For individuals who love spending time on the water, the Moken 10 Canoe is a good choice. It is secure, sturdy, and straightforward to paddle. Nevertheless, in case you ever have to take away the motor out of your Moken 10 Canoe, it may be a little bit of a problem. That is why we have put collectively this information on the best way to take away the motor from a Moken 10 Canoe.
Step one is to take away the propeller. To do that, merely unscrew the propeller nut utilizing a wrench. As soon as the propeller is eliminated, you’ll be able to then take away the motor mount. The motor mount is held in place by two bolts. Take away these bolts and the motor mount will come off.
Subsequent, you should disconnect {the electrical} wires from the motor. There are two electrical wires that connect with the motor. Merely disconnect these wires and the motor might be free. As soon as the motor is free, you’ll be able to then take away it from the canoe. To do that, merely raise the motor up and out of the canoe.
Eradicating the Outboard Motor Mount
To take away the outboard motor mount, you will have the next instruments:
- Socket wrench
- Field wrench
- Flathead screwdriver
- Phillips head screwdriver
- Pry bar
Listed below are the steps on the best way to take away the outboard motor mount:
- Disconnect the battery. It is a security precaution to forestall any electrical shocks.
- Take away the bolts that maintain the motor to the mount. There are sometimes 4 bolts that maintain the motor to the mount. Use a socket wrench or field wrench to take away these bolts.
- Separate the motor from the mount. As soon as the bolts are eliminated, it is best to have the ability to separate the motor from the mount. Use a pry bar to softly pry the motor away from the mount if crucial.
- Clear the mounting floor. As soon as the motor is eliminated, you’ll be able to clear the mounting floor of the canoe. Use a flathead screwdriver or putty knife to scrape off any outdated sealant or particles.
| Merchandise | Description |
|---|---|
| Socket wrench | Used to take away the bolts that maintain the motor to the mount. |
| Field wrench | Used to take away the bolts that maintain the motor to the mount. |
| Flathead screwdriver | Used to scrape off any outdated sealant or particles from the mounting floor. |
| Phillips head screwdriver | Used to take away the screws that maintain the motor cowl in place. |
| Pry bar | Used to softly pry the motor away from the mount if crucial. |
- Apply new sealant to the mounting floor. Use a marine-grade sealant to use a brand new bead of sealant to the mounting floor of the mount.
- Reattach the motor to the mount. Align the motor with the mounting floor and thoroughly raise it into place. Use a socket wrench or field wrench to tighten the bolts that maintain the motor to the mount.
- Reconnect the battery. As soon as the motor is securely mounted, you’ll be able to reconnect the battery.
Detaching the Motor Shaft
Detaching the motor shaft from the motor housing is a important step in eradicating the motor from the Moke 10 canoe. Comply with these detailed directions to make sure a profitable and secure process:
1. Collect Instruments
* 10mm socket wrench
* 17mm socket wrench
* Ratchet
2. Disconnect Electrical Wires
* Find {the electrical} wires related to the motor shaft.
* Disconnect the wires rigorously by unplugging the connectors.
3. Take away Motor Mount Bolts
* Establish the bolts that safe the motor mount to the canoe.
* Use the 10mm socket wrench to take away these bolts.
4. Loosen Propeller Nut
* Use the 17mm socket wrench to loosen the propeller nut.
* Don’t take away the nut utterly at this stage.
5. Wiggle Motor Shaft
* Grip the motor shaft firmly and gently wiggle it forwards and backwards.
* Apply growing pressure till the shaft turns into unfastened from the housing.
* Be affected person, as this step could require some effort.
Warning:
* Keep away from pulling straight on the motor shaft, as this might injury the motor housing.
* If the shaft is caught, use a delicate rocking movement to free it up.
* As soon as the shaft is unfastened, raise the motor rigorously to take away it from the canoe.
Draining the Water from the Motor
Supplies You will Want:
- Wrench or socket set
- Funnel
- Container for the water
To empty the water from the motor, comply with these steps:
1.
Disconnect the gas line from the motor.
2.
Take away the spark plug wires from the spark plugs.
3.
Flip the motor the wrong way up and place it on a degree floor.
4.
Find the drain plug on the underside of the motor.
5.
Place the container underneath the drain plug.
6.
Use the wrench or socket set to take away the drain plug.
7.
Enable the water to empty from the motor.
8.
As soon as all of the water has drained, exchange the drain plug and tighten it securely.
9.
Reconnect the gas line and spark plug wires.
10.
