Phillips #0 screwdriver to take away these screws.
2. Rigorously raise the warmth sink straight up.
Watch out to not bump or injury any of the elements on the motherboard when lifting the warmth sink.
3. Take away the thermal paste from the CPU and warmth sink.
Use a cotton swab or a paper towel soaked in isopropyl alcohol to wash the previous thermal paste from the CPU and warmth sink. Remember to take away the entire previous paste, as it will assist guarantee good thermal contact between the CPU and the brand new warmth sink.
4. Apply new thermal paste to the CPU.
Use a small pea-sized quantity of thermal paste and apply it to the middle of the CPU. Watch out to not apply an excessive amount of thermal paste, as this could result in overheating.
5. Reinstall the warmth sink onto the CPU.
Rigorously align the warmth sink with the CPU and gently decrease it into place. Tighten the screws to safe the warmth sink to the motherboard.
6. Reconnect the facility cables to the motherboard.
Reconnect the facility cables that you simply eliminated earlier to energy the motherboard and the remainder of the elements.
7. Check the PS4 Slim to verify it is working correctly.
As soon as you’ve got reassembled the PS4 Slim, flip it on and take a look at it to verify it is working correctly. If the PS4 Slim would not activate or would not work correctly, double-check your connections and ensure that the entire elements are seated accurately.
8. Troubleshooting suggestions
When you’re having hassle eradicating the warmth sink, listed below are just a few troubleshooting suggestions:
| Drawback | Resolution |
|---|---|
| The screws are caught and will not come out. | Strive utilizing a screwdriver with a greater grip, or attempt utilizing a small quantity of penetrating oil to loosen the screws. |
| The warmth sink is caught to the CPU and will not come off. | Strive gently rocking the warmth sink forwards and backwards to loosen it. It’s also possible to attempt utilizing a warmth gun to warmth up the warmth sink, which is able to assist loosen the thermal paste. |
| I by chance broken the CPU or the warmth sink. | When you’ve broken the CPU or the warmth sink, you will want to interchange it. You should purchase alternative elements from Sony or from a third-party retailer. |
Detaching the CPU and GPU
The CPU and GPU are situated on the motherboard of the PS4 Slim. To detach them, you will want to:
- Take away the screws that safe the motherboard to the chassis.
- Rigorously raise the motherboard out of the chassis.
- Find the CPU and GPU on the motherboard. They’re giant, sq. chips with heatsinks hooked up.
- Use a spudger or different pry instrument to softly pry the heatsinks off of the CPU and GPU.
- As soon as the heatsinks are eliminated, you will notice the CPU and GPU dies. They’re small, sq. chips with gold-plated contacts.
- Use a pair of tweezers to fastidiously raise the CPU and GPU dies out of their sockets.
- Place the CPU and GPU dies in a secure place, akin to an anti-static bag.
- Reassemble the PS4 Slim in reverse order.
Be aware:
The CPU and GPU are delicate elements. Remember to deal with them with care to keep away from damaging them.
| Device | Goal | |
|---|---|---|
| ✔ | Phillips #0 screwdriver | Take away the screws that safe the motherboard to the chassis. |
| ✔ | Spudger | Pry the heatsinks off of the CPU and GPU. |
| ✔ | Tweezers | Raise the CPU and GPU dies out of their sockets. |
Reassembly
After you have cleaned the elements, it is time to reassemble the PS4 Slim. Observe these steps in reverse order to place all the pieces again collectively:
- Insert the arduous drive again into its bay.
- Screw the arduous drive again into place.
- Join the facility provide to the motherboard.
- Safe the facility provide with the 2 screws.
- Join the fan to the motherboard.
- Safe the fan with the 4 screws.
- Place the optical drive again into the console.
- Safe the optical drive with the screws.
- Join the ribbon cables and energy connector to the motherboard.
- Place the highest cowl again on the console.
- Safe the highest cowl with the screws.
- Flip the console over and place it on its toes.
Testing
After you have reassembled the PS4 Slim, it is time to take a look at it to verify it is working correctly. Observe these steps:
- Plug the console into an influence outlet.
- Insert a recreation disc into the optical drive.
- Activate the console.
- Watch for the sport to load.
- Begin enjoying the sport.
If the console is working correctly, you must be capable of play the sport with none issues. When you encounter any points, chances are you’ll have to seek the advice of an expert for assist.
How To Take Aside Ps4 Slim
To take aside a PS4 Slim, you will want the next instruments:
- Phillips #0 screwdriver
- Torx T8 screwdriver
- Plastic spudger
- Tweezers (non-compulsory)
After you have gathered your instruments, observe these steps:
1. Unplug the PS4 Slim from the facility outlet and switch it off.
2. Place the PS4 Slim on a flat floor.
3. Use the Phillips #0 screwdriver to take away the 4 screws on the underside of the PS4 Slim.
4. Raise the highest cowl of the PS4 Slim off.
5. Use the Torx T8 screwdriver to take away the screw that’s situated on the appropriate aspect of the PS4 Slim, close to the facility button.
6. Raise the plastic cowl off of the PS4 Slim.
7. Use the tweezers to take away the ribbon cable that’s related to the facility button.
8. Use the plastic spudger to disconnect the opposite ribbon cables which might be related to the motherboard.
9. Raise the motherboard out of the PS4 Slim.
10. Use the Torx T8 screwdriver to take away the screws which might be holding the warmth sink in place.
11. Raise the warmth sink off of the PS4 Slim.
12. Use the plastic spudger to disconnect the ribbon cable that’s related to the fan.
13. Raise the fan out of the PS4 Slim.
14. The PS4 Slim is now disassembled.
