Unveiling the hidden complexities of the PlayStation 5 (PS5) controller could appear daunting, but it surely’s a rewarding endeavor for tech-savvy people. Nevertheless, dismantling this intricate gadget requires exact execution and adherence to correct procedures. This complete information will meticulously information you thru the intricate means of disassembling your PS5 controller, empowering you with the data and confidence to deal with this endeavor.
Earlier than embarking on this disassembly journey, it is crucial to assemble the mandatory instruments, together with a small Phillips screwdriver and a pry instrument. Moreover, guaranteeing a well-lit and arranged workspace will considerably improve your expertise. Endurance and meticulous consideration to element will function your steadfast companions all through this course of. Keep in mind, haste makes waste, and dashing by the steps could result in unintended penalties. Subsequently, proceed with care and precision to keep up the integrity of your controller.
First, we’ll enterprise into the controller’s exterior, the place the backplate beckons for removing. Find the 4 screws securing it and gently unscrew them with the Phillips screwdriver. As soon as liberated, rigorously raise the backplate away, unveiling the controller’s inner circuitry. Take warning to not apply extreme power, as delicate ribbon cables join the backplate to the controller’s mainboard. These cables are important to the controller’s performance, so deal with them with the utmost care. Within the subsequent steps, we’ll delve deeper into the controller’s anatomy, progressively disentangling its interior workings.
Disassembling the Exterior Shell
**Step 1: Eradicating the Again Screws**
To start disassembling the exterior shell of your PS5 controller, you may want a T5 Torx screwdriver. Begin by flipping the controller over and finding the 4 T5 screws on the again. These screws maintain the 2 halves of the shell collectively.
Rigorously unscrew all 4 screws. Be sure you maintain onto them, as you may want them later for reassembly.
**Step 2: Separating the Shell Halves**
As soon as the screws are eliminated, you’ll be able to start separating the 2 halves of the shell. Begin by gently prying aside the highest and backside edges of the controller. The 2 halves of the shell ought to separate simply.
**Step 3: Disconnecting the Battery Connector**
As soon as the shell halves are separated, you may must disconnect the battery connector. The battery connector is a small, white connector situated on the left-hand aspect of the controller.
Gently raise the battery connector up and away from the controller. Watch out to not injury the connector or the wires connected to it.
**Step 4: Eradicating the Shoulders**
The subsequent step is to take away the shoulder buttons. The shoulder buttons are held in place by two screws every. Find the 4 screws and take away them utilizing your T5 Torx screwdriver.
As soon as the screws are eliminated, you’ll be able to raise the shoulder buttons up and away from the controller. Watch out to not injury the buttons or the wires connected to them.
**Step 5: Eradicating the Faceplate**
The ultimate step is to take away the faceplate. The faceplate is held in place by clips. Gently pry the faceplate across the edges till it pops off.
As soon as the faceplate is eliminated, the exterior shell of your PS5 controller will likely be utterly disassembled.
Eradicating the Battery
To take away the battery, you will have a Phillips #00 screwdriver.
1. Flip the controller the wrong way up in order that the again is dealing with you.
2. Find the 4 screws that maintain the again panel in place and take away them.
3. Rigorously raise the again panel off of the controller. Watch out to not injury the ribbon cable that connects the again panel to the controller.
4. Find the battery connector and disconnect it from the controller.
5. Take away the battery from the controller.
| Screw Dimension | Amount |
|---|---|
| Phillips #00 | 4 |
6. To reassemble the controller, merely comply with these steps in reverse order.
Accessing the Motherboard
As soon as you have eliminated the again cowl, you may have entry to the motherboard. Nevertheless, earlier than you’ll be able to disconnect the motherboard, it’s essential take away just a few extra screws.
Eradicating the Motherboard Screws
There are 10 screws that maintain the motherboard in place. They’re situated within the following locations:
- 4 screws within the corners of the motherboard
- Two screws on the left aspect of the motherboard, close to the headphone jack
- Two screws on the precise aspect of the motherboard, close to the USB ports
- Two screws in the midst of the motherboard, close to the battery connector
Use a Phillips #0 screwdriver to take away all 10 screws. As soon as the screws are eliminated, you’ll be able to rigorously raise the motherboard up and out of the controller.
Disconnecting the Motherboard
As soon as the motherboard is lifted up, you may must disconnect just a few cables. These cables are situated on the underside of the motherboard, close to the battery connector.
There are three cables that have to be disconnected:
| Cable | Location |
|---|---|
| Battery cable | Subsequent to the battery connector |
| Rumble motor cable | Subsequent to the rumble motors |
| Headphone jack cable | Subsequent to the headphone jack |
To disconnect a cable, gently pull on the connector till it comes unfastened. Don’t pull on the wires, as this might injury the cable.
Detaching the Joysticks
Step 1: Take away the Joysticks’ Escutcheons
Find the 2 small, spherical escutscheons that cowl the bottom of every joystick. Utilizing a flat-head screwdriver or a spudger instrument, gently pry up the escutscheons and take away them.