Flip the motor upright and test for leaks.
Defending and Storing the Motor
To make sure the longevity and correct functioning of your Moken 10 Canoe motor, it is essential to take correct care in defending and storing it when not in use.
Defending the Motor
-
Rinse with Contemporary Water: After use, rinse the motor totally with recent water to take away salt, sand, and particles.
-
Dry the Motor: Use a clear, dry fabric to wipe down the motor, eradicating any remaining moisture.
-
Apply Corrosion Inhibitor: Spray a corrosion inhibitor, comparable to WD-40, onto the motor’s metallic parts to guard them from rust and corrosion.
-
Examine and Tighten Bolts: Test all bolts and screws and tighten any that will have loosened throughout use.
Storing the Motor
When storing the motor, it is vital to decide on a dry, well-ventilated location to forestall moisture buildup.
-
Take away the Battery: Disconnect the battery from the motor to forestall it from draining.
-
Cowl the Motor: Place a protecting cowl over the motor to maintain it clear and dry.
Prolonged Storage (Greater than 30 Days)
For prolonged storage, extra steps are really useful:
| Step | Description |
|---|---|
| 1. Drain Engine Oil: Drain the engine oil from the motor and exchange it with a small quantity of fogging oil. | |
| 2. Fog the Engine: Take away the spark plug and spray fogging oil into the cylinder. | |
| 3. Substitute the Spark Plug: Reinstall the spark plug and retailer the motor in a dry, well-ventilated location. |
Reassembly and Testing
As soon as the motor is disassembled, it is time to reassemble it. Comply with these steps rigorously to make sure correct reassembly:
1. Join the motor to the drive shaft.
Align the motor’s drive shaft with the drive shaft on the canoe. Safe the motor with the bolts supplied.
2. Set up the propeller.
Place the propeller onto the motor’s drive shaft. Tighten the propeller nut securely.
3. Join {the electrical} wires.
Join the optimistic and adverse wires from the motor to the corresponding terminals on the battery. Guarantee a safe connection.
4. Mount the management panel.
Mount the management panel on the canoe in a handy location. Join the wires from the motor to the management panel.
5. Set up the battery.
Place the battery within the designated compartment on the canoe. Safe the battery with the straps or clips supplied.
6. Take a look at the motor.
Earlier than taking the canoe out on the water, check the motor by beginning it up and operating it for a couple of minutes. Test for any uncommon noises or vibrations.
7. Alter the trim.
If the canoe will not be operating straight, modify the motor’s trim by turning the trim tab till the canoe runs easily.
8. Lubricate the motor.
Apply a small quantity of lubricant to the motor’s bearings and gearcase to make sure clean operation.
9. Clear the motor.
After every use, clear the motor and propeller with recent water to take away any salt or filth buildup.
10. Retailer the motor correctly.
When not in use, retailer the motor in a dry, cool location. Disconnect the battery and defend the motor from mud and moisture.
| Activity | Instruments |
|---|---|
| Connecting motor to drive shaft | Bolts, wrench |
| Putting in propeller | Propeller nut, wrench |
| Connecting electrical wires | Screwdriver or wire crimper |
| Mounting management panel | Screws or bolts, wrench or screwdriver |
| Putting in battery | Battery straps or clips |
| Adjusting trim | Trim tab |
| Lubricating motor | Lubricant, brush |
| Cleansing motor | Contemporary water, sponge |
How To Take Motor Out Of Moken 10 Canoue
To take away the motor from a Moken 10 canoe, you will have the next instruments:
- A wrench
- A screwdriver
- A pair of pliers
After you have the mandatory instruments, comply with these steps:
- Disconnect the battery from the motor.
- Take away the bolts that maintain the motor to the canoe.
- Carry the motor out of the canoe.
Make sure to retailer the motor in a dry place when not in use.
Individuals Additionally Ask
How do I take away the trolling motor from my Moken 10 canoe?
To take away the trolling motor out of your Moken 10 canoe, you will have to comply with the steps outlined above.
How do I exchange the motor on my Moken 10 canoe?
To switch the motor in your Moken 10 canoe, you will have to comply with the steps outlined above in reverse order.
What’s one of the simplest ways to retailer my Moken 10 canoe?
One of the best ways to retailer your Moken 10 canoe is in a dry place away from direct daylight.
How do I clear my Moken 10 canoe?
To scrub your Moken 10 canoe, you need to use a gentle cleaning soap and water answer. Make sure to rinse the canoe totally after cleansing.