Step 2: Expose the Joystick Screw
As soon as the escutscheons are eliminated, you may see the only screw that holds every joystick in place. Utilizing a Phillips #00 screwdriver, rigorously unscrew each screws.
Step 3: Raise and Disconnect the Joystick
Grasp the underside of the joystick and gently raise it upward. As you raise, disconnect the ribbon cable that connects the joystick to the controller’s mainboard by pulling the connector straight up.
Step 4: Use a Spudger to Disconnect the Aspect Buttons
Earlier than eradicating the joystick utterly, it’s essential disconnect the aspect buttons (L1/R1 or L2/R2) related to it. Insert a spudger or a flat-head screwdriver into the small hole between the joystick and the controller’s physique. Gently pry as much as disconnect the aspect button. Repeat this step for the opposite aspect button on the joystick.
| Joystick | Aspect Buttons |
|---|---|
| Left | L1/L2 |
| Proper | R1/R2 |
Disconnecting the Triggers
The triggers on the PS5 controller are simple to disconnect, making it doable to exchange them in the event that they turn out to be broken. This is learn how to do it:
- Take away the 4 screws on the again of the controller.
- Gently pry the controller open utilizing a plastic prying instrument.
- Find the set off meeting, which is held in place by three screws.
- Take away the three screws to detach the set off meeting.
- Rigorously disconnect the 2 ribbon cables that join the triggers to the controller’s mainboard. The ribbon cables are fragile, so you should definitely use care when disconnecting them.
- As soon as the ribbon cables are disconnected, the set off meeting could be faraway from the controller.
To reconnect the triggers, merely reverse the steps above. When reconnecting the ribbon cables, you should definitely align the white arrow on the cable with the white dot on the connector on the mainboard.
| Screw Dimension | Amount |
|---|---|
| T8 Torx | 4 |
| PH00 Phillips | 3 |
Separating the D-Pad and Face Buttons
Step 5: Eradicating the Button Ribbon Cable
Disconnect the eight-pin button ribbon cable from the motherboard by gently prying it upwards with a plastic opening instrument. Keep away from pulling or bending the cable excessively to stop injury.
Warning: Deal with the ribbon cable with care as it’s delicate and inclined to ripping. If the cable turns into broken, you could want to exchange your complete button meeting.
Step 6: Disassembling the D-Pad Meeting
6.1: Eradicating the Face Buttons
Take away the 4 screws securing the face buttons utilizing a Phillips #00 screwdriver. Raise the face buttons straight as much as detach them from the controller. Notice the orientation of the buttons and substitute them in the identical method to make sure correct performance.
6.2: Separating the D-Pad PCB
Disconnect the two-pin connector attaching the D-Pad PCB to the motherboard by gently prying it upwards with a plastic opening instrument. Rigorously raise the D-Pad PCB away from the controller.
6.3: Disassembling the D-Pad
To disassemble the D-Pad, gently press down on the middle of the D-Pad and take away the highest half. Then, take away the 4 screws securing the underside a part of the D-Pad and separate the person buttons.
Eradicating the Speaker Module
To take away the speaker module out of your PS5 controller, comply with these steps:
1. Take away the again cowl.
Use a T8 Torx screwdriver to take away the 4 screws holding the again cowl in place. Raise the again cowl off the controller.
2. Disconnect the battery ribbon cable.
Use a spudger to rigorously disconnect the ribbon cable connecting the battery to the motherboard.
3. Take away the battery.
Use your fingers to raise the battery out of the controller.
4. Disconnect the speaker ribbon cable.
Use a spudger to rigorously disconnect the ribbon cable connecting the speaker to the motherboard.
5. Take away the speaker screws.
Use a T5 Torx screwdriver to take away the 2 screws holding the speaker in place.
6. Raise the speaker out of the controller.
Use your fingers to rigorously raise the speaker out of the controller.
7. Troubleshooting: Speaker Not Working
If the speaker isn’t working after reassembly, test the next:
| Doable Trigger | Resolution |
|---|---|
| Broken speaker | Change the speaker |
| Unfastened connection | Reseat the speaker ribbon cable |
| Defective motherboard | Contact Sony for help |
Isolating the Rumble Motors
The rumble motors add an immersive contact to your gaming expertise, offering suggestions for explosions, impacts, and different in-game occasions. Isolating them requires some precision and care:
1. Find the 2 screws holding the rumble motor meeting to the controller’s backplate.
2. Use a T6 Torx screwdriver to take away the screws.
3. Rigorously pry the motor meeting away from the controller. It might be barely adhered, so use a plastic pry instrument to keep away from injury.
4. Disconnect the motor meeting’s ribbon cable from the controller’s mainboard.
5. Notice the orientation of the rumble motors. They have to be reinstalled in the identical place later.
6. Use a T8 Torx screwdriver to take away the 4 screws holding every rumble motor in place.
7. Gently raise every motor out of its housing.
Disassembling the Rumble Motors (Optionally available)
For additional disassembly, you’ll be able to take away the rumble motors’ plastic housings:
1. Examine the plastic housing for small screws or clips. Take away them.
2. Pry the plastic housing open rigorously, utilizing a plastic pry instrument to keep away from injury.
3. Notice the orientation of the gears and magnets contained in the housing. They have to be reassembled appropriately.
4. Rigorously take away the gear and magnet meeting from the housing.
Disassembling the Touchpad
The touchpad is likely one of the most vital components of the PS5 controller. It means that you can navigate the consumer interface, play video games, and work together with different gamers. For those who’re having issues along with your touchpad, you could must disassemble it to wash it or substitute it.
This is learn how to disassemble the touchpad:
- Take away the 4 screws on the again of the controller.
- Gently pry the again panel off the controller.
- Find the touchpad ribbon cable connector. It is a small, black connector situated on the highest of the motherboard.
- Use a spudger to softly pry the ribbon cable connector up from the motherboard.
- Rigorously raise the touchpad out of the controller.
Cleansing the Touchpad
In case your touchpad is soiled, you’ll be able to clear it with a tender material and a few isopropyl alcohol. Be sure you dry the touchpad utterly earlier than reassembling the controller.
Changing the Touchpad
In case your touchpad is broken, you’ll be able to substitute it with a brand new one. This is learn how to substitute the touchpad:
- Find the brand new touchpad ribbon cable connector. It is a small, black connector situated on the again of the touchpad.
- Use a spudger to softly pry the ribbon cable connector onto the motherboard.
- Rigorously place the touchpad into the controller.
- Change the again panel and screws.
Your PS5 controller ought to now be working correctly.
| Step | Motion |
|---|---|
| 1 | Take away the 4 screws on the again of the controller. |
| 2 | Gently pry the again panel off the controller. |
| 3 | Find the touchpad ribbon cable connector. It is a small, black connector situated on the highest of the motherboard. |
| 4 | Use a spudger to softly pry the ribbon cable connector up from the motherboard. |
| 5 | Rigorously raise the touchpad out of the controller. |
| 6 | Find the brand new touchpad ribbon cable connector. It is a small, black connector situated on the again of the touchpad. |
| 7 | Use a spudger to softly pry the ribbon cable connector onto the motherboard. |
| 8 | Rigorously place the touchpad into the controller. |
| 9 | Change the again panel and screws. |
Reassembling the Controller
Now that you’ve got eliminated all of the parts and cleaned them, it is time to reassemble the controller. Comply with these steps in reverse order to place all of it again collectively:
1. Reattach the L2/R2 Triggers
Align the L2/R2 triggers with their slots and snap them again into place.
2. Reinstall the Battery
Insert the battery into its compartment and slide it in till it clicks.
3. Reattach the Again Shell
Align the again shell with the entrance shell and snap them collectively firmly.
4. Screw within the Backplate
Use the 5 screws to safe the backplate to the again shell.
5. Reattach the Handles
Slide the handles again onto the controller till they snap into place.
6. Reattach the Directional Pad
Align the directional pad with its slot and push it in till it clicks.
7. Reattach the Buttons
Align the buttons with their respective slots and press them in till they snap into place.
8. Reattach the Analog Sticks
Push the analog sticks again into their sockets till they click on.
9. Reattach the Touchpad
Align the touchpad with its slot and push it in till it clicks.
10. Check the Controller
Join the controller to your PlayStation 5 console or PC and take a look at the performance of all buttons, sticks, triggers, and touchpad to make sure all the pieces is working appropriately earlier than you begin enjoying once more.
Tips on how to Take a PS5 Controller Aside
Taking aside a PS5 controller is a comparatively easy course of that may be accomplished in a couple of minutes. Nevertheless, you will need to take your time and comply with the directions rigorously to keep away from damaging the controller. Listed below are the steps on learn how to take aside a PS5 controller:
- Take away the 4 screws on the again of the controller utilizing a Phillips #00 screwdriver.
- Gently pry open the 2 halves of the controller utilizing a plastic pry instrument or your fingers.
- Disconnect the battery connector by gently pulling it straight up.
- Take away the six screws holding the motherboard in place utilizing a Phillips #00 screwdriver.
- Gently raise the motherboard out of the controller.
- Disconnect the ribbon cable connecting the buttons to the motherboard.
- Take away the 4 screws holding the set off meeting in place utilizing a Phillips #00 screwdriver.
- Gently raise the set off meeting out of the controller.
- Disconnect the ribbon cable connecting the analog sticks to the motherboard.
- Take away the 2 screws holding the analog stick meeting in place utilizing a Phillips #00 screwdriver.
- Gently raise the analog stick meeting out of the controller.
- The controller is now disassembled.
Folks Additionally Ask About Tips on how to Take a PS5 Controller Aside
What instruments do I must take aside a PS5 controller?
You have to a Phillips #00 screwdriver and a plastic pry instrument or your fingers.
Is it troublesome to take aside a PS5 controller?
No, it’s comparatively simple to take aside a PS5 controller. Nevertheless, you will need to comply with the directions rigorously to keep away from damaging the controller.
Can I substitute the battery in a PS5 controller?
Sure, you’ll be able to substitute the battery in a PS5 controller. Nevertheless, you will need to use a brand new battery that’s the identical sort as the unique battery.
